Rated 4.6 out of 5Â by 90
Rated 4 out of 5Â by schlafe A quick installing great looking functional faucet
The KOHLER Barossa is a great looking fixture. The packaging was adequate as the faucet was protected within its own product box and was shipped inside a second cardboard box. The Barossa was also very easy to install and only requires a screwdriver and a wrench to complete the install. Installation directions are clear for both 1 hole and/or 2/3/4 hole sinks. The high arch of the spout does create a lot more space in and around the sink and the 360 degree rotation of the spout allows you to move the spout out of the way when it is not in use. The aerated stream has a significant amount of flow. The sweep spray is definitely powerful and works well when used to clean dishes with food remnant. Just a note that the two function button on the faucet head is not momentary and does require you to switch back and forth between the two types of sprays. The soap dispenser rotates freely allowing you to move it out of the way if necessary. Lastly the finish does seem to clean easily by wiping down with a wet cloth/paper towel. With regard to installation: My installation was on a 4 hole sink. The photo shows the 3 holes that are utilized by the faucet itself. The remaining hole (not pictured) is used by the soap dispenser. A single hole installation only requires the center post which utilizes a plastic washer, metal washer, and a bracket with two screws that you hand tighten into place. Once the bracket is in place you tighten the screws with a screwdriver to firmly secure the faucet post. Two plastic nuts hand tighten to the outer two threaded posts to secure the faucet plate on a sink with 3 or 4 holes.
January 7, 2014
Rated 4 out of 5Â by Mark good upgrade
As I have heard from others about faucet installs, removing the old one is always more difficult. Once the old one was gone, installing this was very easy. This was my first kitchen faucet install and it took about 15 minutes. The faucet works as advertised and the fan spray is helpful in washing debris into the disposal. The extension nozzle retracts as it should and docks magnetically without issue. I love how far it reaches, which is helpful for filling pitchers and pots while they stay on the counter. The handle has smooth operation but the faucet itself swivels just a bit more freely than my last one. My only real issue is with the soap dispenser. It swivels way too easily because the pump doesn't actually screw into the receptacle. It also drips soap into the sink after use. With such a great faucet, I expected the same quality with the dispenser. Other than that, it is a great upgrade to my kitchen.
December 29, 2013
Rated 5 out of 5Â by TommyBoy Great faucet!
This faucet is sleek, elegant, and is very easy to install. We had a very expensive Italian made faucet prior to the Kohler. That old faucet was installed the old school way and quickly became loose. If you've ever tried to tighten a faucet with a large nut you can appreciate how painful it is. Well, that old faucet was loose for three years and on my honeydo list until it finally broke. Thankfully !
I opted for the Barossa because of its design and features. The faucet installs with a large nut but that nut is actually tightened by two screws. You do not have to try to get a wrench around it. After you flush the lines, the sprayer line simply snaps into place. The spray head has a very strong spray which is great for rinsing dishes as well as the sink. The sprayer is held tightly in place by a magnet so it is not flopping about.
Well, I am happy to say that the installation was a breeze and we love this faucet. It looks beautiful and works flawlessly. If I had only known, I would have done this long ago. Looks amazing with the one hole installation.
A great buy at this pricepoint. Highly recommended.
January 22, 2014
Rated 5 out of 5Â by Tom3 Durable finish, easy to install
I expect plumbing fixtures to last a long, long time. That's why I'm only interested in manufacturers that have a good and long track record (because I want to be able to find replacement parts in the future) and that stand behind their products with a good warranty. For all the wonderful things that water does, it can also cause a lot of headaches. Being selective about the plumbing products I install gives me peace of mind.
Kohler is on my short list of plumbing manufacturers I trust.
I have some Kohler products that haven't had any issues but last month a relative (whose kitchens and baths use all Kohler fixtures) was having problems with one of their kitchen faucets. We work on projects together and he asked me to give him a hand. We diagnosed the problem, filled out the information on Kohler's support website and in a few days the parts arrived and the sink was as good as new.
Out of a dozen or so Kohler products in their home for many years only one had an issue and when it did have a problem Kohler was able to send parts to fix it. That's the type of dependability I want from products that get used multiple times a day and make your life miserable when they fail. Kohler has that level of dependability in my experience.
The Barossa faucet has a pull down sprayer. A button on the back of the spray head switches from a regular aerated stream to a fan-shaped spray pattern that is a lot more effective and powerful than the previous style sprayer my old faucet had. The button isn't a momentary switch. It stays on fan spray mode after you press it and you have to switch it back to the normal stream pattern when you're done with the spray. I think I would have preferred a momentary switch but that's a minor quibble.
The faucet also comes with a soap/lotion pump dispenser in a matching stainless finish as well as an escutcheon to cover up the three holes that may have been necessary for your old faucet. I really appreciated that the escutcheon was included as I was installing the faucet in a 4 hole (Kohler by the way) sink.
The faucet and escutcheon cover up the three holes that the old faucet was in and the soap dispenser takes up the space that the old sprayer called home. If this is a new installation you'll probably want to pick a single hole sink or cut your counter top for a 1 hole faucet as the escutcheon is really only useful if you're covering up unused holes. It can be installed without it. If you're upgrading your faucet on an older sink you get everything you need in the box.
And I mean everything. No plumbers putty or Teflon tape necessary. All you need are a pair of slip-joint pliers or a wrench, a screwdriver and a bucket.
Underneath the escutchen is a plastic insert that has a foam strip that runs all the way around it. A similar plastic piece that fits under the faucet also has foam. This foam is used in lieu of plumbers putty to create a seal to prevent any splashed water from getting under the faucet and dripping down into your cabinet.
Installation was a breeze and I was able to do it all myself with the exception of having someone catch the old faucet while I unscrewed it from underneath. I spent more time for each of removing the old faucet and cleaning off the gunk that was underneath it.
You only need to connect the braided tubing to the hot and cold supply lines. There are no plumbing connections that need to be made underneath the counter top behind the sink like with my old 3 hole, single lever faucet. You do have to get on your back deep in the cabinet to secure the escutcheon, sink and soap dispenser though but after turning the water on I didn't have to crawl back there to check for leaks.
There's a third braided tube where the mixed (hot/cold) water leads to the faucet head. Do not connect this until you turn on the water and flush the faucet (hot and cold) for 1 minute. Be careful though...
Make sure the faucet is off (handle pushed towards faucet) before you turn on the water. Water won't flow out the bottom (where you're flushing) if the water is off. Once you're sure you have the bucket in the right spot make sure that the copper tube has a clear path to the bucket. If there are any obstructions, like say one of the braided tubes, water will splash every where. If that happens turn the water off before you make a big mess and clear the path before trying again.
The handle should be pointing straight up so that you can flush both the hot and cold lines. When you're done flushing, the third braided tube (with the big white plastic end) clips onto the copper tube.
All of the tubing runs out of the bottom of the faucet. This includes the hot and cold braided supply lines, the copper tube that's the exit from the mixing chamber and the braided tube that leads to faucet head. Make sure they're all straightened out and not restricting the motion of the braided faucet tube because you need this to glide freely as you pull out the head to use as a sprayer. I'm guessing the one reviewer that had a problem might have somehow installed it in a way where the hose was binding somewhere.
Also make sure that the area where the hose hangs is clear and that the weight doesn't bang into anything (like plumbing lines) when you pull or release the spray head.
Kohler calls the finish "Vibrant(R) Stainless" and I tried to find out what was so special about their Vibrant(R) finishes. It looks like it's a PVD (Physical Vapor Deposition) applied finish. It's a way of applying a thin film on a surface in a vacuum using high heat. A couple of years ago the process was refined by NASA. One of the advantages is that it creates a more durable finish than older plating technology. It's also a more environmentally friendly process as well. The only disadvantages I found were related to being more difficult to manufacture.
Style and design are going to depend on personal preferences and fitting in with the other fixtures in the room so I won't comment much on that. The high arch makes it easy to put large items in the sink and to fill tall stock pots. I don't have any tall stock pots but I do have a furry little friend that likes to drink from the sink and the taller spout is easier to drink from.
A couple of things I like about the design of this faucet is the shorter lever compared to a typical single handle faucet. It makes it a little easier to operate. Also, because the water flows to the head through a braided tube that's inside the faucet body there are fewer moving parts of the faucet where water passes which should make it easier to maintain. Don't have to worry about lubricating or replacing o-rings to prevent leaking.
Great faucet, great finish and easy to install. The soap dispenser takes a little getting used to. Keep the sponge under it an extra second or two after you release the pump to catch that drip that always seems to fall when you're done pumping. It does hold a lot of soap though.
December 25, 2013
Rated 5 out of 5Â by DaninKaty Kitchen Faucet
This faucet is very easy to install. It took longer to remove the old faucet than to install the new one. The finish on this faucet matches our cabinet handles better than the old one did. It is very easy to move the faucet handle from hot to cold and the spout swivels with very little effort. Going from a single handle to this one has some getting use to. Instead of moving the handle to the left and right you move it front to back. So the cold is when you move it to the front and hot to the back. No special tools were required to install this faucet. The longer the phillips screwdriver you have the eaiser it will be tighting the spout/handle assembly. No other items were needed to completely install this system. Everything but the tools were in the box. The soap dispensor head just swivels around too easily. If you try to pump it too fast it might slip out from under your hand or spin away from where you want the liquid. Other than that it is a Kohler faucet and they are built very well and look and work just as nice. Should be here for as long as we own the house.
December 26, 2013