Customer Reviews for Milwaukee X-Large Red Nitrile Level 1 Cut Resistant Dipped Work Gloves

High Quality! I have purchased hundreds of pairs of this type of glove. I typically buy. in multi-pack because I use them to garden, pull weeds, and just about anything else. This batch is the most well made I have ever owned. The elastic wrist keeps dirt and sticks out while I'm working and the poly coating on this batch is nice and thick - which helps keep the mud out while planting. I suspect these will be long lasting too. If there was anything I didn't like it is probably that the fingers are a little too long for my short stubby fingers but can I really blame that on Milwaukee?

The Milwaukee Large High-Visibility Cut Level 2 Polyurethane Dipped Gloves are designed to have a Better Fit and Better Protection than the previous glove model. The hi-vis cut resistant gloves have a reinforced nitrile coating between the thumb and index finger is great which will better protect your hands. These gloves have the SMARTSWIPE touchscreen compatible fingertips which is helpful when you have to answer your smart phone or use an electronic device when you are in the middle of a project. I do a lot of outdoor gardening and projects that require me to use gloves for protection and these gloves fit much better along with much better protection and flexibility.

This review is for Milwaukee XX-Large High Visibility Level 3 Cut Resistant Polyurethane Dipped Work Gloves, Kids Unisex, Yellow. I love these gloves they are very light weight and very flexible and the fingertips are “smartswipe” touch screen compatible which allows you to use touchscreen electronics without having to remove your gloves. This can come in very handy on a job site if you must do a quick look up on something for your project. They do offer great protection for your hands even though they are lightweight. These gloves have an ANSI cut rating of A3 which according to ANSI information on the web is as follows: “ANSI – A3 are proven performers for light and medium cut hazards, material handling where sharp edges present risks, the pulp and paper industry and general construction work”. They also make very good gardening gloves if you have sharp prickly plants. This I know for a fact because I live in Arizona and have cactus and other plants with thorns and have used these gloves without and problems. These gloves are definitely another fine product from Milwaukee.

These gloves are great when working with metal, or other sharp objects. They are soft on the inside for a comfortable feel, but tough on the outside to keep your hands protected when dealing with sharp materials, or when cutting with razor blades or utility knives. We also use these when working in the woods as it protects your hands from thorn bushes and rose plants. They also work great when moving bricks or cement blocks, as they are tough enough to withstand the rugged sides of many things, but not too thick where you can't grip things.

These Milwaukee XX-Large High Visibility Level 4 Cut Resistant Polyurethane Dipped Work Gloves are a valued addition to my tool box and yard tools. They are lightweight and highly flexible giving you the tactile response necessary to working with small parts. They provide excellent grip with a high level of comfort. Excellent for use while using a chainsaw providing a level of cut resistance necessary when working with logs and limbs. The bright color aids in visibility when guiding and directing heavy equipment movements

These Milwaukee Resistant Polyurethane Dipped Work Gloves are Excellent. I wear these gloves almost everyday. I am retired and I do a lot of indoor and outdoor work around the house. I really like the reinforced coating between the thumb and index finger. The best thing about these gloves is how durable they are. They save your hands from wear and tear.

I use these gloves for all types of jobs so I needed to make sure that they were going to work perfectly. I also needed to know that they were durable. Man these gloves are awesome. A little snug for my hand but I like that the best when it comes to having to use heavy equipment etc. Since the gloves are pretty great, I'm sure it will take a while before I need to buy some more.

The gloves can be used for multiple projects. They are unisex so I got Medium because I wanted to ensure I can use them in different way. They fit me and my handy man so they stretch to fit individuals. You can use them with water, dirt or even to move things (broken wood, etc.). The material molds your hands so it's not even like your wearing gloves, you have full movement of your hands and your free to do all projects with ease...

I have used quite a few different gloves to protect my hands when working in the yard or handling rough lumber and as far as I am concerned these are the top knotch gloves made for that purpose. They keep my hands warm when it's cold outside and the extended cuff keeps the cuffs from falling down or not quiet covering the wrist. They are very comfortable and keep your hands protected. I highly recommend these to any DIY'er and to people who work construction that need a glove that will let you feel what you are doing without being bulky, These are really good gloves.

Fantastic set of gloves with the quality you would expect from Milwaukee. I do a lot of work on cars and woodworking at home and needed some quality gloves that will protect my hands and will last. After working with these gloves for a couple of weeks I was very impressed with the quality and comfort! Only a few days in I was tearing apart a bumper on a car when a plastic piece broke off in my hands. These pieces can be sharp and had I not been wearing these gloves I likely would have sliced my hand open. Big thank you to Milwaukee for producing this set of gloves and protecting my hands Pros: -High quality -Heavy cut resistance -Great grip -Breathable Cons -Smartswipe did not work on touchscreens very well. I had to remove my gloves a couple of times to type

Love these gloves. The gloves are light weight and very flexible.The palm / finger tips have a reinforced coating to protect your hands and extend the life of the gloves. The gloves are thin yet strong enough to hold up. This makes it so much more comfortable and allows you to get a good grip when working on projects. I like the bright color which makes it easy to find your gloves. High quality and should last a long time.

High visibility, comfortable gloves with a very nice grip . These gloves can take a beating in all types of weather, I found even when I got them wet the grip never failed, I like the design because the gloves are breathable and will not create excessive moisture buildup, the gloves are very flexible with a nice tension on the wrist area . It’s always a great idea to leave a pair in your vehicle.

PROTECTS HANDS when METALWORKING and GARDENING — The Milwaukee High Visibility Level 3 Cut Resistant Plyurethane Dipped Work Gloves worked exceptionally well when cutting metal flashing and metal window trim. I never felt a sharp edge or received a cut. The gloves are somewhat stiff initially but they fit well and flex quickly. With the gloves on my hand, I was able to navigate my smartphone and tablet with no difficulty. The backs of the gloves are a fluorescent green and not yellow as stated in some descriptions if that would make a difference. The palms of the gloves also protect the hands when carefully used with prickly plants that such as rose bushes and some hollies.

Milwaukee XX-Large High Visibility Polyurethane Dipped Work Gloves: everything about these work gloves is true about being a better fitting and better protection. They are very breathable because of the fabric on the back side of the hand. The rubber is good enough for a lot of household chores. The rubber in the palm, though, is not puncture proof, like picking up pointed rose bush clippings. You’ll feel it. Good enough for painting projects or working on car repairs. Not good for dipping into chemicals. They go on easily enough and especially when they are XX-large. The yellow is very noticeable – really stands out. Very much, you can re-use these many times. I have yet to try these on a touch screen, I just don’t any tools or instruments to try it on. Again, I do like the light touch of these gloves, can re-use it many times.

These work gloves are breathable, snug yet comfortable, very light with no bulk, but the polyurethane dipped protection gives you some ease of mind knowing you have solid puncture and cut protection. The touchscreen compatible fingertips are a welcome upgrade over my previous work gloves, as having to peel off your gloves every time you need to answer a message was getting quite bothersome. Tough, high quality, excellent.

I use these cut gloves for both work and at home when working on projects. I find they offer better dexterity and protection than other gloves. And I know they can be expensive. I compared the Milwaukee cut gloves to the ones I had bought in the past, and I feel they are a much better glove. They both are Level 4, which is 1 level below the highest rating for cut resistance. So these are some protective gloves. But these Milwaukee gloves are rated much higher on the European scale that the ones I compared them too. Plus they have a double reinforced thumb area for better protection. The nylon stretches and holds on your hand tightly so they don't slip off. The high visibility is a bonus for when you are working with someone. They always know where your hands are. It's hard to miss these gloves. After a few days of use, I did notice some wear of the polyurethane in the palm and finger area. But they are still a sturdy cut glove for protection.

If you are needing a great pair of work gloves, you have found them. These Milwaukee XX-Large gloves fit true to size. The bright yellow provides high visibility whether you’re directly machinery or happen to drop a glove. These are 11”, provide a level 2 cut resistance and the polyurethane dipped gloves provides for a good grip of garden tools, hand tools or debris.

Milwaukee X-Large Gray Nitrile Dipped Cut 5 Resistant Work Gloves (12-Pack), Adult Unisex sized. These are the most comfortable and flexible dip coated glove I have ever worn. They have a protective dip coated front and fingers and a form fitting flexible back and sides. The front material is also touch screen compatible so you can use your devices without removing the gloves a real plus in cold climates. Only note I would make is to order one size up from what you normally ware. They are very form fitting.

Heavy duty and well constructed. Knit fabric is much thicker than other brands. Provides an extra measure of safety and cut resistance. The nitrile coating has great grip extra wear patch between thumb and finger. The downside is in cold weather use, the coating becomes less flexible and retains the cold. My experience in 25-30 degrees temps. Warmer temps yes the gloves perform much better and are fairly breathable as well.

These gloves are pretty nice. St first I did not like the fact that they were too tight for me, but after wearing them for a while they seemed to stretch out or I just got used to them. They are however not breathable in my case. When I first got them the weather was still fairly warm here and could not wear them for very long without getting sweaty hands. i have now been wearing them outside in the colder weather, like this morning it was 29 degrees here and I felt good in them working outdoors. I took a few pics for you to see. I know the gloves say yellow in color but for me they looked mostly green and only appeared yellow in some lighting and not all. Don't know if that matters to anyone, it doesn't for me but that's just an observation. They have very good gripping quality so that is a big plus for me. When you grab a hold of something you know it won't slip and that is the best feature of these. So yes i would recommend them to others. Just keep in mind if you have giant paws they will seem tight at first and will take some getting used too.

These gloves are perfect for working safely on projects around the house. Truthfully, we love the bright green color because they are easy to find. They have a good grip and the tech finger tips work perfectly. I got the XXL size. I am 6’6” and have a hard time finding gloves that fit well but I found these to fit comfortably. The only slight negative is that they aren’t very warm. My hands were cold using them outside this winter but since this is not their purpose I don’t think it detracts from their quality.

These cut resistant gloves are light weight but also durable. I have been using bulky thick gloves and it makes it difficult to grasp small items. These gloves are thin enough to allow you to grab small parts yet being cut resistant makes it less likely that you will injure your hands. I cant count how many times I have cut my hands on sharp car parts. These will be well appreciated.

These cut resistant gloves are light weight but also durable. I have been using bulky thick gloves and it makes it difficult to grasp small items. These gloves are thin enough to allow you to grab small parts yet being cut resistant makes it less likely that you will injure your hands. I cant count how many times I have cut my hands on sharp car parts. These will be well appreciated.

The Milwaukee work gloves are an excellent glove. These are A2 level cut proof which is decent for most work jobs. The fit is comfortable for a XL size but larger hands that would be best suited in a XXL size. the bright color is a nice plus as well for visibility purposes. The polyurethane coated palms are well made. Unlike less expensive options these are a better option. The thumb area has a great extra patch that helps in wear in this area that most cheaper gloves rip. These also work with smart phone screens as well. A convent 12 pack is a nice option.

I received the Milwaukee X-Large High Visibility Cut Level 3 Polyurethane Dipped Work Gloves, Kids Unisex, Yellow. These gloves are excellent. It saids for kids but fits my hand very well. The ability to pick up small objects is great and easy. They give you good protection and comfortable doing it. I would differently recommend these to any one who has to deal with messy thing.

Although these gloves are probably more aimed at handling sheet metal, I used them to handle lumber. I don’t think I exposed myself to any cut hazards, but I didn’t get any splinters! The yellow gloves make it easy to find them, even in low light conditions. The nitrile coating has a nice grippy touch. It’s also touchscreen compatible. Be careful that the glove fingers are fairly clean so you don’t scratch your screen. The nitrile coating appears to be durable, however it’s a little bulky between fingers. I got used to quickly, though.

These gloves have a reinforced nitrile coating, on thumb and forefinger, the high wear points. They have a waterproof, gritty palm and inside fingers for gripping a tool, a piece of metal or glass. They are light and breathable on the sides, on the back, and on the cuff. They are rated ANSI (American National Standards Institute) Cut level 4, which means they provide safety for handling glass and sheet metal, for automotive and construction work. They have a stretch cuff and a stretch back for a snug fit. Their Day-Glo yellow is visible for finding in a drawer, on a bench or on a garage or shop floor. They have a polyester inside that’s slips on and off easily. They have touch screen-compatible fingertips. They have been dipped in polyurethane for cut protection. They fit well, and they are available in five sizes from Small to XX Large. These are comfortable, functional, well-fitting and protective gloves.

These are some of the coolest gloves to work in and they offer some of the best protection out there. These have the ANSI cut level of A3. I use these for just about everything now, from yard work, like moving brush, to sharpening my tools, especially my saw chains, to on the job. The next time you work on the car, put these on first and see how much better it is, from the grip to no cuts or scratches. They’re thin enough so they don’t restrict your movements. The amount of dexterity is unbelievable with the amount of protection you get. The bright color adds to the level of visibility on the job site and that’s always a plus. These have a reinforced nitrile coating that makes picking up small items easier and adds to your grip, plus you can use your smartphone without having to take them off. These come up on your wrist a little further than some glove, that offer just that little bit more of protection. We wear these pretty much anytime we’re working, because there’s always the risk of a cut and these are so comfortable and cool, you don’t have to take them off as much as some gloves.

These High-Visibility Cut Level 3 Polyurethane Dipped Gloves by Milwaukee are a perfect fit for me. They seem to fit better and give me the flex that I need as well as the protection. I do like the hi-vis color with the cut resistant material. The reinforced nitrile coating between the thumb and index finger give a surprising amount of toughness. But for the techy DIY folks out there these gloves have SMARTSWIPE material for touchscreen compatible fingertips. The gloves offer really good dexterity when handling small objects and are lightweight and breathable to wear. Another great product by Milwaukee.

They fit like a glove! And so they should they are snug fitting allowing my grip to be much stronger than it was before they’re very bright in color so if I’m working outdoors I’m at high visibility.Wearing safety gloves is very important when working outside or inside, whether I’m using a drill ,a saw, hammering nails. They have great ventilation to keep the heat or cold in or out, and the rubberized portion is water resistant.