A: Its always Good To Buy Anything if Its A Life Time Warranties,,and Save the Recipe in case..Thanks For Your Time
by|Dec 5, 2020
A: I have only taken one back but I didn't have any problems with getting it replaced.
by|May 24, 2022
1 found this answer helpful
A: No not yet
by|Feb 18, 2021
A: Time will tell
by|Jan 29, 2021
Q:Does this have a bottle opener on the back clip
by|Sep 24, 2020
4 Answers
Answer This Question
A: Yep, Looks like the belt clip has a bottle opener cut into it. Just tried it, even if that wasnt the intent, it works.
by|Mar 16, 2024
2 found this answer helpful
A: No
by|Dec 18, 2020
1 found this answer helpful
A: Mine didn't.
by|Nov 22, 2020
A: Oh fo sho
by|Jun 5, 2021
1 found this answer helpful
Q:Defeats the purpose of latching onto an end of a board and pulling. Will be an 1/8” off every time.
by|Aug 23, 2020
7 Answers
Answer This Question
A: Tape measures are intentionally designed with play in the end clip to account for inside versus outside measurements. The play should be exactly the thickness of the clip.
by|Nov 27, 2023
6 found this answer helpful
A: All tape measures have a little play in them but some are worse than others. When you make your mark or line try cutting right on the line the blade of saw will make up the difference. Also always remember to keep it in mind that you have the extra play on the tape.
by|May 2, 2022
1 found this answer helpful
A: Just one of many problems with this tape measure... I dumped it for a Kline Tools seen here: https://www.homedepot.com/p/Klein-Tools-25-ft-Tape-Measure-with-Magnetic-Double-Hook-9225R/311133921 A little pricey, but hasn't failed me in heavy use.
by|Sep 12, 2021
1 found this answer helpful
A: It happened to me as well until I realized what was happening. Wasted some material but other than pretty solid tape measure
by|Sep 3, 2021
A: I thought so too. However the play is intentional. Think about it this way. When you pull on the tab, you measure from the end of the board. If you push on the tab, than you measure from the side of the wall. It's to make sure it's accurate whether you measure outside length or inside length.
by|Jul 19, 2021
A: Agreed. The play is too much. No way the end clip is that thick. Just account for it.
by|Nov 13, 2020
A: I bought mine I had a old Milwaukee I had for years so I bought this new one for only 10 bucks I’m a happy camper.
by|Sep 1, 2020
Q:I measured 11.5' and tape will not re-tract
by|Aug 6, 2020
5 Answers
Answer This Question
A: Hi Woody! Please call our service team at 1-800-SAWDUST to review your service and warranty options.
by|Sep 19, 2020
1 found this answer helpful
A: No I bought like a week ago and it is not what I expected the auto lock don’t lock no more it just goes back it and I only used for putting moldings not good expected better for the brand.
by|Sep 19, 2020
1 found this answer helpful
A: i got mine becuz of the auto lock maybe you did not press the lock hard enough
by|Aug 25, 2020
A: Was sent the wrong one and didnt have time to return it before I scuffed it up. I order the 12ft reach but got the 9 instead:(
by|Sep 10, 2020
A: It would not retract after 10 ft that makes a man very angry threw it in the trash where it is supposed to be not a good product at all
by|Sep 19, 2020
1 found this answer helpful
Q:How do I get my tape measure replaced if I can't find the receipt? It cracked on the side.
by|Aug 5, 2020
4 Answers
Answer This Question
A: I just took it back and said I wanted to exchange it for the same one.
by|Nov 22, 2020
A: IF YOU HAVE A PRO ACCOUNT ALL YOUR PURCHASES ARE REGISTER TO YOUR ACCOUNT. HOPE THIS HELPS. 709
by|Aug 7, 2020
A: If you used your credit car, you can go in to customer service inside Home Depot and let them swipe your card. Then they can reprint the receipt for you. If that doesnt work, call Milwaukee direct at 1-800-SAWDUST. they should be able to help you out.
by|Aug 6, 2020
A: Home depot tracks orders if you have an account online. Or your original payment method can also lookup purchases.
by|Jul 20, 2021
Q:My auto lock to stop locking on my table how do I seek warranty
by|Jul 13, 2020
3 Answers
Answer This Question
A: Not sure if there is one but you can try taking back and see what happens.
by|Jul 14, 2020
A: Take it to the store I did.
by|Jul 20, 2021
A: Hey there! A service technician would need to evaluate your tape measure in person to determine warranty coverage. Please call our service team at 1-800-SAWDUST to review your warranty and service options.
by|Jul 13, 2020
Q:How far can I pull it out before it bends
by|Jun 7, 2019
5 Answers
Answer This Question
A: This tape measure will start to arc at around 4-5'. Actual 'bending', I have slowly fed mine out to 8' + before it actually folds over.
by|Jul 31, 2023
4 found this answer helpful
A: i think 24 ft will be safe
by|Aug 11, 2020
A: It says 9 ft but really it's around 8.5ft
by|Aug 6, 2020
1 found this answer helpful
A: They say 9 foot, which is shorter than Dewalt and Stanley. The tape is really thin, and mine was usually breaking at around the 8 foot mark. Definitely can't use it to measure crown.
by|Aug 6, 2020
1 found this answer helpful
A: 9 ft.
by|Aug 9, 2020
3 found this answer helpful
Q:What is the width of the tape measure? Is it 1"?
by|Mar 23, 2019
5 Answers
Answer This Question
A: Yes one inch
by|Jun 8, 2019
2 found this answer helpful
A: yes. and the numbers are big and clear
by|May 28, 2019
A: yes 1''
by|Apr 27, 2019
1 found this answer helpful
A: Yes
by|Apr 27, 2019
1 found this answer helpful
A: It is 1".
by|Sep 19, 2020
2 found this answer helpful
Q:Does this have metric markings?
by|Feb 11, 2019
5 Answers
Answer This Question
A: No.
by|Aug 6, 2020
2 found this answer helpful
A: No metric.
by|Apr 27, 2019
1 found this answer helpful
A: Yes it does
by|Aug 6, 2020
A: No...Milwaukee does manufacture SAE / Metric Tape Measures...
by|Mar 16, 2024
3 found this answer helpful
A: No it doesn't
by|Apr 27, 2019
1 found this answer helpful
Q:Does this show measurements on both sides of the tape, front & back?
by|Feb 8, 2019
5 Answers
Answer This Question
A: No, only on the front.
by|Jun 8, 2019
1 found this answer helpful
A: No, the tape is nt double sided.
by|Jun 8, 2019
1 found this answer helpful
A: Marking are on both edges of the top service. The underside is blank.