Customer Reviews for Milwaukee 44-7/8 in. 8/10 TPI Metal Deep Cut Extreme High Speed Steel Band Saw Blade (3-Pack) For M18 FUEL/Corded

Cuts stainless pipe like it's nothing. The fine blade you can only get maybe 2 cuts with. This blade shreds right through the same material.

Save your self some money and aggravation and buy Lennox brand. I didn’t even get 8 cuts into #5 rebar before it went dull. I wasn’t working blade hard. Bought Lennox brand and it’s like night and day. Would never buy this again!!

Just for reference when I bought my bandsaw it came with an 8/10 TPI extreme metal blade……and it cut 3/8” thick angle iron like a hot knife through butter. I bought the 3 pack to use as replacements, and the first two blades I used had extreme blade wobble, like it was a bit too long or not tight, and the teeth on both wouldn’t cut correctly. The third blade cut like it should and was equal to the blade that came with the saw. I think Milwaukee has some QC issues going on with their bandsaw blade production. Basically bought three blades and only one was useful.

Bought the M-12 compact band saw and blades cut copper fine but threaded rod and sch 40 pipe are a big no. Really disappointed in the blades,

Good blade cut though steel like butter

I have zero complaints so far. Strong and stable blade that lasts a while. I use it on all the metal fabrication parts I do from 1 3/4 DOM Tubing to 4" rigid tubing for electrical. Highly recommend.

Good blades for a great saw

The box says for thick metal. I bought the blades to cut 2 3/8 and 2 7/8” oilfield pipe. I only got two cuts before the blade was so dull it would not make another cut! After a friend said I needed the 24 teeth/ inch blades I got 15-20+ cuts with those blades. Don’t believe what the box says about cutting thick metal!!

I would not recommend Milwaukee band saw blades for cutting thick steel. It wasnt bad for non welded steel such as angle and bar but welded steel like tubing these blades miss the mark. The 3 pack of blades made it through a total of 3 cuts when cutting 2x2x1/8" tubing and when the blades hit the tube weld, it stripped the tips of the teeth. I switched to a different blade manufacturer and have made 10 cuts so far with 1 blade with still plenty of life.

Cut 12 pieces of 7/8 316 Stainless steel allthread with one blade. Didn't get hot and still sharp enough for more work.

Work great for demoing steel pipe.

Love milwaukee products

Blade dulled out after one cut on pipe. I went thru 4 blades in 30 minutes, which is pretty expensive, but I do not know what material I was cutting. I will try 12/14 tooth next time.

Rating provided by a verified purchaser

I bought a 3 pack and the first blade I used wouldn’t cut anything!Turns out the teeth on it were cut in the wrong direction! Luckily the other 2 blades were good and cut 3/8”tubing effortlessly.

I had high expectations with this blade and i was so wrong. It only handles 1 cut for cast iron and then gets dull. Definitely not worth it.

better quality than like priced products. price per band is the same as harbor freight.

Rating provided by a verified purchaser

Rating provided by a verified purchaser