#1 Home Improvement Retailer

Customer Reviews for Lutron Skylark LED+ Dimmer Switch for Dimmable LED and Incandescent Bulbs, 150W LED/Single-Pole or 3-Way, White (SCL-153PR-WH)

Internet #203811492

Model #SCL-153PR-WH

Store SKU #425107

  • Dimmer switch provides best dimming performance for LED bulbs
  • Easy to use slide control to adjust lights for any activity
  • Works in a 3-way switch or single pole application

Customer Reviews

  • 4.7
    out of 318 reviews
  • 91% recommend this product
Filter by:
Showing 1-30 of 318 reviews
Great dimmer switch, works pretty good with my Sunco recessed lights (I get some flickering but r...
Great dimmer switch, works pretty good with my Sunco recessed lights (I get some flickering but rarely). Works on single pole or 3-way. This switch takes up a good amount of room in the box, so try to install it in a deep one if possible. Instructions were laid out well, installation was easy.
by
  • Recommended
1 found this review helpful
Replaced same/similar product that was installed about 10/12 years ago. Works well and their cus...
Replaced same/similar product that was installed about 10/12 years ago. Works well and their customer service was excellent.
by
Response from THD Customer ServiceMay 4, 2018
"Dear Valued HomeDepot Customer ​Thank you for sharing, Dom. One of Lutron's core principles is to take care of the customer. We are so glad customer service was able to assist you and are glad to hear you are enjoying your Skylark dimmer. "
  • Verified Purchase
  • Recommended
Works for me
This is an unbiased review that is unaffected by the fact that I received this product for free. As proof of impartiality, just click on my nickname and see the average of the ratings I have given over 200 reviews to date. ==== First impressions ==== Simply packed in one box with 3 smaller boxes inside. Instruction sheet and hardware (except cover plate) included. ==== Installation ==== Easy as any dimmer. Unless you are using this on a 3-way circuit, there are just the three wires to attach (green (ground), black (line), and red (lamp)). The green ground wire is simply crimped to the metal front plate. The 4th wire (red/white) is left alone with a wire nut to keep it from shorting to anything else. If you have a 3-way circuit, the 4th wire is used for that circuit but there can only be this one dimmer on the circuit; the other control must be a regular 3-way switch only. ==== Operation ==== This works as it should. The switch is used to turn on and off the lamp and the slide control is used to set the dimming level That way, the level can be set one time and left there if needed. On the screw-in bulb type LED lamps I used, the lowest setting produced light at near nightlight level, very low. I did try this dimmer on 3 other large lamps that were not advertised as dimmable with this type dimmer and they all worked; but 2 of them did buzz a little at the low level. I would not recommend using it on these types of lights even if they seem to work. And all 3 gave about 50% light at the lowest setting. I recommend using this for LED or CFL only; because for incandescent lamps, you can use a much cheaper type. ==== Summary ==== Works as advertised, and for 3-way circuits also. Controls are functional without much flickering during light transitions. This may save a little money by buying the 3-pack. Dress cover plates are not included.
by
  • Recommended
`
I bought 6 Cree CR30 65W equivalent bulbs and noticed with the Lutron Skylark Incadescent only dimmer (previously installed) they would flicker very fast and annoy me. So, I did some research and found this dimmer is approved by Cree and also by Lutron in independent tests for their Cree 65W equivalent BR30 bulbs. Easy installation and once it was installed, I did not see it flicker at all on any setting of the dimmer. In addition as you can see in the attached, the lowest setting on this SKYLARK 150 WATT 1-POLE 3-WAY PRESET CFL/LED DIMMER is the top bulb pictured and the other bulbs are the old Incandescent switch's lowest setting...as you can see the lowest setting is much more on par with an incandescent bulb in a dimmer. This really helps with the LED bulbs sold at HD so I would recommend using this device to dim LED bulbs.
by
  • DIY
  • Recommended
3 found this review helpful
by
  • Verified Purchase
by
  • Verified Purchase
I was able to get the exact same switch that needed replacement. Easy to do.
by
  • Verified Purchase
Holly was excellent and extremely helpful to me. Thank you!!
by
  • Verified Purchase
by
  • Verified Purchase
by
  • Verified Purchase
by
  • Verified Purchase
Very easy to install and looks good
by
  • Verified Purchase
by
  • Verified Purchase
by
  • Verified Purchase
It’s really true , it took less than 15 minutes to install this dimmer.
by
  • Verified Purchase
Works great. My only criticism is that the wires from the dimmer are very stiff and were difficult to twist with the wires from the wall.
by
  • Verified Purchase
Works much better the the old lutron dimmer, better range.
by
  • Verified Purchase
by
  • Verified Purchase
IT DIMMED THE LIGHTS BUT IT WAS UNABLE TO DIM MY NEW PENDANT LIGHTS ENOUGH. THE LITTLE SWITCH ON THE SIDE IS ALL THE WAY DOWN BUT IT STILL DOES NOT DIM THE LIGHTS ENOUGH. CAN ANYONE HELP ME PLEASE ?
by
Response from lutronJan 3, 2024
Hello! Currently, there's no industry standard or regulation for manufacturing LEDs, which is why performance varies with dimming controls. That's why we extensively test a variety of LEDs from many different manufacturers and offer a mobile-friendly web tool to help you select bulbs that provide the best dimming performance with your Lutron dimmers. To access the tool, please visit lutron.com/ledfinder.

If you have additional questions, please reach out to our Support Team at support@lutron.com or give us a call at 1-844-LUTRON1. lutron
  • Verified Purchase
Ease of installation and ease of use.
by
  • Verified Purchase
by
  • Verified Purchase
Easy to install, works as described
by
  • Verified Purchase
Had to replace an existing switch. Easy to install and easy to use. Like the on/off switch and the separate dimmer switch
by
  • Verified Purchase
works great. love it
by
  • Verified Purchase
Replaced an identical switch that had stopped dimming. Hope this one lasts longer. Easy to replace.
by
  • Verified Purchase
Bought 2, 1 didn't work so had to return one and buy another. The electrician I hired wasn't happy for the delay!
by
  • Verified Purchase
It worked and was easy to install. I will not be reviewing every purchase I make at Home Depot!
by
  • Verified Purchase
I returned this because it wouldn't work with my existing wiring
by
Response from lutronOct 20, 2023
We're sorry to hear that, you were unable to install the Skylark dimmer.. Lutron does offer installation help at lutron.com/support with step-by-step guides, videos and more. If you still have questions, please reach out to our dedicated Customer Satisfaction team at: customersatisfaction@lutron.com, or call us at: 1-844-LUTRON1. We're here 24/7, so please call us anytime. lutron
  • Verified Purchase
Works great and easy to install
by
  • Verified Purchase
by
  • Verified Purchase
Showing 1-30 of 318 reviews

Frequently Bought Together

+
+
Price:
$25.97