Customer Reviews for Milwaukee 9 in. x 72 Carbide Teeth Aluminum Cutting Circular Saw Blade

[This review was collected as part of a promotion.] Great blade for cutting aluminum and other soft metals. My husband has been using it to cut wood as well, but it’s not the best for curing wood, works great for soft metal like aluminum. Would recommend it for any type of soft metal cuts.

[This review was collected as part of a promotion.] The Milwaukee 7-14" Metal cutting circular saw blade works great with my cordless circular saw. I am using this blade to cut 1/4" aluminum sheet and corrugated 29-gauge roof panels. It cuts like butter through both materials. The blade seems to track well and provides burr-free straight cuts with ease. I am using this blade without additional lubricant and it seems to cut well without getting too hot. So far I am very happy with this blade.

[This review was collected as part of a promotion.] I got the Milwaukee 7-1/4 metal cutting circular saw blade for my husband and he was overjoyed when I showed him this blade. He immediately went out to the garage and started to use it . He said it was the best blade he's ever used. Thanks you for a very very happy husband.

[This review was collected as part of a promotion.] I have been doing some work on an old outbuilding getting ready for the winter to come and needed to replace some tin and always wanted a saw blade that was up to the task. This Milwaukee Metal cutting blade knocks it out of the park. Not only does it cut like there’s nothing there it’s not excessive in noise doing it’s job. Great choice and can’t wait to try it on something a little more hefty then just tin sheathing.

[This review was collected as part of a promotion.] I don’t do a lot of metal cutting but did have a small home improvement project I was working on recently and was glad to get this blade. It made my job a whole lot easier. It cut smoothly through the pipe I was cutting as well as the aluminum sheets and rail pieces I was working on. The edges were smooth and not jagged so that was a plus. I was using a cordless saw and it did the job perfectly. Overall I was very impressed with how well this blade cut. Oh and be sure to wear some safety glasses as as there were bits of metal shavings when sawing.

I received the MILWAUKEE 9 IN. X 72 CARBIDE TEETH METAL CUTTING CIRCULAR SAW BLADE to test for The Home Depot. I used it with my sliding miter saw to cut standing seam roofing for my pergola and it worked great! Ran through the pieces like butter. What i really liked is the packaging. It is perforated for opening so that it can be used for storage as well. Simple but a great idea.

I can use this 9" blade on my table saw with no problems. It cuts thru the aluminum all day and never seems to get dull. It doesn't get clogged up with the shavings and runs cool and clean. I like how it cuts a clean edge with little or no effort. On the job site I dont have to keep changing the blade to cut the different metals that we are using. The blade doesn't burn up like some cheap blades and it lasts all day. This is a great blade and has multiple uses on the site, Good choice.

I needed to cut some aluminum shower door hardware as part of a bathroom upgrade. Due to the size of the pieces and type of cuts to be made, I used this blade in my 10-inch table saw. This blade is for a saw with a one-inch arbor – but since my saw has a 5/8-inch arbor I had to use a brass adaptor. This blade seems to be top quality. The carbide-tipped teeth have an alternate top bevel grind, and there are numerous laser cut vibration dampening slots to minimize heat buildup and noise. It is designed to cut without any water or oil lubrication, which eliminates the hassle and mess. This blade worked flawlessly on the parts I cut and produced a fairly smooth finish. I am very satisfied with the quality and performance of this blade.

This Milwaukee 9” diameter 72 tooth aluminum cutting blade powers through 3/16” aluminum like cutting through wood. The resulting kerf is precise, clean and smooth. I also cut a piece of 3/8” Plexiglas. The cut was as precise and clean but with a minor amount of spalling along the edge on one side. It is possible that a slower feed might reduce that. I do not own a hand held saw with a one-inch arbor or for that matter a hand held saw that can accommodate a 9” blade. I used this in a corded 10” bench saw with a 5/8” to 1” adapter to clean up some scrap to try it out with great results. In the past I have used either a jigsaw or reciprocating saw to make these cuts and then had to clean them up by filing or grinding. Very difficult to get a long smooth straight cut that way. This is a very nice and welcome addition to my workshop. One negative is the packaging. It definitely protects the product – with vigor! It would have been nice if the packaging could be more easily reused for storage between uses. It is very difficult to initially remove the blade from the package and getting the blade in and out through the opening made in the back of the package is difficult when using it for storage.

9 in. Carbide Tooth Metal Circular Cutting Saw Blade. Designed for softer metals, aluminum, brass, copper and plastics / fiberglass. Fairly thin blade. I'll use mine to do some wood cutting. This blade has 72 teeth. Arbor size (center hole) is 1 in. I'll need a 1 in to 5/8 in. adapter to use it on my saw. If you are going to store the blade, I'd modify the original plastic packaging and store the blade in that. Will protect your hands from the sharp teeth.

[This review was collected as part of a promotion.] I have been using this blade for a lot of projects since I got it. It makes getting the job done a breeze. I used it to cut through sheet metal on a project and the blade cut through with no hesitation. I also used it on another project to cut through real aluminum siding and it cut as if I was cutting through butter. That was after I had already used it on a couple of previous projects. The blade didn’t get dull or lose its sharpness at all. Very happy with this blade. Made everything a lot easier and cut my work time in half. Another good tool to add to my collection, would definitely purchase in the future.

[This review was collected as part of a promotion.] I received this a couple of months ago. The blade does a nice job on the tubing I was cutting. It was fast cutting and clean. I do a lot of fabricating and have wanted one of these for quite some time. Appears to be good quality.

[This review was collected as part of a promotion.] needed a replacement and this was available. I got it and I must say that it cuts great. Fit my saw like a glove and did everything I needed it to. If and when I need another replacement or any other size, I will absolutely be purchasing Milwaukee. Highly recommended

[This review was collected as part of a promotion.] My husband had multiple projects around the house and needed a new saw blade to finish them. So we decided to give this one a shot. It worked great. It fit nicely in his small saw. He was able to finish the steps and deck all with no issues. No over heating of the blade. It didn't break or dull. Worked out great hubby was very happy with it

[This review was collected as part of a promotion.] We love this metal cutting blade by Milwaukee. We made a metal and wood planter from reclaimed materials we had on hand. Cutting the old tin was so much easier with our new Milwaukee blade. We will definitely purchase different blaaaade types for other projects.

[This review was collected as part of a promotion.] My husband has been using his metal cutting circular saw blade on his skill saw. Makes straight and accurate cuts. Great for all your construction needs. Does amazing on metal sheets ply wood ect. Nice sharp blade that last.

[This review was collected as part of a promotion.] The Milwaukee 7-1/4" Metal Cutting Circular Saw Blade worked exceptionally well for my latest project! The quality of the metal is phenomenal and I did not have any issues with installation or burrs after each use. I will most definitely be using my Milwaukee blade for future projects!

[This review was collected as part of a promotion.] My husband loves this metal cutting circular saw blade. He is forever in his building making crafts or projects for the house. He says that this blade has come in handy for so many of his projects. The metal cutting blade is a wonderful addition to anyone who works with power tools. The blade was shipped very fast even with the delays in packages these days. Just over a week and it was here. Packaged well with care to the person opening it to not get hurt.

[This review was collected as part of a promotion.] This Milwaukee blade is an excellent quality blade. It cuts very well and stays sharp for a long time. Perfect for slicing through metal without any issue. Fits great on a standard circular saw. Milwaukee is always trustworthy and durable, and this blade is proof once again.

[This review was collected as part of a promotion.] This blade is excellent for tough work, it cuts very well and precisely. It is very strong and durable, it is a good savings and a great value for your money. Yes, I recommend it for its quality and durability.

[This review was collected as part of a promotion.] This metal cutting saw blade is excellent!! It does exactly as it advertises and doesn't dull very fast. It's made from high quality materials and put together excellently. I would highly recommend this metal cutting saw blade

[This review was collected as part of a promotion.] I bought this about a month ago because I was curious as to how well it would cut. I haven't seen a blade like this for metal. I will say it was a smooth fast job. I definitely loved how it handled. Will buy again.

[This review was collected as part of a promotion.] Wow, such a great blade and smooth cutting. So easy to put on my saw. So nice and the blade is very sharp and in good condition. Cuts very well and gives me no problem taking off the blade if needed. Must have.

[This review was collected as part of a promotion.] The Milwaukee 48 tooth metal circular saw blade cuts through steel like butter. It can cut through steel, aluminum ,angle, iron ,all thread and strut. The blade is 7 1/4 in fit on a standard circular saw

[This review was collected as part of a promotion.] I have not used this item, nut my husband has. He does remodeling and when he used this blade to cut some gutters that needed to be replaced, He was very happy with how clean the blade cut. Made his job a little easier. He loved it.

[This review was collected as part of a promotion.] This saw blade works well even cutting PVC pipe. I have used it on cutting metal, wood and PVC only because I did not want to change the blades inbetween each cut. The cuts are all smooth. It still feels as sharp as when I first received it and I have used it several hours on several different projects.

[This review was collected as part of a promotion.] I needed a 7-1/4” blade for my hand saw. So far it’s done the job and still in good shape. Definitely made well and the blades are still sharp considering how many pieces of wood I have cut to build tables etc. Usually after about 15 cuts my blades get dull but so far I haven’t had that issue. Definitely going to be sticking with this brand.

[This review was collected as part of a promotion.] Cuts right through the aluminum sheet that I needed to cut. I wanted to make an aluminum game set and it worked perfectly for that. It even worked to cut each individual bean out for the tossing bags which was pretty cool

[This review was collected as part of a promotion.] I’ve used this blade to cut tin and it does a great job. It cuts precisely and the blade is holding up very nicely. I have used it on two different skill saws and it works great on both. This is definitely one of the better quality blades I have used.

[This review was collected as part of a promotion.] I got this blade to use on a job I was doing on my deck. It was easy to get through any cutting job I was doing. I am very happy with the metal cutting circular saw blade and recommended my neighbor get one.