WingIts Grab Bar Fastener Refined Engineered Safety RES (Set of 2)-RC-RESGBW35-2 - The Home Depot


Model # RC-RESGBW35-2

Internet # 202552917

Grab Bar Fastener Refined Engineered Safety RES (Set of 2)

WingIts Grab Bar Fastener Refined Engineered Safety RES (Set of 2)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$13.97 / each


Model # RC-RESGBW35-2

Internet # 202552917

Rated up to 600 lbs. in tile and drywall. The RES incorporates the World's Strongest Fastener Technology, to allow for quick installation of WingIts Grab Bars. Cost effective, the RES is fire retardant and installs completely waterproof in New and Existing construction. The RES is used extensively in Commercial, Institutional and Residential Grab Bar Installations. No blocking or Wall Studs Required. Average time to install a Grab Bar is less than 10 minutes. Fire-Retardant and Waterproof. Compatible with WingIts Grab Bars. When installing the RES into Ceramic Wall Tile, Plaster or Marble, use the Apache200 drill technology for quick, precise holes. 3/4 in. Holes Required. No caulk needed - self waterproofing. Designed for 2 in. x 3 or larger hollow walls and wall substrates from 1/4 in. - 1.3 in. thick. Exceeds all Building Codes and ADA Guidelines. Installs One WingIts Grab Bar. Made in the USA.

  • Exceeds all building codes and ADA guidelines
  • Self-waterproofing
  • Installs in minutes - lasts a lifetime
  • No blocking or studs needed
  • Install a grab bar exactly where you want it - exactly where you need it
  • Guaranteed to never loosen
  • Made in the USA

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Anchor height (in.)  3.5  Anchor length (in.) 
Assembled Depth (in.)  5.5 in  Assembled Height (in.)  3.5 in 
Assembled Width (in.)  1.5 in  Product Depth (in.)  5.5 
Product Height (in.)  3.5  Product Width (in.)  1.5 in 
Required drill hole size (in.)  .75 
Drive Style  Phillips  Fastener Callout Size  #10 - 32 x 3.5" 
Fastener Head Style  Pan  Fastener Plating  Stainless Steel 
Fastener Thread Type  Standard  Fastener Type  Specialty Fastener 
Fastener/Connector Material  Stainless Steel  Finish Family  Mixed Finishes 
Indoor/Outdoor  Indoor/Outdoor  Maximum Weight Capacity (lb.)  600 
Package Quantity  Primary Use  For quick installation of WingIts Grab Bars in new and existing construction. 
Product Weight (lb.)  .15 lb  Returnable  90-Day 
Weight Capacity (lb.)  600 
Warranty / Certifications
Manufacturer Warranty  10 Years from Date of Installation 


Rated 4.3 out of 5 by 6 reviewers.
Rated 5 out of 5 by They work to hold up Wingits Grab Bars Used the Wingits fasteners to hold up both ends of a Wingits grab bar. I used the Apache 200 Drill Bit to make the hole through tile and mortar. The instructions for the fasteners need to be revised for home owners who have not hung up grab bars where there is no stud. The fasteners come with a self sticking pattern (permanent and water proof) and the direction of this pattern that you stick to the wall needs to match the direction of the holes in the grab bars. Also the directions say to compress the wings through the holes in the wall, I had to use pliers to accomplish this. All in all, everything works to secure the grab bars through the walls when there is no stud available. March 9, 2014
Rated 5 out of 5 by Installed with no issues and very happy I purchased these fasteners along with their Apache drill bit to install a grab bar for my elderly next-door neighbors. I thought it would take most of the afternoon to get this done however much to my surprise I was back home in less than 30 minutes. The grab bar completely installed and will never move. I would suggest anyone use these to install a grab bar. September 20, 2011
Rated 5 out of 5 by Awesome Product! I needed to put grab bars up in my Dads bathroom. He is a big man and I was extremely concerned about not being able to locate the studs over the tile. I am not that handy when it coms to carpentry work. BUT it only took me about 15 minutes to install the wingit. The waterproof tape acted as a template and made it extremely easy to locate the bars and then drill the holes. The wingit requires 2 -3/4" holes for each flange, which was extremely easy to make with the apache drill bit - this is an absolute must. It went through tile like butter. The installation was quick and easy - I popped the wings in the wall through then template and then put the screw through the flange and tightened with my cordless drill. My brother who weighs 420 lbs and is a professional contractor did not believe any fastener could hold. He wanted to rip apart the walls, put wood between the studs and rebuild the bathroom. He bet me 50 bucks he could bust out the bar. The grab bar never budged - he was amazed. AWESOME PRODUCT! the fastest 50 bucks I ever made. Than You - WingIts! September 22, 2011
Rated 5 out of 5 by Unexpected hole spacing This fastner is made to go in the wall in off set holes. Unfortunately we drilled the holes before putting the gasket/template in place. Next time I must READ THE INSTRUCTIONS! It looks like the fastener will work fine. Awaiting replacement parts. January 25, 2012
Rated 4 out of 5 by Not as easy as they said They are very well made, but I had a heck of time getting them to work as described. I would recommend these to someone more adept at this type of job than myself. April 2, 2013
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.