Customer Reviews for Lutron Claro 2 Gang Wall Plate for Decorator/Rocker Switches, Gloss, Ivory (CW-2-IV) (1-Pack)

Nice to have a color that coordinates better with light gray wall color. It matches the coordinating switch (Diva C.L 250W Dimmer for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, Palladium) perfectly.

This is an excellent wall plate not only that you will not see any screws but also when there is concern of grounding in old wiring. It's well worth it's price in terms of safety.

Like this product very much, look, and the way it is built

Great, resistent product. Gloss finish looks great. Easy install. Great for adding more than one Caseta in-wall dimmer together. Worth buying it.

Excellent Quality. Installation a snap. Very impressed.

This product comes in two pieces. The back piece screws onto the switches. The front piece snaps onto the back piece. This is how it gives the screw-less appearance. (It is the front piece that you see in the product photos.) If needed, the front piece can be unsnapped from the back piece. In the attached photo, it is installed in a bathroom over two Lutron dimmers and a Lutron timer. One dimmer controls the vanity lights and the other dimmer controls the shower light. The timer controls the bathroom fan. As a side note, the dimmers are rated to be used with dimmable LED bulbs.

Fits like it should, and looks good like it should. All the features and benefits listed came true in my world.

Although made of plastic this wall plate provides a sleek look. You don't realize how much better the plate looks without seeing the screws until you have this in one location and start noticing the visible mounting screws all throughout the rest of your house. It's of course easy to install and fits different style and brand switches that are of the "rocker switch" size (see my photo). Just make sure your switches are plumb and level in the junction box or they'll be visibly crooked.

I bought three different faceplates to test out - 1. Cooper (Aspire) Left, 2. Lutron (Claro) Middle, 3. Leviton (Decora Plus) Right. As many other reviews have pointed out it is a breeze to install and it works well I won't focus on that. I am showing the difference in size between all three. You can see in the pictures that they go in size from small medium and large. I chose the Claro because of its mid range size compared to the too big Cooper and too small Leviton. Even though the size is very minor, it's interesting to see the variation between all three. I can also agree that the Leviton feels much more flimsy than the Lutron. I also feel like the grooved edges give it some character over the other flat edged ones.

I grabbed a handful of these Lutron screw-less wall plates to go with some new dimmers and switches. I have a few timer switches, a WiFi switch, and now a number of connected dimmers. All of those switches use the Decora wall plates so I decided to switch out all the old toggle switches and plates in my home to these as well. The Decora rocker style switches along with these Lutron Screw-less wall plates have a very nice modern and elegant look. They are easy to install. The bottom piece goes over the switch then the top piece snaps into place. I love that these are easy to clean with just a damp cloth. I read another review that stated that it is difficult to separate the top and bottom piece. I have to agree but I use a flat head screwdriver. I just pry the screwdriver in between the two pieces and gently twist. I'm glad these plates are inexpensive since I plan to change all the plates in my two story home.

I grabbed this screw-less plate to install with a new dimmer and rocker switch. I was glad to see my local HD has them in stock. The bottom piece installs over the switches then the top piece snaps into place. These Lutron screw-less plates are easy to install. They give any room a clean, modern, and elegant look. They are also easy to clean.

I grabbed a few of these to install along with new dimmers and switches in my house. The bottom piece screws on over the switches, then the top piece snaps into place. I like these wall plates because they are simple to install and they are a fairly inexpensive way to add an elegant finish to a room or an entire home. They also clean up very easily with just a damp cloth. I have a heavy texture on my walls so the bottom piece does not sit flush all the way around. Also from the side, you can see the bottom piece under the top piece. Neither of those issues bother me and I really like these screw-less plates. They are not expensive but replacing an entire home might add up.

Purchased to fit Lutron switches, fit the switches fine, easy to install. I would purchase again.

Nice modern and clean look will recommend those plates... I was able to install them myself.

After completing a whole-house remodel...it was time to take a look at all our choices regarding electrical. I've always been annoyed by wall plates with visible screws in them. I was aware of these plates for quite some time, but I had no idea what a difference they made, and not just as a visual enhancement. Not only do these wall plates come in a plethora amazing colors and finishes....but they offer stone look, glass look, metal, and so on. I chose the Claro line, in satin, and the colors and finishes were offered in at least 30 different choices. I recommend you go to the Lutron web page to see for yourself, but order them here from Home Depot, because Lutron charges more. Beyond the color and finish, these are built very well, very sturdy, and rich looking. As I mentioned earlier, they also show no screw holes, and there are actually TWO plates...the skinny "under-plate" which has the screw holes and the hardware attaches to...and the decorative "over-plate" which is the part you see. They simply snap together with your fingers. No special tools or knowledge is required...they go in just like normal fixtures, but the actual plugs and switches are mounted to the under-plate....rather than the traditional mounting to the wall. I needed this because several of my outlet boxes were older and worn out a little...and it was too late to install new ones. That said..these plates go in better, and feel more solid, as a result of this design, in my opinion. At any rate, I highly recommend the. Yes, they are expensive, but if you want a more rich look, and you are sick of seeing screws in your wall plates, these just may be the answer. Don't tell anyone this...but my wife and I don't trust color quality online...so we called Lutron directly, and asked them to send color samples....and they did. For Free. The color samples also were made of the same material, so we got to see the various material looks to, and that way we knew exactly what to expect when our order came in from Home Depot. We absolutely LOVE these...I think you will too!

Installation is a snap. Once the undermount is lined up with the electrical box it simply a matter of fastening the screws and snap on the plate.

Disappointed with the leviton screw-less face plates. we cant remove them without damaging the outlet or dry wall. very difficult to remove.

unbelievable, on the home depot website showing an example out of code! In the second photo, the outlet is upside down! this is not allowed in the code! and there are two switches with one outlet, you can't do it either!

This item will be used for our bathroom upgrade.