Ball bearing drawer don't fit at all as you can see in the photo also I have to multify the insid...
Ball bearing drawer don't fit at all as you can see in the photo
also I have to multify the inside wood panel. I can't not fix or adjust the front drawer.
Since I made the workbench and I don't know how I can replace the drawer or return for new one.
1 person found this helpful
Jun 11, 2020
I got the workbench for my ceramics to kind of consolidate all my stuff in one area. I'm going to...
I got the workbench for my ceramics to kind of consolidate all my stuff in one area. I'm going to replace the top particle board that it comes with with a piece of birch veneer so I can do my Ceramics directly on top of it and I think it works perfectly... just remember you need to get a bar height stool or chair so you can sit while you work if you don't prefer to stand.
I'm 48 year old female pretty normal mechanically minded I believe... I put it together by myself.
you need a rubber mallet, and I believe it comes with an Allen wrench or grab a set they are cheap...pieces were heavy..thankfully due to its heavy construction but other than that it was pretty simple.
yes there were some places I had to decipher the picture graph but all the pieces were number so other than that it all went well.
The only place I really struggled it was at the drawer. It is heavy and awkward to put together and install by yourself. If you have a second person that is not a problem at all.... if you your dont and you struggle too much with it don't even install it ....I put mine in and honestly I don't put anything in it cuz I have little bins and Cubbies attached the pegboard that make everything easily accessible
**oh pro tip**
It was delivered on my porch I opened it right there and carried the numbered pieces into my house so it was more manageable.. I think this thing probably weight over 70 lb in the box!
And you'll see bits of smashed particle board in the box when you open it....I kind of had a little heart attack for a moment but then realized that particle board was put in there to protect the actual particle board that was part of the actual table tops from getting damaged sigh of relief ;`o
They are very nice, Low price with free shipping. I got 3 of them for my lab in the basement. In ...
They are very nice, Low price with free shipping. I got 3 of them for my lab in the basement. In the last 4 weeks I built the lab in the back of the garage and put them together. The wife was out of town I hope she don't mind.I haven't had a peg board before, I keep hanging tools every day. I have never been so organized before. Been retired for 2 years and I was climbing the walls with nothing to do. Now thanks to your nice benches I can keep busy. Thank you
The workbench package arrived at my door step successfully. However, the package was very heavy ...
The workbench package arrived at my door step successfully. However, the package was very heavy and difficult for one person to wrangle it to my basement (see pic). I wrapped it in rope to have some hand holds to move it.
I opened it in my basement, finding two individually packed cardboard boxes with the steel parts and the dense particle board pieces. All the parts were clearly marked and shown on the single large page instructions. Also, some particle board pieces were marked “scrap” and are evidently extra.
The package had shifted in transit and this took a toll on the instruction sheet, making rips and tares. I was able to close up the tares and follow the instructions. The bench is easily assembled with post into keyhole attachments, and there is an absence of nuts and bolts. The only nuts/bolts were for attaching the backside peg board to the bench and the drawer handle. I used a rubber mallet to make sure the steel member posts were fully seated in their respective keyholes.
Upon completion, I found that a 48-inch LED tube shop light fit perfectly in the top and I found this light would be sorely missed had I not had one handy. As for the pegboard back, there were no hooks included in the package.
Pros: sturdy; nice drawer; some extra "scrap" particle board included
Cons: very heavy package (get a helper to move it), torn instruction sheet; no hooks for the pegboard; you'll need lighting to add
Great product for the price. I purchased 2 units for my garage. Assembly instructions are poor a...
Great product for the price. I purchased 2 units for my garage. Assembly instructions are poor and ambiguous. Takes about an hour to assemble each. Partical board shelves are okay. I will eventually replace with 5/8 plywood. The large drawer is nice to have, but a little flimsy. Strong metal frame, ensure you use a hammer to tap and lock in place.
Overall, a very sturdy bench for the price. The steel is heavier than I expected, honestly. I hav...
Overall, a very sturdy bench for the price. The steel is heavier than I expected, honestly. I have an 8' bench for a vice, grinder and general banging fun. I got this as a tool crib, rather than an expensive roll-away. I'm not a NASCAR pit crew member.
Like many reviews before this, mine came banged up. The box weighs 100 lbs., ensuring rough handling by the shipping chain which the press-board (thick press-board that is responsible for all that weight) can't stand up to. The work surface and bottom shelf are both 2' x 4' . The local Home Depot carries pre-cut plywood in that size. I spent the 20 bucks for a better work surface.
Other issues I came across that may help: A few of the part ID stickers were on the wrong part (mostly the L vs. R for the left and right side got switched a couple times), so pay attention to the instruction drawings which are actually pretty decent. The uprights that hold the pegboard came without the pre-drilled holes. I have a drill and took care of that myself with 4 x 1/4" holes.
This bench completely fills my needs as a tool crib, I just had to work for it.
I have had this work bench for several weeks and it is working out great. It's very sturdy and I ...
I have had this work bench for several weeks and it is working out great. It's very sturdy and I am able to store quite a bit of stuff on it.
I have a bad back and the work area is at a good height for me as I don't have to bend forward much, The pegboard and large drawer
are working out great for storing my frequently used tools. I think this is a very good choice for someone who needs a good sturdy workbench.