Dura-Gate 10 ft. Double Fence Gate Frame Kit-007-1402 at The Home Depot
Free shipping


Model # 007-1402

Internet # 202795339

10 ft. Double Fence Gate Frame Kit

Dura-Gate 10 ft. Double Fence Gate Frame Kit

This item has been discontinued.
The Home Depot no longer carries this specific product.

$359.90 / set
Item cannot be shipped to the following state(s): AK,GU,HI,PR,VI


In Stock



Model # 007-1402

Internet # 202795339

No more irritating dragging, sagging, or warping gates. Super-strong, long lasting, lightweight, heavy-duty aluminum gate frame with a powder coated finish. Ideal for heavy wood and other composite products.

California residents: seeProposition 65 information

  • Self-closing, adjustable, steel hinges that meets most pool codes
  • Rackable for uneven terrain
  • Easy installation with minimal assembly
  • Tools needed: hacksaw, tape measure, and #2 phillips screwdriver


Accessory Type  Other  Assembled Depth (in.)  6 in 
Assembled Height (in.)  81 in  Assembled Width (in.)  10 in 
Commercial/Residential Use  Commercial / Residential  Gate width (in.)  120 
Manufacturer Warranty  Limited Lifetime Warrenty  Material  Metal 
Product Depth (in.)  91  Product Height (in.) 
Product Weight (lb.)  49 lb  Product Width (in.)  10 
Returnable  90-Day 


Rated 4.4 out of 5 by 7 reviewers.
Rated 5 out of 5 by Great!! There is a pretty good gap between the gate and wall pickets due to the hinges/latch. The latch on this double gate is fine. But the latch on the small gate is accessible on only one side of the fence. To open the gate from the inside I attached a fish line to latch that I can pull from the inside of the fence. March 25, 2014
Rated 4 out of 5 by Easy assembly Nice sturdy kit with quality extra screws to secure boards to frame. However, when frame was squared up for proper board layout, the flat metal strap for diagonal support was far too short to be secured in predrilled corner holes as shown in instructional photos. Had to adjust and predrill to make it fit. Company needs to review this problem. Also recommend purchaser dry fit and mark board layout before hanging, as directions show boards mounted after frame is hung instead of before. September 25, 2012
Rated 5 out of 5 by Adaptable and it works Desoigned specifically for a picket gate, but we were able to bolt on a latice topped panel (with some effort) and adapt the design for our use. High quality hinge is unique and funtionally superb. Needed to switch out the clasp, but that is because we didn't use it for a picket gate. Instructions could be better, but not horrible. September 17, 2013
Rated 5 out of 5 by this assembly for a large gate is a great choice. Compared to a aluminum gate this is way cheaper. I used 2 and made a 6' opening. If you have any skills at all. Its easy to assemble. November 12, 2013
Rated 4 out of 5 by Materials good I ordered the 14 ft double fence gate frame kit and modified it by cutting it down to a 9+ foot double. I pre-drilled the frame and used the included screws and hinges. I put the whole thing up, pulled a string for the top level, and mounted cedar with a couple of clamps and the help of my 14 year old daughter. Total time was about 8 hours. Pros * The aluminum is top quality with a nice finish * Lots of extra screws came with the kit * hinge had nice adjustment feature * free shipping from HD Cons * Couldn't use the supplied latch for my application. April 24, 2012
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.