Model # FP601-2T

Internet #203705517

Store SKU #790076

Store SO SKU #1000114782

Custom Building Products Fusion Pro #60 Charcoal 1 Gal. Single Component Grout
0010186802374

Custom Building Products

Fusion Pro #60 Charcoal 1 Gal. Single Component Grout

  • Unsurpassed stain resistance with no sealing required
  • Ultimate color consistency
  • Easy to spread and clean
$54.97 /each

Frequently Bought Together

Product Overview

Custom Building Products #60 Charcoal 1 Gal. Fusion Pro Single Component Grout is a professional grade, single component sanded grout. Fusion Pro requires no mixing and is ready to use on ceramic, porcelain, glass tiles and polished natural stone. It is suitable for exterior and interior wall and floor use.

California residents: see   Proposition 65 information

  • Advanced acrylic plus silicone resin formulation
  • Provides superior color consistency
  • Includes microban antimicrobial product protection to inhibit the growth of stain causing mold and mildew on grout
  • Cures to a hardness similar to cement grouts
  • Easy to use, won't effloresce, spreads easily, saves time because it doesn't need to be sealed
  • Can be used on virtually all types of tile and natural stone
  • Crack and chemical resistant
  • For grout joints 1/16 in. - 1/2 in. (1.6 - 13 mm) wide
  • For use on countertops, tub surrounds, showers and high traffic areas
  • Sample colors shown may vary from actual grout; final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques
  • May qualify for a lifetime system warranty when combined with other custom lifetime warranty installation products



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Does this grout need to be sealed?

Asked by: ChrisDiMarioo
I would seal this grout or buy a different brand. I had my bathroom remodeled and the contractor used this grout to tile my shower. Had mildew stains on the floor within two months. Contractor cleaned and reapplied the grout, swore up and down it didn't need to be sealed. Well as you can see from the picture not six months later the mildew is worse.
Answered by: crimay
Date published: 2016-12-17

This grout left a terrible residue and discolored my tiles! HOW do I get this off!

Asked by: leanna
Hi Leanna - I had a bit of the same issue when I used it. I found that Original Windex WITH AMMONIA-D, (accept no substitutes) helped clean it up. Let it sit for a little bit, then: Expect to also use some "elbow grease" - I think I used a Scotchbrite pad - SAFE FOR NON-STICK to help, but try a good terry cloth rag first - the sooner the better - GOOD LUCK!!! Steve
Answered by: Steverino1984
Date published: 2016-09-13

will this product also stick to wood?

I am installing tile next to wood, will the epoxy grout also stick to the adjoining wood floor at the marriage line?
Asked by: Suz52
Yes. I installed a granite tile countertop and used red oak as trim around counter edge. Before grouting, I stained the wood and sealed it and then masked it off with tape. I've had it installed about a month, now, and all looks well.
Answered by: nzpete
Date published: 2016-10-14

Is Fusion Pro sold in 1/2 gallon or quart size?

Love this product and we have 1/2 a shower wall to grout so don;t wan to buy another gallon. Is their a 1 qt size?
Asked by: Tandem
yes
Answered by: JamesB
Date published: 2016-12-15
  • y_2017, m_2, d_23, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_77
  • loc_, sid_203705517, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 54ms
  • QUESTIONS, PRODUCT

Customer Reviews

Fusion Pro #60 Charcoal 1 Gal. Single Component Grout is rated 3.3 out of 5 by 353.
Rated 4 out of 5 by from OK, I see why people either LOVE it or HATE it! OK, I see why most people either love it or hate it! It does make a beautiful seam when finished, but it's not for the average DIY'er. This is a most unusual product, unlike any I've ever worked with. I'm no pro, but I know you cannot apply it like standard cementitious grout because you have nowhere near as much time to work it before it starts to dry. I'm not exaggerating when I tell you that this stuff starts setting up as soon as you pass your float across it! The very fine grit and film that is left behind will dry in like 1-2 minutes AND STICKS to the surface of the tile. (It MIGHT not be as rapid if working in high humidity, but I was in 50% or less) If you float too long/go too far without wiping it off, you will have a fight to get it off. I was laying 6x24 ceramic tile on tub surround walls and could only grout about 36"(1 long edge + 2 shorts) before I had to stop and wipe off. I used the sponge from HD that has the fabric on one side and recommend that one highly because you WILL have to scrub to loosen the grit at times when wiping down and the sponge side alone is not enough! (THAT gives you an idea how firm it sticks!) Well that felt like it was taking FOREVER, so I decided to try applying it with a homemade (Ziploc Qt/Freezer) grout bag. (I had noticed that when the stuff is not spread out thin it dries slower) That worked pretty well with my 1/8" lines that were not too deep. I filled about 36" at a time, with a bead that overfilled about 1/8" above the tile surface. I then came back with a damp 3" putty knife and packed it down flat, 3" at a time, from the side, to ensure fill. Then I scraped along the length to remove most of any excess, which I used on any low spots or tacked on the end where I had stopped the bead. Of course I STILL had to wipe across the seams to remove the residual, but it was a lot less work, mess and waste than the standard float method as none had dried on the tile face... I bought this because of the allure of not having to seal the grout. But compared to the difficulty I had in applying this stuff, sealing standard grout doesn't seem so bad. I have another one for the floor that I'm gonna return. But after reading this, some may decide they would not have a problem with it. I've never tried epoxy grout, but I can't imagine it being easier. Hope this helps.
Date published: 2016-09-30
Rated 1 out of 5 by from Avoid this product for large jobs! Stick with dry mix! Bought this grout for a 16'x16' room and read and followed the instructions. After a few 24"x24" areas I was through with this stuff. It sets/glazes in about 1 to 2 minutes and is a SOB to get off. It freezes to the tiles so well you wear yourself out trying to clean it up. I was using it on Montagna Wood Weathered Gray 6x24 tiles and this grout was all in the textured surface. It was a real headache. It stained the tiles darker and so far I cannot get it off. In the morning all of the buckets of Fusion Pro are heading back to the store and I will use the dry mix grout. For 1 or 2 tiles this may work but for lighter colored tile I would be wary. Imagine latex paint, sand and Elmer's Glue mixed together and you have a bucket of Fusion Pro...
Date published: 2016-09-03
Rated 1 out of 5 by from After one year exactly, mold is now forming in the grout on my shower floor. I spent a small for... After one year exactly, mold is now forming in the grout on my shower floor. I spent a small fortune completely installing a new shower and requested only the "best" grout product that would deter mold. I was assured, by Home Depot, this product would work. This shower is used only twice a week and wiped down completely after each use and door left open for full circulation to dry out. I am very upset and angry. NOTHING is removing the mold!!!! WOULD NOT recommend this product.
Date published: 2016-11-13
Rated 5 out of 5 by from Follow the directions My first grout job consisting of approximately 250sq of 1/4" lines on 1x2' tile. It turned out great. I received a compliment from my girlfriends dad who is a professional installer. Reading the negative reviews below is a bit frustrating. One way or another it seems a majority are simply not following the directions listed on the bucket(i.e. keep surface slightly wet, small areas at a time, clean methodically with sponge then microfiber etc) I don't usually write reviews but I do not think the product is being used correctly. ..or maybe I am a day 1 grout master. Either way i am looking forward to using this product in the bathrooms next.
Date published: 2017-01-22
Rated 1 out of 5 by from Terrible product I wish I had read reviews last November when I bought this stuff. We remodeled our master bath and used this grout in the shower and on the floor. I noticed that the grout in the shower was starting to come out last month. It has crumbled and now I am having to dig out all of the grout and use a different product. Save yourself the headache of having to replace this junk and use something else, otherwise you'll be redoing your hard work in 9 months. I hope that Home Depot removes this product from shelves because it isn't up to the standards that they generally have.
Date published: 2016-10-01
Rated 1 out of 5 by from Should be removed Terrible worst ever. Doesn't dry and a horrible mess highly recommend not using
Date published: 2016-09-04
Rated 4 out of 5 by from I don't know about the ones having issues with showers, probably not the best choice and go with ... I don't know about the ones having issues with showers, probably not the best choice and go with epoxy or mix a polymer in with cement grout for showers. But all the other negative posts about how difficult it is. Please you never used true epoxy grout have you. Just keep doing small areas and you won't have any trouble, I'm grouting 18" tiles and I will do a pattern of about 6 wipe those down and just keep moving. Just dont take any breaks after you put the grout down and before wiping with a sponge. Just use a grout sponge with the cloth on one side and use it first. Actually its very simple because there is no mixing and if you ever used epoxy grout well once you mix you are done 5 minutes later and throw away the rest of what you mixed.
Date published: 2016-11-19
Rated 1 out of 5 by from If I could I would give zero stars. Our contractor tiled our shower floor with it last March and... If I could I would give zero stars. Our contractor tiled our shower floor with it last March and by May we had mildew forming. He said it didn't need to be sealed but I beg to differ! No amount of cleaning works. Now it's a total mess. We have an open shower with just a small three foot glass partition so it's not humid in there. Plus we had two vents installed. Chances are we will have to replace our tile/grout. Do NOT use this product in a wet area!
Date published: 2016-12-14
  • y_2017, m_2, d_24, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_353
  • loc_, sid_203705517, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • REVIEWS, PRODUCT