The issue I seem to cannot get past is when you are working in a bright room and the paint will try a different rates obviously but the streaks like you could see the reflection of the light where the streaks don’t match upb. The issue I seem to cannot get past is when you are working in a bright room and the paint will dry at different rates obviously but the streaks like you could see the reflection of the light where the streaks don’t match up. Besides that it’s a great roller holes paint for a while and has a smooth finish.... as long as you paint the entire wall at once with one roller and then the second coat with the second roller. I remodel homes as well as currently remodeling mine.
Wooster paint hardware is my preferred brand. Recently and over the last 2 years I have performed...
Wooster paint hardware is my preferred brand.
Recently and over the last 2 years I have performed may projects at my home and for others (friends and family mostly) when painting I have used many different paint hardware products and Wooster has become my favorite brand and 1st choice. I have not used the 4” roller yet and I wanted to see how it performed. The roller cover was made very well, I do prefer the plastic roller casement the mat is affixed too, as it slides on/off The roller a liot easier Than the cheaper cardboard tubes. I like how it fits, the quality of the product is very good.
If you like to dip your roller in the paint every 10 inches on your wall this is the roller cover...
If you like to dip your roller in the paint every 10 inches on your wall this is the roller cover for you. To be honest, I'd rather have a roller that shed as long as it held some paint. I have been painting for 35 years and this is by far the worst roller cover I've ever used. So. I'll repeat. If you want extra work, buy this crap
Response from WoosterBrushJun 18, 2020
We hate to hear you weren't happy with the Wooster Pro Woven roller cover. This cover will provide a smooth fine finish. If looking for the highest production possible, we might suggest one of our high production knit covers like the Wooster Super/Fab or Wooster Pro Surpass. These covers will both pick up and release a large volume of paint and cover a large area. While they will provide a smooth finish, it is not as fine as the finish provided by the Wooster Pro Woven. Please feel free to contact Wooster Customer Service at 800-392-7246. We would be happy to help you choose the perfect applicator for your project and painting preferences.
Jun 9, 2020
To be honest, I was expecting a 4 inch mini roller cover but it was actually a standard 4 inch roller cover. I hadn’t used one of these for probably 30 years but decided to use this roller cover instead of a mini roller to paint three six panel interior doors to try it out. The roller cover tested was the Wooster Pro 4 inch with ½ inch nap. (Yes I know that you would normally use a ¼ or 3/8 inch nap for a lightly wood textured door.) The roller cover was somewhat difficult to load with a latex primer from a paint tray. The roller cover tended to not roll easily but slid more on a metal paint tray (probably because of the 1/2 inch nap). However, the Wooster Pro 4 inch roller cover did hold paint well and released it well on the surface. One of my favorite features of the Wooster Pro 4 inch roller cover material was that it did not leave any fuzz on the paint surface. It also did not splatter any little paint droplets like some roller covers do, especially those with the thicker nap. This Wooster Pro 4 inch roller cover did leave some bumps on the painted surface that looked like unpopped air bubbles (see photo). On the first door I used a brush to initially paint around the raised panels but decided to use the roller for the other two doors. Surprisingly due to the size and amount of paint that the Wooster Pro 4 inch roller cover held it worked very well on the raised panel area of the door. I slid the roller is the recessed area first to deposit paint and then rolled it out. I also used this roller cover to prime a small area ( 2ft x 3 ft) of patched drywall in preparation for painting. It worked very well for that application leaving no cover material in the surface and no splatter. It produced a very uniform finish. I would definitely recommend this Wooster Pro 4 inch roller cover if you have a need for a 4 inch standard roller cover. I would definitely try the 9 inch version next time I paint a room.
Very pleased with this high quality roller. Material is soft & holds quite a bit of paint but do...
Very pleased with this high quality roller. Material is soft & holds quite a bit of paint but does not leave fuzz or strings. Plushness allows one to easily fill in small groves. I painted some older paneling in our spare room . I went vertical for my first swipe, then horizontally once or twice to fill in the small groves and finished with a vertical swipe. Took longer to write the do :) Making a nice straight edge was easy to doe. Sturdy inside plastic cylinder. Paint washed out easily when finished. Only problem I had was my old roller had a slightly smaller insert than what should have been used.
So if you are like me and don't like painting you want to do it right the the first time with a p...
So if you are like me and don't like painting you want to do it right the the first time with a product that is going to do one thing and that is just work and work right.
These rollers high density roller covers from Wooster. Soak up alot of paint. They cover well and they do not leave lint behind in your paint. Do it once . Do it right . Do it with Wooster