Customer Reviews for Pfister Ladera 18 in. Towel Bar in Spot Defense Brushed Nickel

This is a nice looking towel bar. I wish the mounting plate used a spring instead of the tiny hex screw to hold it in place. The tiny hex wrench was so difficult to use to tighten the hex screw. But, once I had it done, it looked great in my bathroom.

I really like the design and clean look of this towel bar. It comes with all the hardware needed for install, including drywall anchors, screws, & support brackets. It even has a handy template to save you from having to measure the distance between screws. The drywall anchors are pretty junky, however, there’s a tool to help you punch out the drywall tabs for added support. I would still recommend using more sturdy drywall anchors if you have them handy. The way the towel bar is designed would hypothetically allow you to adjust the size to anything smaller than the original size. The finish is nice, resists fingerprints and its very lightweight. I recommend it if you’re looking for a nice modern towel bar to update your bathroom!

I love the design of this bath towel holder. Very simple and not too big as the bathroom is not very large. Classic satin nickel design goes with everything in the bathroom. Once our bathroom is remodeled in the next coming week or two, we are installing this, along with the matching hand towel ring and toilet paper holder. Can’t wait to see the finished product.

This review is on the Pfister Ladera 18-inch Towel Bar in Spot Defense Brushed Nickel. The Ladera series bath line is putting out a lot of affordable and excellent quality products. This Towel bar is made from premium metal and is great looking. It’s sleek design and brushed nickel (my favorite) finish matches the rest of my bathroom fixtures. The install is a breeze with its instruction sheet and diagram that you literally tape to the wall and mark your holes (it’s so easy that its basically impossible to go wrong). Limited warranty - Great price – Thumbs up

This towel rack was simple to install and looks great! The template was easy to tape to the wall and drill the pilot holes. Screwed in the mounting hardware, and popped the towel rod on. Only took about 20 minutes including getting all my tools out! One heads up - make sure you have the template perfectly level -there’s no wiggle room to shift or readjust the mounting hardware once it’s up there. The template was very well marked so I didn’t have any problems, but definitely take your time to check with your level, and make sure you have it taped to the wall well. The little hex screws to attach the rod were secured with only a few twists of the included hex wrench so that was nice! I bought some S hooks to attach to the rod, as my goal was to replace the random assortment of nails and hooks I had holding up all the cleaning tools in my laundry room with a more organized, attractive solution. Added my hooks, hung my supplies, and presto! Nice upgrade, and I love the simple, clean look and feel.

This is a very well made 18 inch towel bar from Pfister. It is made with Pfister’s “Spot Defense” stainless steel. It has a round bar, die cast end brackets that looks very rich, classy, and stylish. The round towel bar tube is made of nice thick stainless steel tubing that looks like it would stand up to a child pulling a towel off without it bending. The two end mounts are a nice heavy die casting, not a thin stamped sheet metal. The towel bar’s end brackets slides into the towel bar’s tube. Pfister’s “Spot Defense” stainless finish helps keep your towel bar looking clean and like new by helping prevent water spotting and fingerprints. There is a drilling template provided, but the holes aligned up perfectly with my original screw holes so I didn’t have to do any drilling. Always make sure there are no pipes or electrical wiring behind the wall in the area you going to drill. The box contains the 4 mounting screws, 4 plastic drywall mollies, and a 2mm Allen wrench to tighten the set screws (See Photo). Yes, the set screws are metric, so hang onto that Allen wrench if you don’t already have a set of metric Allen wrenches. Pfister has a complete line of matching products in their Ladera collection. Including toilet paper holder, robe hook, towel ring, and even matching Ladera bathroom faucets for sink, tub, and shower. Pfister even has matching Ladera faucets for kitchen and bars.

The Pfister Ladera 18 in. Towel Bar in Spot Defense Brushed Nickel fits perfectly above my master bath toilet. The Pfister Ladera collection is modern and gives my bathroom the classy upgrade that it needed. The towel bar installed without a hassle. The instructions were simple and easy to follow. Pfister is a great brand and has never let me down.

I acquired this towel bar in two different lengths with the intention of having flexibility depending on how the design of my bathroom would turn out. Seems to be made of quality materials. The finish itself is designed to avoid spots from showing and pitting the bar itself. How well this works only time will tell. Instructions are clear and installation should be relatively easy.

This product is good for anyone who is looking to update the look and feel in their bathroom or even by the washer to hang things to dry. The spot defense is nice so that fingerprints and water spots will not show onto this product very well is a nice surprise and bonus feature not expected. this product comes in a couple of different colors to compliment your bathroom finishing's.

This is an 18 inch high quality towel bar! Looks great in my bathroom and now we are able to have a towel on our rack that can dry easier.! We also have a matching sink faucet so the colors look uniform. The spot defense is great so you don't have to keep wiping it dry. You can also use it to hang clothes to dry also if you wish. It is also great to hang all sorts of things that you need to dry! The Brushed Nickel color on mine is very rich looking! It really looks nice and modern, yet contemporary! Install was a breeze. They provide you a stencil on the instructions booklet to make sure you have proper distance between the holes. Installation is easy but you need to be careful since it is in three pieces. You want to make sure the bar stays in between the two end caps.

The Pfister Ladera 18 inch Towel Bar comes in Spot Defense Brushed Nickel, which is much like a satin stainless-steel color. It comes with the mounting hardware and wall anchors to mount it to the wall. A full set of mounting instructions are provided. This towel bar has an overall length of 20 1/4 inches from the outer edges of the item, and the bar is 15 5/8 inches long. The brushed nickel is a very nice color so that it fits with most décor. The unit is very solid but can not be used as a grab bar. It is a very nice design that will fit well with most decors.

I ordered multiple towel racks and two toilet paper holders in the Pfister Ladera Brushed Nickel to match existing bathroom faucets I had in the same pattern. I was very pleased with the quick delivery, good packaging, high quality and great looking products. I would highly recommend the Ladera products.

it matches other Ladera theme bathroom fixture.

The bar is nice and easy to install, but the template is off in my opinion (the holes were 2mm or 1/8in too far apart). I had to drill new holes to get the best result (tight fit).

The towel bars and TP holder I bought have a sleek, modern design that go well with the faucet handles that were already in the bathroom.

Looks great. Easy to install. Exactly what we needed in a laundry room to match the faucet contour.

Sturdy. Easy install

Beutiful towel bar. Very sturdy

It looks very nice and was easy to install.