Customer Reviews for Milwaukee X-Large Red Latex Level 3 Cut Resistant Insulated Winter Dipped Work Gloves

At last a glove with more dexterity for winter tasks! These even have the smartwsipe fingertips so you don't have to take them off to answer the phone. I love that they come in a smaller size for us women. They have a puncture rating of 3 perfect for farm tasks.They have a breathable fabric on the back as well so i am thinking these will be year round for me. Love Milwaukee stuff!

The Milwaukee Red Latex Gloves are great for all uses. I do a lot of electrical work and these Gloves save my hands from the wear and tear. The latex provides a good gripping surface. I do a lot of outdoor yard work so I wear these gloves almost daily. They run true to size. Have given a pair to both men and women who have tried them and loved them. They are very reliable for all use and I recommend.

Good quality as all Milwaukee products and instruments have. The gloves feel warm and comfortable on hands. The outside rubber provides strong grip and flexibility; the inside liner is soft, nice on touch and keeps warm quite good. I don't have to work as a construction worker on cold, but I use the gloves to shavel snow, to put on chains on the car tires, to drive while cold. They work good for me so far. I haven't find any cracks or tear offs yet. I don't regret buying them.

I stocked up on these gloves and recommend everybody else does the same. These are perfect for everything from gardening to working on my truck. The gloves are really well made and have held up better than expected. They’re thick enough to be warm in cold weather and keep you from busting your knuckles but they’re very easy to work and keep a grip on small objects

These are GREAT gloves. My hands stay nice and warm while walking the dog (or even working outside) during low temperature days. The black-dipped palms and fingers really provide protection against abrasion and punctures. This is very handy while collecting and bagging tumbleweeds or doing other tasks where normal gloves won't give you protection. The texture of the fingers allows a good control of things you need to hold or manipulate. The cuffs fit snugly on your wrist to keep out debris that normal leather gloves won't. The bright red makes them visible in a work environment.

These are great gloves for general chores around the house or on the job. These have a level one puncture and level two cut rating meaning they offer basic protection but Milwaukee sells other gloves with higher ratings. These gloves allowed me to pick things up and use wrenches but I could not operate my touchscreen phone-not a deal breaker as I don't mind removing the glove to use the phone. I ran the gloves under water. I did not feel water getting through on the palm side. On the top side, I felt some dampness. I don't expect these to be waterproof but it is nice to know they resist water. I see any glove as a consumable; wear and use gloves enough and they wear out but I think these will last. They are washable, they seem to retain their shape. They fit my big hand which surprised me. They are comfortable. These gloves are for dexterous jobs. They are good for gardening, plumbing, carpentry, painting, auto work, and handling tools. I use mine when cutting wood with my chain saw; I like the feel and the grip. When it comes to gloves, one size or type never fit all and every situation. However, these are great gloves for me when I do work around the house. I like these gloves. They look nice, they have a fair price point, and they are useful. I can recommend these gloves 100%

I wear work gloves all the time while working on projects around my yard, including gardening, woodworking, and many of my power tools and I am looking forward to using these. They are marked “Size 7” and I usually wear a 6-1/2, but these don’t seem to be too large. I like the cushioning, and they feel good on, not to mention my favorite color is red! (Win-win-win!) I imagine these should last just as long as other top-notch gloves – I usually go thru at least two pairs of gloves each year, so a 12-pack should last me a while.

I’m always on the lookout for a great pair of gloves and these Milwaukee cut level three gloves are just about perfect. They offer amazing dexterity and grip for this cut level of glove. Usually you will lose a lot of dexterity when the coating on the glove gets to a certain thickness, but these Milwaukee gloves have no loss in dexterity at all. I think a lot of it has to do with the texture of the nitrile coating on them and the overall design of the glove. These gloves will help keep your hands warm no matter how cold it is outside with their acrylic terry liner and your hands will stay perfectly dry due to the double dipped nitrile coating on the outside of the gloves. Milwaukee states that these gloves are ideal for demolition, wire-stripping and pipe threading but they can honestly be used in far more applications. I find them perfect for fixing a broken roof tile, cutting up branches off the trees in my backyard, carrying any item that is slippery, has a rough surface or a rough edge to it like cinder blocks and bricks. These gloves are great at protecting you from yourself and allow you to not worry so much when handling items that might be questionable. If you do any kind of work with sheet metal these are the gloves for you. I have had sheet metal cut my thumb to the bone so quickly I didn’t even have time to respond before the area looked like a crime scene. These gloves would have protected me from that for sure. I can see where electricians would love these gloves also because of constantly pulling wires and having to work around pointy and sharp objects. If you work at a construction site these would be a great glove to use because you would be able to handle multiple items without having to switch from one type of glove to another for different levels of protection or grip. Since these gloves are so grippy and offer such great cut and puncture resistance you are pretty much covered no matter what you are doing. There is one negative with these gloves and that is they seem to run tighter/smaller than normal. If you usually wear a size medium you may want to try going one size up. I had multiple people try these gloves on and they all said the exact same thing. Other than that, these gloves are fantastic, and you can tell Milwaukee did their research when designing these gloves.

I work in an industrial setting and I’m always on the lookout for the next great product to help stay safer, warmer, comfortable, etc.… These Milwaukee latex cut 1 resistant winter work gloves are just about perfect. Your hands stay nice and warm on the inside and dry on the outside with the double dipped latex coating on the front of the gloves and the inner terry liner to keep your hands warm on the inside. Since these gloves are only coated on the front of them it allows your hands to breathe so they don’t come out looking like a prune when you remove them. These gloves have great dexterity and allow you to comfortably pick up the smallest of items with ease. The double dipped sandy latex mircofinish really helps with gripping everything you touch. I have to open/close a lot of valves and these really enhance the grip factor. If you spend your days picking up nails, nuts, bolts, etc.…. you will love these gloves for their dexterity. If you work in any form of construction these gloves would be great for picking up debris or carrying anything with a rough surface or edge on it like cinder blocks or bricks. I let several of my co-workers try these gloves on and everyone who tried them loved them. They couldn’t believe how warm and comfortable they were. Our work supplies an all leather glove for opening/closing valves and carrying supplies. The problem with an all leather glove in our setting is that when they get wet, they are slippery and just about useless and when they dry out, they get all deformed and shriveled up and are no longer comfortable to wear. You don’t have any of that with these Milwaukee gloves. Your hands stay much warmer and when wet they still have plenty of grip on the face of them. Milwaukee states that these gloves are meant for material handling, general purpose and remodeling applications but I would feel safe to add industrial to that list also. These are a great glove and far superior to the other gloves I have been using. There is one slight negative to these gloves and that is that the sizing appears to be wrong. I usually wear a size large glove, but these are quite a bit tighter than any other size large glove I have worn. I can wear them comfortably, but they are tighter then normal around the webbing between my fingers. If you order these, I would probably go a size larger then normal to make sure they are comfortable. I had several co-workers try these on as stated above and they all said the exact same thing, so I know I’m not alone in this. Milwaukee may want to look into this a little further to make sure their sizing is right.

Theses are heavy duty warm gloves that keep my hands warm in 20 degrees weather when I am working outside. It feel like fleece inside and the exterior is like a hard rubber and are cut resistant. You get a great grip with these gloves and we use them for tripping roses and blackberries. I wear these gloves almost all day long to keep my hands warm during the winter months in northern California.

Milwaukee Tools and The Home Depot offer a bag of a dozen pair of work gloves ! These red and black, easy to find, are good and warm with an Acrylic Terrycloth liner ! The body is 15 gauge Nylon for stretch, flexibility and dexterity ! The black Latex coating on the fingers and palm make it easy to pick up the fastener that you dropped ! The Acrylic liner allows for breathing and insulating your hands. Sold by the dozen so you won't run out when you most need a good warm pair of gloves !!

These gloves are made well enough that they should last a very long time, but it's nice to have extra gloves in case I don't know where one went (that happens a lot in my house) They fit me very nicely, a bit snug for my husband, but he likes them very much. The inside of these gloves is also nice and soft, the cuff feels good against skin, and the rubbery exterior helps maintain a good grip! Milwaukee makes some great stuff!

PADDED; WARM; STRONG GRIP; FLEXIBLE — The Milwaukee Medium Red Latex Dipped Cut 1 Resistant Winter Work Gloves (12-Pack), Adult Unisex are outstanding in many ways for outside work in the winter. The padding on the gloves makes them comfortable when handling rough objects but it does not compromise their flexibility. They are the best gloves that I have found for warmth and flexibility when working in cold weather. I like the ½ double-dipped latex palm micro finish material on the palms which allows a strong grip. Initially, they are tight but loosen some after use. They do not work with electronics. I haven’t yet mastered the ability to pick up screws with these gloves on because the fingers in the gloves are longer than mine. I have enjoyed using these gloves when working with masonry and when cutting and chopping wood. The gloves are made in China.

Thick double coverage of rubbery substance over even the back of fingers and hand. Warm liner that, because of "rubber" coverage, keeps hands warm as there is no way to easily disperse radiant heat from hand.

These gloves are absolutely fantastic. I'm a safety engineer, and I always look for better products for my employees. We are switching over to these for our maintenance employees not only because the feel great when on, but the dexterity is simply awesome. Most of our mechanics have trouble holding on to smaller objects like bolts, but the texture on the palms and fingers grab hold of the object tightly, and really allow you to work with the tools easily. Now these are a bit thicker than you basic cut 1 gloves, but that's because the inner part of the glove is made to protect your hands from the cold. They do a great job trapping in the heat, and also help keep the water out as the front of the glove is basically water proof because of the coating. They are extremely comfortable, have great dexterity and keep you hand warm. Not to mention they do a great job protecting your hands from lacerations/cuts. Not to mention the are ANSI stamped, so what else can you ask for. Definitely recommend!

They are comfortable and very useful when handling liquids that you don't want on your hands.

These gloves are super warm. They have great grip and I love the cuffs. I am in and out of a freezer all day and they are perfect

My normal winter glove size is medium, but these were very tight and made it difficult to move my fingers in. If you are going to buy them, get one size larger than you think. They were also not warm at all. Maybe for cold days in Texas, but not up north.

Tough and insulated work gloves.

My dryer did not get delivered because it was broken, they mentioned a screw in the back was broken. They took it away. Very not acceptable.

The gloves are exceptional fit and keeps hands warm.