Customer Reviews for Milwaukee 3-1/2 in. 120-Grit Triangle Sand Paper (6-Pack)

Perfect for my application. Among a thousand other things, I turn a lot of wooden bowls. Often, I use a sponge backed circular sander for refining the inside of these bowls. However, this process tends to leave tool marks around the edges. Because the oscillating sander is far less aggressive, particularly on softer woods, it simplifies the process greatly and reduces finishing time. There are countless other processes that I use the varying grits for and find them long lasting and efficient. These pads are truly a great choice for most detail applications.

The Milwaukee 3-1/2inch 120-grit triangle sand paper utilizes a hook and loop technology for fast and secure paper change and an universal hole placement to allow for use with dust extraction systems. While installing a replacement shower system, I had to shave the width of the shower flange and a wall filler panel for a perfectly square corner. The sanding pad mounted to an oscillating tool allowed me to sand any excess material left from my saw cut.This process and the oscillating pad gave me complete control to sand the line straight.

Good quality sandpaper pad for oscillating saws.  Removes old paint and stain quickly without gumming up.  I used these sandpaper discs to get into the tight spots on a set of adirondack chairs that need refinishing.  I used a regular sander to take the bulk of the old finish off and used my Rockwell corded oscillating tool to get between the slats and other spaces the sander could not reach.  These worked well at removing the old finish and smoothing things out.  My only complaint is they did not stick as well as other discs I have used.  The felt on the back of the discs tends to fray with use and then the disc falls off.

I received the Milwaukee 3-1/2 in. 120-Grit Triangle Sand Paper (6-Pack) part # 49-25-2120 the sanding pads are made to use with the Milwaukee Oscillating Multi-Tool and the Milwaukee 3-1/2 in. pad, but should work with any 3 1/2" triangle hook and loop pad. The system uses Hook and Loop technology for fast and secure paper changes. The universal hole placement allows for use with dust extraction systems. They worked great removing some varnish and paper from a wall I was sanding, and the tip of the triangle made it easy to get into the beveled edges of the wood planking.

Let me say that this is a very good angle sand paper used for multi/oscillating tools however, it didn't fit my needs. The product says it's universal fit however, the pad is bigger than my Ridgid sander base. I'm not sure if because my multi tool is older that it is a smaller head but regardless it doesn't fit. Even though the sand paper is bigger, it can be cut to fit, and works extremely well. It can fit into all groves as you would expect. I compare them to the Diablo brand that fits perfectly and they do just as well. I am assuming that the a Milwaukee tool is 3.5 inches where the Ridgid is slightly under 3, which seems odd since they are all aligned. None the less, the paper is good but takes an extra step to fit my rool. Maybe it's universal fit because it can be trimmed?

Milwaukee 3-1/2 in. 180-Grit Sandpaper for Oscillating Multi-Tool (6-Pack) Nice 180 grit 6 pack of sandpaper for universal oscillating multi-tools. Universal dust extraction holes help minimizie dust while using your multi-tool as a sander. Universal fit and open loc anchor. Fits the sanding pads with hook and loop grips. I personally have and use the Milwaukee M18 fuel multi- tool and recommend all the Milwaukee accessories for it.

I received my Milwaukee universal fit triangle sandpaper (6 piece) 180 grit in good condition. The sandpaper sticks well to the Milwaukee triangle pad I have. I tried it on my Milwaukee M12 oscillating tool, and it fit well. I tested the paper on some pine, and between the tool and the sandpaper, it removed paint and rounded the corners with ease. I can’t say much about the longevity of the paper since I only did a test. However I have previously used Milwaukee paper and I like it. This paper is made in China for Milwaukee tool.

The packaging clearly lets me see the Grit Size and how many are in the package. This triangle shaped sandpaper is designed to be used with Oscillating Multi-Tools. I have an older Craftsman multi-tool but the Milwaukee brand pad and sand paper work great with it. The paper has the locking with hoops system and attaches easily and stays in place while using the tool. Changing the sand paper is a breeze and quick! The dust extraction hole placements on the pad allow me to use my wet/dry vaccuum attachment tool, keeping the surrounding areas cleaner making clean up more efficient. I used Grit 80 prior to using the 120 to help even out and clean up the surface. Using this 120 grit paper as the final sanding step gave a very smooth finish and makes my project look like I paid a professional. Lastly, the packaging clearly lets me see the Grit Size and how many pads of paper are in the package. Each pad really does last quite a while and I think one package should last long enough for me to finsih the 3 doors I am working on. I'm really happy with these and will buy more. I'm hoping to not have to use the block for sanding ever again.

Fits Milwaukee fuel multi tool perfectly.

Fits the multi tool perfect.

Rating provided by a verified purchaser