Questions and Answers for BEHR Premium Advanced DeckOver 1 gal. #SC-365 Cape Cod Gray Smooth Solid Color Exterior Wood and Concrete Coating

A:  Hi Marilyn, thank you for your question. Our DeckOver is a two-coat product that covers 75 sq. ft. per gallon in two coats. This is a slip-resistant, waterproof coating. To prep your deck, use the All-In-One Wood Cleaner, No. 63, and allow it to dry completely. The coating does not require a topcoat or any other products. Good luck with your project! -Giovanna

A:  Hi James, thank you for your question. To provide the best advice, we'd like to learn more about your project and the type of wood you want to coat. Please reach out to us directly so we can further assist you. We hope to hear from you soon! -Lina

A:  Hi Patrick, thank you for your question. Our Advanced Deckover is formulated to adhere to your wood surface in good sound condition without needing a primer. After removing all loose coating, we recommend cleaning with our All-In-One Wood Cleaner No. 63. Have a great day! -Alex

A:  Hi Larry, thank you for your question. You can spray our Smooth DeckOver product with an airless sprayer using a .027-.035" tip and no mesh filter at 2400-3200psi. Do not thin the product. Good luck with your project! -Giovanna

A:  Hi Thomas, thank you for your question. Our DeckOver is designed to provide a one-year lifespan, but we have seen it outlast this before. For the best results, I recommend applying two coats. Have a great day! -Lina

A:  Hi Kathy, thank you for your question. Yes, our DeckOver is perfect for your project as it can be used on concrete and wood as well. The surface should be sound and the concrete should be rough. You can use an etcher to achieve the profile of 150-grit sandpaper. Then, once the surface is clean and dry, you can apply the recommended two coats. Good luck with your project! -Giovanna

A:  Hi WBpaint, thank you for your question. We recommend applying the Advanced DeckOver when surface and air temperatures are between 50F-90F. Lower temperatures and higher humidity can extend the dry time and may result in a tacky surface. Have a great day! - Randy

A:  Hi HDCDR - Thanks for your question. As it turns out, our Advanced DeckOver does not have an ICC rating. However, you're welcome to take a look at our Technical Data Sheet for this product to see all the ratings and certifications this product does have. Have a great day! -Christina

A:  Hi Doug58, thank you for your question. Yes, the Advanced DeckOver is a solid finish and should completely cover the previous stain when applied at its recommended spread rate. Have a great day! - Randy

A:  Hi CNB0903, thank you for your question. The Advanced Textured DeckOver can be applied to composite decking in good condition. Have a great day! - Randy