0764890160083

Fasade

Model 160-08

Internet #202655121

Store SO SKU #1000532886

4 ft. Brushed Aluminum J-Trim

Frequently Bought Together

Product Overview

These vinyl (PVC) trim components allow you to finish the edges for an inside corner return for backsplash, ceiling panels and wall panels. They are available in the same finishes as Fasade panels. Easy to install, these finish components add a professional touch to your project.

  • Vinyl (PVC) trims are perfect to hide the cut edge or the end of a run on your backsplash, ceiling panel or wall panel
  • No special tools required - cuts with scissors or utility knife
  • J-Trim pieces come in 4 ft. lengths
  • Finish matches Fasade decorative backsplash, ceiling panel or wall panel
  • Simple to clean with non-harsh cleaning products
  • ACP has been an industry leader for 20 years and prides itself on its products

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

6 Questions10 Answers

Customer Questions & Answers

4 ft. Brushed Aluminum J-Trim
4 ft. Brushed Aluminum J-Trim

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 4 ft. Brushed Aluminum J-Trim
 
3 answers

What's the width of this product? Fasade 4 ft. Brushed Aluminum J-Trim Model # 160-08 Internet # 202655121

This question is from 4 ft. Brushed Aluminum J-Trim
Asked by
Scott
Manhattan, KS
March 28, 2013
I'm looking for something that's 5 to 6 inches wide.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Florida
Read all my Q&A
April 9, 2015
Answer: 
It is just under half and inch wide. Easy to cut with scissors.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Fresno, CA, USA
Read all my Q&A
May 21, 2013
Answer: 
This is only about 1/2" wide...definately not what you are looking for.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 28, 2013
Answer: 
Hello Scott! Thank you for your question! The 4' long J trim is approximately 3/4 inch wide. Please feel free to contact customer care for installation troubleshooting (800.434.3750).
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
This question is from 4 ft. Brushed Aluminum J-Trim
 
2 answers

is this the appropriate j-trim to use for standard laminate that i believe is only about 1/16 " thick

This question is from 4 ft. Brushed Aluminum J-Trim
Asked by
north wales,pa
Read all my Q&A
November 1, 2014
I had to remove the original vertically installed edge which was glued in place so it was damaged when i removed it , I believe the standard laminate is only 1/16" thick am I correct and, if I am, will this j-trim work ?
Thanks
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Florida
Read all my Q&A
April 9, 2015
Answer: 
I would guess so. Considering the price, I would give it a shot!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

November 3, 2014
Answer: 
Hello! Thank you for your question! The Fasade trims were designed to work with our decorative panels only. The J-Trim will slide onto our panels to finish off a cut or exposed edge. Please feel free to contact customer care for any additional questions at 800.434.3750. Thank you!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 4 ft. Brushed Aluminum J-Trim
 
2 answers

Is this opening in this track 1/8 in. wide?

This question is from 4 ft. Brushed Aluminum J-Trim
Asked by
Pittsburgh, Pa.
Read all my Q&A
October 17, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Florida
Read all my Q&A
April 9, 2015
Answer: 
I think so.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

October 18, 2013
Answer: 
Hello THDBob4123! Thank you for your question! Yes, the opening of the 4' J Trim is 1/8" wide. Please feel free to contact customer care for installation troubleshooting (800.434.3750).
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 4 ft. Brushed Aluminum J-Trim
 
1 answer

Can this be used as a border on a ceramic stove top?

This question is from 4 ft. Brushed Aluminum J-Trim
Asked by
Read all my Q&A
August 14, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 15, 2016
Answer: 
Hello and thank you for your interest in our product. Even though the Fasade products are fire-retardant, they can be deformed by excessive heat (over 140 degrees Fahrenheit). The products can be installed above or behind most stoves. Be sure to keep direct heat sources – toaster ovens, cooking burners, etc., a minimum of 3 inches away from the backsplash panel’s surface. Please feel free to contact our Read More
Hello and thank you for your interest in our product. Even though the Fasade products are fire-retardant, they can be deformed by excessive heat (over 140 degrees Fahrenheit). The products can be installed above or behind most stoves. Be sure to keep direct heat sources – toaster ovens, cooking burners, etc., a minimum of 3 inches away from the backsplash panel’s surface. Please feel free to contact our customer care team at 800.434.3750 for any further questions or needed assistance. Thank you! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T13:13:46.315-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202655121, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.7 out of 5 by 3 reviewers.
Rated 2.0 out of 5.0 by NOT ALUMINUM!!! It is just aluminum look plastic. 3/16" thick. Fits over materials about 3/32" thick. October 13, 2015
Rated 4.0 out of 5.0 by A good purchase I purchased this trim because I can chipped and cracked an edge of my ceramic cooktop. For the damage I caused, I would have preferred the trim to be a little wider, although it does a good job of covering most of the chipped edge. Also, be aware, that I laid a hot oven rack on the trim and it either dented or melted it. Luckily, there was plenty left over so I could put in another new side. Despite the things I have mentioned, I would definitely recommend this product. March 24, 2015
Rated 5.0 out of 5.0 by Great Deal I purchased a real tin ceiling tiles for a back splash from another vendor and these provided the finishing touch...great deal and worked perfect. May 21, 2013
  • 2016-09-08 T14:39:37.528-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_202655121, prod, sort_default
1-3 of 3
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • REVIEWS, PRODUCT