A: QUIKRETE Construction Adhesive should only be placed on dry surfaces.
by|Oct 31, 2022
Q:I have concrete splash blocks under my down spouts and a couple of them broke. They are clean breaks. Will this be able to hold them back together. Once they are bonded they will just be laying on the ground.
by|Oct 12, 2022
2 Answers
Answer This Question
A: QUIKRETE® Construction Adhesive can be used to bond broken masonry units. Once cured, this material is water resistant.
by|Oct 13, 2022
A: I use that on concrete landscape blocks and it keeps them in place so I don't see why it would not work on your splash blocks
by|Oct 18, 2022
Q:How long do these products last outside and in a very sunny location about 1.5 miles from the ocean.
by|Sep 24, 2022
1 Answer
Answer This Question
A: A tube of unopened QUIKRETE® Advanced Polymer Construction Adhesive has a shelf life of approximately 12 months from the date of manufacture. Once a tube is opened and the material is exposed to air/moisture, it will begin to cure, even inside the tube if not sealed. The ideal circumstance is to use a tube in its entirety at one time as resealing the tube proves difficult. An airtight and moisture-tight seal where the tube was punctured may extend the life of the material. Low humidity and cooler (but above 40 °F) temperatures may also extend the life.
by|Dec 12, 2022
1 found this answer helpful
Q:The base of my birdbath broke. It?s a clean break and wondered if this product will be strong enough to hold it together. Thanks
by|Sep 7, 2022
1 Answer
Answer This Question
A: QUIKRETE Construction Adhesive can be used to repair a masonry bird bath base. Mechanical fastening may be required while the adhesive sets. Typical cure-through time for this product is 2-3 days.
by|Apr 22, 2023
Q:Can this product be used to adhere stone veneer to pool coping?
by|Aug 30, 2022
1 Answer
Answer This Question
A: QUIKRETE® Construction Adhesive can be used to attach veneer stones to a pool coping. Mechanical fastening may be required until the adhesive has set, depending on stone orientation and weight. Allow to cure for 7 days prior to temporary water immersion.
by|Jan 12, 2024
1 found this answer helpful
Q:Can this product be used for filling in small driveway cracks? If so what is the width and depth limit.
by|Aug 3, 2022
1 Answer
Answer This Question
A: QUIKRETE® Advanced Polymer Construction Adhesive is intended for repairing broken concrete or fastening materials to concrete and masonry. It is not suitable as a crack filler. Please contact our customer service representatives at 800-282-5828 for product selection assistance.
by|Aug 4, 2022
Q:Will this product work to adhere ABS foundation vent covers to the outside of our old concrete foundation?
by|Jul 13, 2022
1 Answer
Answer This Question
A: QUIKRETE® Construction Adhesive will bond to ABS (Acrylonitrile butadiene styrene) fixtures.
by|Jul 25, 2022
Q:Will this work to attach an aluminum railing to the top of bricks?
by|Jun 26, 2022
1 Answer
Answer This Question
A: QUIKRETE® Construction Adhesive will adhere aluminum to brick. The aluminum may need to be sanded to create a rough surface profile for adequate bonding.
by|Oct 3, 2023
1 found this answer helpful
Q:Will this work to glue down PVC (G-Floor) to concrete in the garage? Just want to seal all edges to prevent water from seeping under PVC.
by|Jun 22, 2022
1 Answer
Answer This Question
A: QUIKRETE® Construction Adhesive can be used to adhere PVC to clean concrete.
by|Apr 26, 2023
1 found this answer helpful
Q:I am looking to attach 1/2" brick vaneer (2.25x7.75) to a stair riser, that is just mortor. The 1/2" brick vaneers are actually brick, I sliced them off full bricks with a wet saw. Is the Quckcrete Construction Adhesive the best product to use for this?
by|Jun 19, 2022
1 Answer
Answer This Question
A: Depending on the thickness of the installation bed, a few products are more suitable. For beds of 3/8” thick or greater, QUIKRETE® Mortar Mix or Mason Mix can be used. For thinner bed installations, a thin-set mortar for tile installation can be used. If no mortar bed is desired, the QUIKRETE® Advanced Polymer Construction Adhesive is suitable.