No Results Found

Refine by Rating

Customer Images (9)
  • September 19, 2010
  • Recommended Product

After researching several welders, I purchased this welder for my husband as a gift. He LOVES it!! So many outdoor projects have been completed with the help of this welder!! Great product with a great price!! Good for the experienced welder or the beginning welder!!

TheGoodWife

Rapid City, SD
21 out of 21 people found this helpful
more details...
By: TheGoodWife
  • Great welder
  • December 29, 2009
  • Recommended Product

I have been a welder for 20 years. This is a great little welder, it will handle all you home task and lite industrial.It is a very good price and a very good welder, works great with the gassless wire too. I would not hesitate buying another one just like it. It does a superburb job.

drpepper

Louisville,Mississippi
17 out of 17 people found this helpful
more details...
By: drpepper
  • Great Welder + Great Price= Good Sense
  • February 21, 2010
  • Verified Purchase & Recommended Product

After doing a bit of research we found that this was the best for the average do it yourselfer. It's a great package for the occassional welder. Looking forward to getting many past due jobs done. I feel that I am going to get great performance with this Lincoln Welder. Have a Lincoln stick welder for years and it works great still. I would suggest this welder to anyone that is need a good dependable welder at a great price. Happy Welding!!!

  • DIY

SanChes

Millers Creek, NC
10 out of 10 people found this helpful
more details...
By: SanChes
  • Great little welder
  • July 05, 2010
  • Recommended Product

I have been welding for ten years and have owned many welders. This one performs well right out of the box, easy to set up and makes a good clean weld.

joecontractor

CO
10 out of 10 people found this helpful
more details...
By: joecontractor
  • Great Welder
  • July 10, 2010
  • Verified Purchase & Recommended Product

Works great, easy to use. Since I purchased it I've made a 7x14 trailer with it and have had no problems. Makes welding 1/4" steel together easy,

LawnGuy26

Milan, MI
9 out of 9 people found this helpful
more details...
By: LawnGuy26
  • Great Welder
  • October 03, 2015
  • Recommended Product

I by no means am an expereinced welder, But I can popcorn weld with the best of them. This welder is very easy to use and get a good penitrating weld. I have been using the flux core wire to avoid buying the argon bottle and it is still very easy and fun to use. I would recommend this welder to anyone that needs a good welder for there shop. I don't know if this would hold up to everyday welding but great for the part-time guy. It is easy to adjust for different applications with the wire spped nob (how fast it feeds your welding wire) and the amps(the amount of power its using to make the weld) Ihave chamged the wire and that is a bit tricky but still can be done by anyone that can readthe directions. It hold up to a 10lb roll which last nme quite a while.

Pros Durable, Easy to Use, Looks Great, Good Size & Weight
  • Pro

Chris

Norton Vermont
25 to 34, Male
9 out of 9 people found this helpful
more details...
By: Chris
  • Best MIG in your home garage
  • October 18, 2015
  • Recommended Product

I'm a welder my self and I'm surprised to see this welding machine function the way I weld at my shop. I bought this to build my Honda ruckus. I bought the 75/25 gas mixture hooked it up and went on to welding. There's different settings to get the perfect weld. I set it up at 3 C AND GAS AT 10. All around best setting for any thickness. Just remember to have the ground on negative and whip on positive.

OHYEAAHAJ

8 out of 8 people found this helpful
more details...
By: OHYEAAHAJ
  • Great hobbyist machine
  • May 14, 2016
  • Recommended Product

I picked up one of these machines about 8 months ago and love it. I also have a miller 140 at work I use quite often which is basically the same machine as this but for 110v only. My lincoln welds much, MUCH nicer than the Miller does at comparable settings (obviously it can do a little thicker but at same setting with same wire it's much better) I call it a hobbyist machine because even though it is worthy of being in my heavy equipment repair shop, it really is only good for up to 1/2" (it says 5/8" but that's too much for this little guy, and yes it's too much for my miller but I mainly use it for small repairs, I fabricate heavily with my red machine at home) and only carries a 60% duty cycle when running real hot. It is near 100% for smaller stuff. If you plan on welding mostly thin guage metal I would buy the smaller machine though as this one is a bit hot on lowest settings for stuff such as Auto body repair. Also, it comes with a 3 year warranty so make sure you register it. Parts such as liners, tips, and nozzles are also widely available from many different manufacturers. You will also need a 230v plug, and I highly recommend a dedicated circuit just for the machine. If those things don't matter to you then I would definitely recommend this machine also, get a gas bottle. It will run flux-cored just fine but excels with the hard wire MIG. Only thing I dislike is the voltage selector, if I bought it again I would get the 180c which has infinite settings (Google that if you don'tunderstand) all in all this is one of the nicest compact welders available for the price. And if you're reading this and saying "well I can go to Frarbor Height or fleabay and buy same size machine for 1/4 the price", DO YOUR RESEARCH on them and READ about cheap and knock-off machines exploding and lighting on fire, in turn burning down your garage or shed! Spend the money once, I can and will assure you you won't be disappointed

Rattling12v

8 out of 8 people found this helpful
more details...
By: Rattling12v
  • This is one great little welding machine
  • April 29, 2013
  • Recommended Product

I've been a welder/fabrication mechanic for over 25 years,and have used quite a few welding machines,and this machine is ,for the price,the best machine out there. I bought this one to replace the Lincoln 175 hd,that I bought,brand new,7 years ago. That one still works,but i wanted to do aluminum,so i needed more heat. This truly is one great little machine.

Pros Durable, Easy to Use, Sturdy, High Quality, Looks Great, Good Size & Weight, Nice Design, great price

watsey1970

central jersey
35 to 44, Male
6 out of 6 people found this helpful
more details...
By: watsey1970
  • Works very well
  • February 28, 2012
  • Verified Purchase & Recommended Product

The welder took some getting use to but after a few test welds I was able to adjust it so everything works great now.

  • DIY

Rich

Oregon
65 or over, Male
5 out of 5 people found this helpful
more details...
By: Rich