Model # IS16-R100

Internet #100375163

Store SKU #594333

Store SO SKU #592854

Simpson Strong-Tie 16 in. Insulation Support (100-Qty)
0044315396618

Simpson Strong-Tie

16 in. Insulation Support (100-Qty)

$12.67 /case

Frequently Bought Together

Product Overview

Keep your insulation firmly in place with the Simpson Strong-Tie Insulation Supports. The insulation supports are cut from carbon steel, spring wire for optimum flexibility and strength. Mitered tips dig into the wood, securing itself and insulation when installed between joists.

  • Install between joists
  • For 16 in. on-center spacing
  • Follow insulation manufacturer’s installation instructions
  • Wear safety glasses, gloves and other appropriate safety equipment
  • Length: 15-1/2 in.
  • Made from 14-Gauge wire
  • How much do you need? Let our calculator help:
    Insulation calculator button

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions18 Answers

Customer Questions & Answers

16 in. Insulation Support (100-Qty)
16 in. Insulation Support (100-Qty)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
7 answers

I need a product which will span 16 inch enginered floor truses in a basement ceiling. Will this 16 in product work for me?

This question is from 16 in. Insulation Support (100-Qty)
Asked by
Linda
Sevierville, Tn
December 10, 2012
I noticed under specifications it says the product is 15.5 long. So are thet 15.5 or 16 inches? Thanks. Linda
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Quinoy Il.
Read all my Q&A
Home Improvement Profile: Professional
June 16, 2015
Answer: 
Yes and depending on the finish on how many you will need. If dry walling you may only need one every 18 to 24 inches depending on insulation fit to hold up until drywall is up otherwise you may need every 12 + inches to keep up and from sagging.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Knoxville, TN
Read all my Q&A
March 18, 2015
Answer: 
It should. The product is a bit longer than 16 inches so it will fit in the space.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
May 7, 2014
Answer: 
The product is 15.5 inches long. Yes it will work on your engineered floors since they measure 16 inches from the center of your trusses.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
rob
Blue Ridge, GA 30513, USA
January 21, 2014
Answer: 
measure the distance between the joist. It should be less then 16 inches. the joist are at list 1 1/2 inch wide. 16" - 1.5". OK?
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Virginia Beach, VA, USA
Read all my Q&A
June 18, 2013
Answer: 
It will do the job for you. I'm on my second box. These are actually 20" I think. They are made for exactly what U are doing. A snap to install - stick on 1st side and bend up to secure the other side - NO TOOLS required
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
New York
Read all my Q&A
January 1, 2013
Answer: 
Yes the flor trusses are set 16" on center therefore the space between is less than 16". The space is probably like 14.5" so this product will work.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

December 11, 2012
Answer: 
Hello Linda and thank you for your question.
The Simpson Strong-Tie 16 in. OC Insulation Supports are an easy one-hand installation to hold insulation in place. The mitered edges ensure a tight fit when installed between joists. No fasteners are required.
You will install the Insulation Supports between the joists. IS16 are 15-1/2" long for 16" on center spacing. Wear safety glasses, gloves and other Read More
Hello Linda and thank you for your question.
The Simpson Strong-Tie 16 in. OC Insulation Supports are an easy one-hand installation to hold insulation in place. The mitered edges ensure a tight fit when installed between joists. No fasteners are required.
You will install the Insulation Supports between the joists. IS16 are 15-1/2" long for 16" on center spacing. Wear safety glasses, gloves and other appropriate safety equipment. You can see how to install the supports by checking out the drawing found at the top of the information page located here: http://www.strongtie.com/ftp/catalogs/c-diy05/C-DIY05_p23.pdf.
Best wishes on your project. Read Less
+3points
4out of 5found this answer helpful.
Was this helpful?helpful4unhelpful1
 
6 answers

I have a 1650 SQFT home how far apart do I space the ties? How many cases will I need?

This question is from 16 in. Insulation Support (100-Qty)
Asked by
sssandelin
sonora, ca
September 25, 2011
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (6)

Asked by
Quinoy Il.
Read all my Q&A
Home Improvement Profile: Professional
June 16, 2015
Answer: 
Depending on the finish on how many you will need. If dry walling you may only need one every 18 to 24 inches depending on insulation fit to hold up until drywall is up otherwise you may need every 12 + inches to keep up and from sagging.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
May 7, 2014
Answer: 
There are two answers; depends on if you are using it for the walls or ceiling. A standard 8 foot wall will take about 4 of these. An 8 foot run on the ceiling will take 6. The main reason is gravity and the weight of the insulation. You will find that you can use less if you keep the insulation in one piece when you install it. If you use multiple smaller pieces you will have to use more and you will Read More
There are two answers; depends on if you are using it for the walls or ceiling. A standard 8 foot wall will take about 4 of these. An 8 foot run on the ceiling will take 6. The main reason is gravity and the weight of the insulation. You will find that you can use less if you keep the insulation in one piece when you install it. If you use multiple smaller pieces you will have to use more and you will also be leaving gaps where your insulation isn't working properly. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Virginia Beach, VA, USA
Read all my Q&A
June 18, 2013
Answer: 
1 foot apart is the recommend by most insulation mfgrs. At 18" separation the insulation sags a bit
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Read all my Q&A
March 5, 2013
Answer: 
you need 1 about every 2-3 feet
-1point
1out of 3found this answer helpful.
Was this helpful?helpful1unhelpful2

Asked by
Virginia, USA
Read all my Q&A
February 7, 2012
Answer: 
The number of hangers needed is not based upon the relation of square footage. It is dependent upon the insulation itself. For example, normally a hanger should be installed within 4 inches of each end of the particular insulation run and then 12-16 inches apart otherwise. (to install a single four foot run of insulation you would need at least four hangers - one on each end and at least two to cover the Read More
The number of hangers needed is not based upon the relation of square footage. It is dependent upon the insulation itself. For example, normally a hanger should be installed within 4 inches of each end of the particular insulation run and then 12-16 inches apart otherwise. (to install a single four foot run of insulation you would need at least four hangers - one on each end and at least two to cover the remaining middle section.) Read Less
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
SteelToes
Chicago IL
September 26, 2011
Answer: 
Hi there
This is George from our How-To-Community.
Depending on the thickness of the insulation you are working with,insulation supports are usually spaced out anywhere from 16" to 24" apart.Case of hundred supports will cover approximately around 300 square feet or 200 linear feet when spaced 2 feet apart.
For 1650 SQFT area you would need 5-6 cases of insulation supports.
Hope this helps and good Read More
Hi there
This is George from our How-To-Community.
Depending on the thickness of the insulation you are working with,insulation supports are usually spaced out anywhere from 16" to 24" apart.Case of hundred supports will cover approximately around 300 square feet or 200 linear feet when spaced 2 feet apart.
For 1650 SQFT area you would need 5-6 cases of insulation supports.
Hope this helps and good luck with your project. Read Less
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0
 
3 answers

what are the things called that attach brick face to the home

This question is from 16 in. Insulation Support (100-Qty)
Asked by
Read all my Q&A
May 7, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
August 21, 2016
Answer: 
Fleshing. It should be installed on top of your Windows/doors behind the bricks to invent any water infiltration. I just ran into this issue, as the developer of my condo never installed one
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Quinoy Il.
Read all my Q&A
Home Improvement Profile: Professional
June 16, 2015
Answer: 
are you referring to metal lathe, an expanded metal attached to the structure used to attach the cement and brick fascia
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 11, 2015
Answer: 
I’m not completely certain either of these is what you are referring to, but please see the BT brick tie or the Heli-Tie™ Helical Wall Tie here on the Home Depot website. Thank you!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

insulation

This question is from 16 in. Insulation Support (100-Qty)
Asked by
florida
Read all my Q&A
September 18, 2015
I have an 18,000 sq ft house built in 1992
70% of the insulation under the house has fallen down
The insulation is still good, it just needs to be secured better. Obviously the builders did as little as they could get away with!
I called an insulation company and they want to charge me $595 to do the job. I looked at a utube video and I'm thinking I could probably do it myself even though I don't like small spaces!!
How many cases would I need to do the job well....looks like the builders space the rods unevenly from 2ft apart to 4ft apart
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Maryland
Read all my Q&A
Home Improvement Profile: DIYer
January 6, 2016
Answer: 
Forget the rods. The problem with rods is they fall out - sooner rather than later - no matter how you space them. That's probably why your insulation fell down in the first place. Better solutions are stapling chicken wire, webbing, or straps under the joists; or nailing wood slats under the joists. Not hard work, just time consuming. But if you really have an 18,000 sf house you many need an army of Read More
Forget the rods. The problem with rods is they fall out - sooner rather than later - no matter how you space them. That's probably why your insulation fell down in the first place. Better solutions are stapling chicken wire, webbing, or straps under the joists; or nailing wood slats under the joists. Not hard work, just time consuming. But if you really have an 18,000 sf house you many need an army of people to help you; 1,000 - 1,500 sf crawl space or basement is already pretty big. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

September 22, 2015
Answer: 
The insulation supports are to be installed following the insulation manufacturers installation instructions therefore we cannot say how many you would need. We can tell you the IS16 comes 100 pieces per package and there are 15 packages per carton. Thank you!
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1
1 of 1
  • 2016-10-30 T23:21:57.916-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100375163, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 332ms
  • QUESTIONS, PRODUCT

Customer Reviews

16 in. Insulation Support (100-Qty) is rated 4.8 out of 5 by 41.
Rated 5 out of 5 by from Super easy to use and does the job of holding up bats and rolls of insulation. Installed rolls i... Super easy to use and does the job of holding up bats and rolls of insulation. Installed rolls in a crawlspace to insulate the floor above and these sped up the process.
Date published: 2016-12-29
Rated 5 out of 5 by from just like a nail in the coffin just like a nail in the coffin
Date published: 2016-12-07
Rated 4 out of 5 by from Easy to use. Good support Easy to use. Good support
Date published: 2016-11-22
Rated 5 out of 5 by from Researched the product on-line to determine how to use the product to hold up insulation in a cra... Researched the product on-line to determine how to use the product to hold up insulation in a crawl space.
Date published: 2016-12-08
Rated 5 out of 5 by from Very easy to install and goes a long way! I ended up returning 8 bags because it covers so well. Very easy to install and goes a long way! I ended up returning 8 bags because it covers so well.
Date published: 2016-12-29
Rated 5 out of 5 by from Insulation stays keep insulation up in joist bay, paper will fail in time, these don't. Insulation stays keep insulation up in joist bay, paper will fail in time, these don't.
Date published: 2016-12-28
Rated 5 out of 5 by from This product worked as advertised and made insulating a crawl space very easy! This product worked as advertised and made insulating a crawl space very easy!
Date published: 2016-12-28
Rated 5 out of 5 by from Insulation Support Easy to install & did exactly what they were supposed to do!
Date published: 2016-10-25
  • y_2017, m_1, d_18, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_41
  • loc_, sid_100375163, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 53ms
  • REVIEWS, PRODUCT