Delta 60 in. Sliding Tub Door Track Assembly Kit in Chrome-SDLT060-C-R - The Home Depot


Model # SDLT060-C-R

Internet # 203905987

Store SKU # 1000003094

60 in. Sliding Tub Door Track Assembly Kit in Chrome

Delta 60 in. Sliding Tub Door Track Assembly Kit in Chrome

This item has been discontinued.
The Home Depot no longer carries this specific product.

$80.00 / each


Model # SDLT060-C-R

Internet # 203905987

Store SKU # 1000003094

With these beautiful shower doors you can create your own custom look in 3 easy steps. Choose your glass. Choose your track assembly kit and select your choice of a matching handle or knob. 5 Year Limited Warranty.

  • (1) Top track, (1) bottom track, (2) side jambs included in box
  • Detailed instructions and hardware included for easy installation
  • Constructed of corrosion resistant anodized aluminum
  • Fits doors with an opening min/max of 50-1/8 in. - 59-3/8 in. (127cm-151cm), with a 56-1/2 in. (143.5cm) height
  • 5 year limited warranty
  • Click here to customize your shower door


Assembled Depth (in.)  2.063 in  Assembled Height (in.)  58 in 
Assembled Width (in.)  60 in  Product Depth (in.)  2.063 
Product Height (in.)  58  Product Width (in.)  60 
Product Weight (lb.)  7 lb  Returnable  90-Day 
Warranty / Certifications
Certifications and Listings  No Certifications or Listings  Manufacturer Warranty  5 Year Limited Warranty 


Rated 4.4 out of 5 by 5 reviewers.
Rated 4.0 out of 5.0 by Quick Installation, Excellent Directions, All in One Kit I have to say that the three part shower door system by Delta is really what the DIYer is asking for when putting in a new shower door, or as in my case, replacing a 30 year old sliding door assembly on an existing tub surround. The track/frame assembly arrives in one slender box, with all the hardware you'll need and a very nice set of directions that guide you step by step to ensure success. When you unpack it, you'll notice the quality metal extrusions and the thickness/durability of the material. It cleans up to a nice shine after install. You have the choice of using the beaded/rolled design facing out as I did (see pictures) or the completely smooth side of the top track to match your tastes. Since the top track just rests on the sides, if you change your mind later, it can be swapped around as well. After you remove the original doors and tracks and clean the old caulking off, expect to spend about 2 and a half hours from beginning to end assembling the tracks and securing them to the tub surround. If you haven't done this type of work before, allow yourself a half day (4 hours) at the most. Take your time, it pretty much falls into place when you follow the steps. The only parts that would challenge a beginner would be cutting the top and bottom pieces to fit the width of your particular shower. If you have a good hacksaw with a quality blade, this will go much easier. If you have a power miter saw, this step takes mere moments to accomplish. The sides install quickly and easily with the holes predrilled in the jambs making locating new holes in the side of the shower a snap. The top track system snaps into place over the jambs and the glass hangs onto the top track quickly and without any struggle. The glass slides effortlessly on the well grooved track. Totally silent with no sticking. The bumpers and guides make sure the glass stays in place in the tracks and doesn't bang around. I'm recommending this to all my friends that want to install new shower doors. Don't wait any longer, you can't go wrong with this sliding shower door system! Start designing your new doors today. July 27, 2013
Rated 3.0 out of 5.0 by Cutting to size is Difficult Per the instructions given, using a fine tooth hack-saw and a miter box to cut the track is not as easy as illustrated. The track moves as you're cutting it because the miter box is not deep enough to hold the height of the track, even when you turn the track sideways. If you're lucky, you'll be able to re-cut or file the end you've tried to cut correctly. If I ever do this again, I'll ignore the instructions and take my chances with my reciprocating saw instead of the hack-saw. Good LUCK ! April 19, 2014
Rated 5.0 out of 5.0 by The finishing touch With a reversable design it give you a choice to gice it the professional look. January 15, 2014
Rated 5.0 out of 5.0 by Quality Product Just follow the instructions and you will have a quality replacement door track assembly installed in no time. October 16, 2013
Rated 5.0 out of 5.0 by excelant Good quality for the price and easy to install. Just follow directions and measure twice. That way you won't need to buy any replacement parts. September 17, 2013
1-5 of 5


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.