Questions and Answers for BEHR MARQUEE 1 gal. #150B-7 Poinsettia Satin Enamel Exterior Paint & Primer

A:  Hi there, thanks for the question. If the paint has already been applied and the temperature rises above 90 there shouldn't be an issue. If you're still applying the paint and the temperature is above 90, it would cause the paint to dry faster and make it harder to work with. If you're applying the paint in extreme heat and the surface is very hot, it could cause the paint to bubble. Good luck with your project! -Ronald

A:  Hi Ed, thanks for the question. As long as the second coat is applied before the paint fully cures, you don't need to sand between coats. Typically, it takes our Marquee Paint about 4 weeks to fully cure. Have a great day! -Ronald

A:  Hi Dani, thank you for your question. Although we do not have the color details, I can suggest a few similar colors. Check out Oak Creek HDC-AC-07, Timber Brown N140-7, and Sweet Molasses PPU5-20. Have a great day! -Giovanna

A:  Hi Joan, thanks for the question. Yes, our Marquee Exterior Paint would be a great choice for brick. It has outstanding fade & dirt resistance, Have a great day! -Ronald

A:  Hi kenzie, thanks for your question. I don't recommend using our Marquee Exterior Paint on cabinets as this paint is not designed for interior surfaces. Instead, it's best to use one of our interior products. Have a great day! -Christina

A:  Hi Rob, thanks for the question. Since PVC has a smooth surface, it's recommended to first prime it with our Bonding primer as it's designed to adhere to smooth glossy surfaces. Then, you can top coat it with the Marquee Paint. Have a great day! -Ronald

A:  Hi there, thanks for the question. As long as the surface is clean, you shouldn't need to scuff sand the coating if you apply the second coat 14 days after the first coat. It takes approximately 4 weeks for the paint to fully cure, after that amount of time you would need to scuff sand the coating before applying another coat of paint. Good luck with painting your house! -Ronald

A:  Hi there, thanks for the question. Our Marquee Exterior Paint is our best exterior paint. It has excellent fade and dirt resistance and will protect against UV Rays. When painting over fiberglass, it's recommended to prime the surface first with our Behr Bonding Primer. Have a great day! -Ronald

A:  Hi Bubba, thanks for the question. Yes, our Marquee paint can be applied directly to plywood without needing a separate primer. Since it's a Paint & Primer in one, the first coat will act as the primer coat and the subsequent coats will act as the paint coat. Have a great day! -Ronald

A:  Hi Mike, thanks for the question. Our Marquee Paint is safe to use on vinyl. When painting vinyl, you want to choose a paint color that is close to or lighter than the original color. If you choose a darker color it can cause the surface to attract too much heat and warp the vinyl. Also if it is smooth vinyl, you will want to scuff sand it first before painting. Have a great day! -Ronald