Customer Reviews for ProHT 12-Outlet Aluminum Power Strip with 3 ft. Power Cord

Very good product. Many complaints about not being wall mounted. I used metal straps to attach to the wall. And it’s perfect. Hides all my wires for the TV and gets them up off the floor and hidden behind the curtain.

I'm really happy with them I maid a Christmas Tree Stand for my wife's Village. I had to come up with a way to secure it to the stand, there were no hangers on the cord but I made it work. Always a pleasure to shop at Home Depot

The power strip is awesome and I gave it four stars. It doesn't have mounting brackets or else I would have given it five stars. I made do and it's perfect for all the battery chargers I have for my power tools.

Fits multiple stepdown power sources without interference

Brackets not included, we need end brackets to assist bench mounting, an omission easily overcome at additional expense, otherwise as a power distribution strip this is quite an acceptable product. It should be noted there are absolutely no power conditioning, spike or surge absorbing components internally. This device simply transforms a single outlet into a switched 12 outlet extension cord, nothing more. At $10 it is well priced. Attractively styled. Intelligent receptacle spacing accommodates chargers. Free delivery is a convenient added bonus. As good a value from Home Depot as we have come to expect and depend upon.

I performed a safety check before using this power strip. It failed due to an "Open Ground" on all outlets. I disassembled the strip and found the Green wire of the power cord was floating and not connected. The Green wire had been soldered to a lug with another Green wire. The solder connection was probably very poor and came apart or was never connected? I made a solid solder connection and re-assembled the strip and put it into service. This issue was a significant safety issue!

works great but had to take apart and drill mounting holes apparently no mounting brackets available

The configuration of the outlets is ideal for those plugs with large box shaped plugs as they don't work will with the outlets that run the opposite direction. Wish it had slots for mounting to the wall as this is where I mounted mine.

As we acquire more and more small transformers for USB devices, we need outlet strips with the plugs turned to the side and spaced out to allow the transformers some room. And a single switch to cut all of them off at once.

This is long and built with common sense know how. The receptacles are wide enough apart that when you use standard adapters you don’t lose a receptacle. Most power strips do not factor this in if they do it is one or two openings. This is all the way across. The build quality is excellent it fits in a garage any shop or any facility with stainless appliances.

Nice, solid construction, but no mounting holes, slots, or hardware. Reasonable spacing on the outlets.

Excellent product... works for me

Great for Multiple Decorations

Rating provided by a verified purchaser

This is a simple, solid-performing device that does what it is supposed to do -- lots of outlets over a 36-inch space in a very sturdy metal housing.

These power strips are good, with plenty of outlets on the power strip but there is no good way to mount them. I removed the end caps and there is enough metal in the back to mount them with a self-tapping screw, but it's insane that you need to do surgery on them simply to mount them securely.

It's anodized aluminum. Nice finish. No sharp edges. The outlets have a good grip. Nice thick cord The length of the strip is exactly 36 inches. Needed better cable management under my desk. This definitely fit the bill.

It did not work for my application. I needed the power cord to come out the other end opposite the power switch and there were no mounting holes in the unit, which I also needed to attach to the wall.

Yes this is perfect for my electronic repair works station desk , I can plug in my test equipment and soldering irons and hot air workstations all at once.