Customer Reviews for Rust-Oleum Stops Rust 12 oz. Hammered Light Blue Protective Spray Paint (6-Pack)

Are use the product to spray paint the hardware on an end table that I just finished Resurfacing. It looks exquisite.

Used this product on aging aluminum outdoor furniture, 6 chairs, 2 person bench, and a 3' x6' table. Came out great! Rust oleum products have always worked well for my projects.

Great color and coverage. Painted a wood frame around a mirror and it looks great. Matches brass fixtures around it.

I purchased quite a few cans for refinishing our patio sets, which it did quite nicely. Unfortunately, even after leaving them for up to 7 days for the paint to have time to fully set, when covered to protect from the animals, the paint quickly wore off back down to the bare metal. This happened on the backs of every chair when they were covered and the same thing happened on the edges of the tables where the covers touched. The furniture ended up looking very nice, as long as I don't try to cover it at all.

I used this paint as part of a restoration on my radial arm saw & stand. The paint hardened to a tough and glossy finish, making it easy to wipe free of saw dust, while at the same time protecting the steel from rust. The end result is better than what I could have hoped for, and it now looks better than it did when new! I also used other Rustoleum colors for the handle and other components. (before & after photos included)

I repainted my patio set for outside and it did a fantastic job!

I used this on the hinges of my tack room barn doors, the handle and my swing with metal horses. Love the hammered look of this paint. Went on smoothly and covered well.

Amazing paint. I recommend to buy the paint can grip holder as well, it will make your job easy. Since I did it outside on the yard since I don’t have a close room to paint I think I used like 2 extra cans because of the wind. I also used a wire brush and rust dissolver for preparation before the paint. Wife is happy.

Does exactly what it says it does. Table looks like we bought it yesterday!

i did my York dumbell and it did a great job. i recommend this very highly.

Painted some copper post caps which had turned ugly. Looked better than new after using the Hammered Copper Paint.

This stuff is amazing. It really works great for prop weapons. I used it to paint a 3D printed Shield Boss for a Viking shield made from pallet wood. I have used silver, gray and black.

Great product!! Use it to paint over old rusty wrought ironwork (Tables, Plant Stands, Park Bench hardware.. I prefer the hand-Hammered look.

The paint is hammered grey NOT black and has some gloss to it. I used this paint several years ago and it was true black and matte. The quality of the paint is fine but the color is not black matte.

Works great for my cast aluminum patio furniture. 5 stars if only the nozzle would not be so hard to depress.

Gave my fence a nice finish

I bought it to experiment color and I loved it gives a perfect look of bronze/brown color that looks amazing ♡♡♡

Used this paint bathroom fixtures to better match the upgraded lighting (which is a weathered iron look). Turned out way better than expected. A few coats and resulted in a cheap and simple upgrade!

Does a great job covering up not so great finishes!

Dries fast, covers well.

The paint gives a "hammered" effect and so is sometimes tricky to spray with even effect. Shake often while spraying. Nice finish. Used it on some exterior aluminum window shutters that had been previously painted tan by brush. Gave the house a fresh new look.

Wasted 3 cabs and 4 panels that were 15$ ea due to the cans being inconsistent. Might be ok for small project but is a cheap show for anything with volume. Never again.

Doing a project using three colors of the hammered paint. The Silver worked the best for me. Went on clean, good coverage with just two coat and had a real nice hammered effect. Did not dry as fast as they said it would, but was not real bad.

Doing a treasure box for the grandkids, and wanted the inside to have a nice hammered look, this paint did a real nice job, Drying took a bit longer than the 15 minutes they said it took, but in a couple hours was dry enough to handle and 24 hours was only a little tacky.

I’m doing a project that I wanted the hammered look on, the majority of the outside of the box is black and I am making 8 of them. So this is being applied to a high quality plywood, ready for finish or paint. First problem I had was the spray head themself are faulty, my fingers alway turned out black. Second, the coverage was poor, as you can see in the picture even after 4 coats, you can still easily see the wood grain. Third was the”hammered” look, I used two other colors of this and they both ended up with the look I wanted, the black almost never came out with the hammered look. About half way through each can it started to spray on drops of paint, I was just lucky it did not effect this project. Forth they say dries in 15 mins, my experience was it was still pretty tacky even after 24 hours. The other hammered look paints I used all did well, for some reason I had problems with every black can I had.

I’ve used this hammered finish many times. This time the spray came out in a mostly vertical pattern making even coverage impossible. I really wanted this finish but I’m forced to cover this with another product. This is a flat white sliding closet door laid flat:

This paint goes on smooth and has amazing color. I only reccomend that rustoleum finds a way to keep the cap from caking. I hate soaking the cap in acetone before or after every use.

Used this paint to coat pole for hanging fan ! Coated in one coat looks great ! Matched fan color !

Applied to lightly sanded vintage metal bar stools, the result was a great looking finish!

I successfully used this product to restore my 28 year old dumbells.