Customer Reviews for Rust-Oleum 1 gal. Cleaner and Degreaser

Thank you for reaching out, Joe! Rust-Oleum Concrete Cleaner and Degreaser is designed for general cleaning and to help degrease the surface. Older, more tough stains may require a second application.
- Rust-Oleum Product Support 3

We appreciate your feedback! Rust-Oleum Concrete Cleaner and Degreaser is intended for degreasing and general cleaning purposes. Heavier, more stubborn stains may need a second application. The product may also need to be used at full strength for heavier stains. We also recommend wiping up any excess oil and grease spills. Make sure to sweep the surface to remove dirt and loose contaminants as well.
- Rust-Oleum Product Support 3

Reapplication of the Rust-Oleum Cleaner & Degreaser may be necessary for extremely dirty, stained, or hard to remove stained surfaces. We recommend that you if you do decide to reapply the product, that you dilute it to a 10:1 mixing ration and to test it in an inconspicuous area prior to application over the entire floor. - Rust-Oleum Product Support 1

Thanks for sharing your experience with Rust-Oleum Rust-Oleum Cleaner & Degreaser. If you have any further questions or concerns, we are here to help. 800-481-4785

Oh no, this is not what we like to hear! Rust-Oleum Cleaner & Degreaser For Concrete is formulated to breakdown oil, grease, stains, tire marks, dirt, harmful silicates and more to properly clean and prepare surfaces for coatings, paint, stains and sealers. After applying the diluted solution to the surface allow to soak in for at least 20 minutes, then work the surface with a stiff bristle broom. For removal of tough grease and oil stains, Rust-Oleum Heavy-Duty Degreaser is recommended.
https://www.homedepot.com/p/Rust-Oleum-EpoxyShield-1-qt-Cleaner-Heavy-Duty-Degreaser-6-Pack-214382/203423889
- Rust-Oleum Product Support 6

Let's see what we can figure out. Rust-Oleum Cleaner & Degreaser For Concrete is formulated to break down oil, grease, stains, tire marks, dirt, harmful silicates and more to properly clean and prepare surfaces for coatings, paint, stains and sealers. Pour diluted mixture of Rust-Oleum Cleaner & Degreaser onto the entire floor. Allow to soak into the surface for 20 minutes. Mist the surface as needed to keep it damp. Work into the surface with a stiff bristle broom. After scrubbing the floor, rinse thoroughly with water or power wash to remove all cleaner residue.
- Rust-Oleum Product Support 6

Thank you for sharing your experience using our Rust-Oleum Cleaner and Degreaser. - Rust-Oleum Product Support 2