0027418633132

Model RMC202W

Internet #100055948

Store SKU #673831

Store SO SKU #1000632922

Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White

$166.00 /each
  • Vent-style grill blends in with any décor
  • Sturdy steel heating element designed for durability
  • Squirrel-cage blower increases airflow with low surface temps

Frequently Bought Together

Product Overview

The Cadet Register Plus 14 in. x 7-3/8 in. 2,000-Watt Fan-Forced Wall Heater has a clean, low-profile design and quiet operation for comfortable, wall-mounted electric heat. Often chosen for its similar appearance to a central system register vent, the Register features a large squirrel cage blower that quietly provides increased airflow allowing for lower surface and air-at surface temperatures. It features a commercial-grade steel element for durability and is designed for optimal warm-air circulation at any heat setting. Comes packaged with a wall can and white grille. A wall-mount thermostat is required.

  • Dual-rated in-wall, fan-forced heater with 2,000-Watt at 240-Volt or 1,500-Watt at 208-Volt
  • Can heat up to 300 sq. ft. perfect for many size rooms
  • Commercial grade steel element
  • Squirrel cage blower provides increased airflow, allowing for lower surface temperatures and quiet operation
  • Can be installed with mounting legs horizontally in wall cavity or vertically on sill plate to minimize installation time
  • Thermal safeguard: high temperature manual reset turns off heater if normal operating temperatures are exceeded
  • Clean, low-profile appearance with a white, powder-coated paint finish
  • In-wall, fan-forced electric heater resembles a central-system register vent
  • Find the right Cadet electric heater for your needs:

    Cadet Electric Heater Guide

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions6 Answers

Customer Questions & Answers

Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
 
3 answers

how to maintain and clean unit

This question is from Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
Asked by
Anonymous
October 4, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Seattle WA
Read all my Q&A
Home Improvement Profile: DIYer
October 29, 2014
Answer: 
Cleaning is actually pretty easy. This heater comes out of the holder really easy - just 1 screw. All you have to do is turn off the breaker (for safety) and wait for the unit to cool. Remove the wall cover. Remove the holding screw and pull out the heater - don't mess with the wiring. There should be enough slack to get it out of the wall.
Now just vacuum everything out. Use canned air for the hard to Read More
Cleaning is actually pretty easy. This heater comes out of the holder really easy - just 1 screw. All you have to do is turn off the breaker (for safety) and wait for the unit to cool. Remove the wall cover. Remove the holding screw and pull out the heater - don't mess with the wiring. There should be enough slack to get it out of the wall.
Now just vacuum everything out. Use canned air for the hard to reach places.
Do this once a year (just after summer). If you have pets, do it more often as pet hair can build up. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Auburn, WA, USA
Read all my Q&A
February 13, 2014
Answer: 
Cleaning is simple. You'll need a vacuum cleaner and compressed air or an air compressor. Once about every 6 months remove the cover of the heater, make sure the thermostat is turned off or all the way to low before you do this. Once the cover is off, you place the vacuum on one end of the heater. DO NOT touch any heating element with the vacuum hose as you may damage it. Turn on the vacuum and use the Read More
Cleaning is simple. You'll need a vacuum cleaner and compressed air or an air compressor. Once about every 6 months remove the cover of the heater, make sure the thermostat is turned off or all the way to low before you do this. Once the cover is off, you place the vacuum on one end of the heater. DO NOT touch any heating element with the vacuum hose as you may damage it. Turn on the vacuum and use the compressed air to blow any dust into the vacuum hose. Once finished, put the grate back on the heater and enjoy! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Vancouver, WA
Read all my Q&A
October 4, 2012
Answer: 
Hi Deb,
Thanks for asking such an important question for the community! Maintenance and cleaning should be done at least semi-annually, or every six months minimum. There are several steps to cleaning the heater, which are detailed in the owner's guide at the top of page 4. We've attached a link here:
http://www.homedepot.com/catalog/pdfImages/64/64f3df4c-9a8f-460f-91ed-e7e3b8c3b529.pdf
You can also Read More
Hi Deb,
Thanks for asking such an important question for the community! Maintenance and cleaning should be done at least semi-annually, or every six months minimum. There are several steps to cleaning the heater, which are detailed in the owner's guide at the top of page 4. We've attached a link here:
http://www.homedepot.com/catalog/pdfImages/64/64f3df4c-9a8f-460f-91ed-e7e3b8c3b529.pdf
You can also download the owner's guide directly from the link if you have Adobe® Acrobat® Reader. The most important thing to remember, before you begin, is to turn off the power at the circuit breaker!
Keep asking questions and happy cleaning! Read Less
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
 
1 answer

Can I reduce their speed or do something to reduced the noise?

This question is from Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
Asked by
Read all my Q&A
November 26, 2015
I bought two for the living room and one for the bedroom and they work fine but they are absurdly loud!!! Is there a way to reduce the noise? Maybe reducing the speed of the fan or adding some sort of filter?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 30, 2015
Answer: 
Hello and thank you for your question.
You could try replacing your heaters with the RM162. The RM162 is 1,600 watts as compared to 2,000 watts which is what you have right now. The RM162 may run a few minutes longer while it is on, but the reduced wattage will definitely help reduce the noise level. Please see the link below for the Read More
Hello and thank you for your question.
You could try replacing your heaters with the RM162. The RM162 is 1,600 watts as compared to 2,000 watts which is what you have right now. The RM162 may run a few minutes longer while it is on, but the reduced wattage will definitely help reduce the noise level. Please see the link below for the RM162.
http://www.homedepot.com/p/Cadet-Register-Multi-Watt-240-208-Volt-Fan-Forced-Wall-Heater-Assembly-Only-RM162/202863231 Read Less
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
 
1 answer

I bought this kit to replace my bedroom unit and the breaker trips immediately when on.

This question is from Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
Asked by
Seattle, WA
Read all my Q&A
October 26, 2015
I have replaced my old King 2250W unit with this one and now it trips the double pole 30 AMP breaker immediately when I turn it on, I'm using a Honeywell Thermostat but I don't believe that is the problem, any guess where I should look first?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 27, 2015
Answer: 
Thank you for your question.
From the information given, it sounds as if it could be a bad wire connection or possibly an overloaded circuit.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
 
1 answer

Can this unit be mounted vertically against a stud in wall where there is not enough room to mount it horizontally?

This question is from Register 2,000-Watt 240-Volt In-Wall Fan-Forced Heater in White
Asked by
Read all my Q&A
March 3, 2015
The studs where I need to mount it are not on 16" centers.

Thanks
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

March 3, 2015
Answer: 
Hello Greyhound10 and thank you for your question.
The wall can must be installed in the TOP UP (horizontal) position only. Heater is not approved for ceiling mount. It cannot be mounted vertically.
Best wishes on your project.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 of 1
  • 2016-09-08 T12:18:06.317-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100055948, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.7 out of 5 by 16 reviewers.
Rated 5.0 out of 5.0 by easy Was happy with the ease of installation. I was swapping out an old heater, and it was good that this was about 1/2 inch taller since the old heater was poorly installed and the larger size allowed concealment of heater removal damage. It was a real easy replacement March 31, 2016
Rated 4.0 out of 5.0 by Good Heater Overall I'm pretty happy with this product. It was easy to install, looks nice, didn't have the "burn in" period my last register needed which spit black soot out for the first few minutes. This heater is quiet, clean, slightly larger than my last heater but this one seems to kick out the heat pretty quick. Also has a very fast "on" response meaning once the thermostat clicks on, these heaters are already spinning at full speed! I also like the new can design and heater design over my old ones, these seem safer and more efficient. February 13, 2014
Rated 4.0 out of 5.0 by Solid Easy to install and makes decent heat. Has own reset button. February 10, 2016
Rated 5.0 out of 5.0 by heats too good i bought these for the bedrooms based on square footage & the fact that the house is 100 years old they are a little noisey for the rooms but wow! do they work i had to call cadet because i could not get them to work the tech support was with out question wonderful he explained in great detail what i did wrong & how to fix it also said he gets the same call all the time even from electricians made me feel a little better because what i did was misplace the double pole breaker in my b. box this style heater has worked with out any problems for almost 17 years in our church building you can't find a heater with a better warranty 5 years i am buying two more soon February 19, 2010
Rated 4.0 out of 5.0 by Easy to Install, fairly quiet I installed two of these in bedrooms. They are a little louder than I would like in a bedroom but are not bad. Installation was easy. March 30, 2015
Rated 5.0 out of 5.0 by Great value, form and function more than expected Some people mentioned the noise as an issue. Well folks it's a forced air unit. What do you expect from a squirrel cage and heating element? I have a central forced air. Systems that made just as much noise. I also had some great customer service from Cadet due to my contractor losing some parts. He actually liked it so much he said he was going to purchase ones for himself. Buy the cadet programmable thermostat, set it and forget it, I had as house guest and they really enjoyed the custom features for sleeping comfort. Usually I just put it in vacation mode and shut the door when not in use. March 27, 2013
Rated 5.0 out of 5.0 by Works better than advertised The unit was easy to install. Directions were clear and easy to understand. Took less than thirty minutes to install and have operational. Works great, provides heat to an area of the house that was lacking heat. January 14, 2015
Rated 5.0 out of 5.0 by Small heater, puts out alot of heat. Bought this heater to heat a 12'x16' addition. Very impressed by how well this works. I was expecting it to be bigger than is actually was, but dont let it fool you, it puts out alot of heat. December 8, 2014
  • 2016-09-08 T12:50:55.340-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_16, tr_16
  • loc_en_US, sid_100055948, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT