Customer Reviews for TowSmart Class 3 6,000 lb. 2 in. Drop, 3/4 in. Rise, 1 in. Shank X-Mount Reversible Trailer Hitch Ball Mount

The x design is great less changes for this to stick in the vehicle due to rust. Used this 2" trailer hitch a few times with zero issues. The specs listed on this are a 2" drop or a 3/4" rise if flipped the other direction. It's rated for 6000lbs gross trailer weight, and 600 lbs max tongue weight. Although these are the specs for the trailer hitch, every vehicle has a different rating that should be equal or lower than the rating of the hitch. Be sure to verify those numbers to ensure proper towing safety.

I needed a hitch with a 2 inch drop and 1 inch shank, the TowSmart fit the order perfectly. I like the X-design draw bar, less surface to surface to rust and wear, plus the rolled form shape likely make the draw bar stronger. I had to buy a newer 2 inch hitch ball since my older hitch ball didn't have flat sides to nest in the lock rails. Not a big deal, it is better renew the hitch ball with the new hitch. The draw bar set in my receiver just like it should. No trouble setting the hitch pin. No rattles except when I hit the driveway bump. Well made!

I was needing a trailer hitch ball for my utility vehicle to pull trailers on my rural property. This TowSmart X-mounted ball hitch can either be a 2 inch drop hitch or a 3/4 inch riser hitch. I used the riser option. The hitch has a 6,000lb trailer weight and 600lb tongue weight capacity and is considered a class III hitch. The lock rails are designed to help keep the ball from turning while tightening the ball. However, I believe you have to have a different style trailer hitch ball than I have. It fit well in my utility vehicle receiver and appears well made.

Does what it is supposed to do.

This trailer hitch mount seemed to fit a little loose in my receiver, however it seems to be working well.

This was perfect for my needs. I have a lifted Jeep and needed this to tow a small trailer. The "drop" was just what I needed. The trailer is only slightly angled up....which is perfect.

Great Inventory and just what I was looking for.

The 2" drop helped level the trailer being used at the time vs. my 6" drop which I typically used because of the height of the trailers rented.

easy to install and works as designed ,gives me the correct height i was looking for , I use it on my Kawasaki Mule for yard towing .

worked great on 14 ft trailer

Great and usefu tooll

I put this on my golf cart to have just the right amount of rise to pull the grey/black tank and works perfect. And it's just the right size and weight not to sag the floor.

Perfect hitch for 4500lbs. Can handle more though.

Works just like it should.

Welds were terrible. I’m a welding inspector and I wouldn’t trust the weld on this hitch. There was undercut and under fill.