Customer Reviews for Lutron Toggler LED+ Dimmer Switch for Dimmable LED and Incandescent Bulbs, 150W LED/Single-Pole or 3-Way, Ivory (TGCL-153PH-IV)

Works as advertised. Elegant and smooth.

Fits perfectly into a 4 gang swith box. No problems.

Installed easily and works beautifully in my (almost) fully remodeled kitchen and breakfast room! I've already decided to purchase additional dimmers for other rooms in my home.

I bought this dimmer switch a couple of weeks ago to replace a standard three pole switch so that we could dim some new dimable LED lights I just installed. It was fast and easy to install and the dimming intensity instruction were also easy to follow. I also like using Lytton products .

This switch works perfect. We used it in the kitchen on a Halogen fixture that was too bright over the sink. It dims to a amber glow and could be used as a night light. It works great with our hardware too.

Easy to install works great!!

I looked at the dimmer and then measured it with my volt-ohm meter. Not a direct connection, which was not expected, but on the meg-ohm scale, there was a reading. Looking at the diagram, it was obvious the meter was telling the truth. The lower right, odd colored screw is the common (input) and the left is the normally open (off) with the toggle down. I wonder if the "on/off reversed" commentators even looked at the pictures. That was all I needed to do to get it right. Connecting an output to the circuit hot wire, instead of the input, might well blow out the dimmer circuit. Look first.

Kind of an interesting setup. There is the regular throw on/off switch...and a sliding dimmer along side of it. Easy to install with all necessary hardware included. I hooked this to a chandelier hanging in my dining room that has 5 dimmable LED bulbs. The dimmer does a great job and works as it's suppose to. The only con is the switch is different from a regular switch in that the OFF position is up and not down. The assembly is marked "this end up" which puts OFF up. I'm guessing that's so the dimmer slide is easier to use and it takes little getting use to.

I am very happy with the light switch. Easy to install and works great

Work great and gets an incredibly low level at the dimmest setting. Mine has a slight delay before the lights turn on, but NO flickering. The key is to buy the bulbs listed. I didn't, and had flickering and dimming problems. The right bulbs solved the problem.

In May of 2017 I purchased 8 BR30 dimmable led bulbs and then looked for a switch that would work in our 3 switch wall plate. This looked OK to me so I brought it home from Home Depot, removed and replaced the 8 old bulbs, removed the old 3-way switch and installed the new Lutron switch. Worked perfectly and the dimming is fantastic. I don't know the exact percentage range of the dimmed lights but they go from full light to less that half light (and maybe the actual low dimming rate is a lot less than half). We are as happy, maybe happier, with this setup as we were with an old dimmer controlling the previous 8 incandescent bulbs. The 3 attached photos were taken on a sunny day in Georgia at about 11:30am. Still easy to see the dimming capability of this switch.

Functionally, 5 stars... very pleased. It's mounted in a 4 gang box, and this version of 'light almond' does NOT match the other light almond switches right next to it. It's not a big deal, but I wish it did, catches my attention every time.

I Love the style of these dimmers, they look like a regular switch but have a small slide dimmer on the side and still fit into a regular switch cover.

After purchasing a more aesthetically pleasing dimmer switch and installing it myself, my wife and I were disappointed in the momentary (millisecond), sporadic flickering of the LED recessed lamps that the switch controlled. The brief, inconsistent flickering didn't seem to be affected by the operation of any other circuits in the house. I calibrated the minimum dim ability of the problem switch several times trying to make the flickering stop. None of that seemed to help. After thoroughly studying the accompanying literature for the LED lamps, I brought it along with me to the local Home Depot. This switch was the only switch I could find at the dimmer display that my installed dimmable LED lamps stated would work with. Remember - both the LED lamps and the first dimmer switch had printing on their packaging that stated they were compatible with each other just not specific model/part numbers. After purchasing and installing this switch I have been extremely satisfied with the results. I'm so happy with the way it works with my dimmable 4" recessed LED lamps, I copied the exact same setup in another room. I also plan to install the same thing in a 3rd room when I get to that point in construction. The switch is easy to install and easier that the first switch I bought to calibrate. It also accepts standard single gang switch cover plates. Now I'm happy and saving a little cash while these lights are operating to boot!

Needed a dimmer switch for my 2nd floor condo inside stairway entrance. This switch was easy to install and helps me conserve energy while providing a bit more ambience to the entry to my condo.

No stars for reliability as no way to know if these will last the test of time. Can say they like weigh nothing… all aluminum and plastic, not a solid feel but I’m buying electronics. They DO NOT HAVE BACKWIRE clamp plates under the screws, just the flakey stab-in holes. I hate wrapping the wire under the screw after using commercial grade devices with the backwire plate under the screw… costs the mfrs almost nothing but so easy to wire and make changes later. More stars IF had good backwire.

Easy to install just by following the instructions.

Works well with a variety of LED bulbs and light fixtures.

I bought this switch to replace the identical switch which I purchased only 2 months ago and which has already failed.

Great quality, easy to install. Love the slider and it takes nothing more than changing out a standard switch.

works fine recommend

Very easy to install. Includes instruction for 3-way switch also.