Q:I bought this router and i recently purchased the Bosch RA1181 Router Table. Is there an adapter plate so i can mount this router on the table.
by|Jun 22, 2020
2 Answers
Answer This Question
A: Ian,
Thank you for contacting us about RIDGID 11 Amp 2 HP 1/2 in. Corded Fixed Base Router. We do not offer an adapter plate. You would need to contact the manufacture of your table for more information.
Thank you,
JJ
by|Jul 9, 2020
A: I bought the ra 1171 and didn't need one. once you remove the base plate from your router, I rotated the router and it lined up with enough drilled holes to fit Use the base plate to find the right holes. I had to drill one more hole to adjust the router height from the bottom using the supplied wrench. My cabinet was inclosed and I had to notch the rear of the cabinet as one on the router handles hit the back of the cabinet but it works like a dream.
by|Jun 25, 2020
Q:can you use 1/2" router bits?
by|May 8, 2020
3 Answers
Answer This Question
A: Yes, the default collet is 1/2 inch and it includes an adapter collet for 1/4 bits.
by|May 12, 2020
A: Hi Alec, this Ridgid R2200211 Amp 2 HP 1/2 in. Corded Fixed Base Router comes with a 1/2" bit collet, and includes and adaptor for use with 1/4" bits. Thanks for asking! - Eve
by|May 12, 2020
A: Yes, this is a 1/2" collet router
by|Jun 22, 2020
Q:is the bit depth easy to adjust on this router when it is in a table?
by|May 3, 2020
2 Answers
Answer This Question
A: yes all you have to do is unlock the router adjustment clamp and use the supplied wrench to adjust it from the table top as there is a hole in the router base plate for bottom adjustment, then relock the router clamp
by|May 5, 2020
A: Hello Tec! Yes it is. Thanks for asking. - Eve
by|May 4, 2020
Q:Insee it comes out of the base but was wondering if there was a plung base avail.
by|Mar 29, 2020
2 Answers
Answer This Question
A: No, that's why they call it a fixed base router.
by|Jun 3, 2021
A: Hi Jfisher, Sorry but we do not make a plunge base for this model. Thanks for your interest.
by|Mar 30, 2020
Q:Will this work with the Bosch benchtop cabinet?
by|Mar 10, 2020
2 Answers
Answer This Question
A: Hi Rich, As long as the mounting holes line up with each other then it could work. Thanks for asking. Greg
by|Mar 10, 2020
A: Yes, this will work with the Bosch benchtop cabinet.
by|Mar 10, 2020
Q:I am looking for the Ridgid 300869006 edge guide assy
by|Mar 1, 2020
1 Answer
Answer This Question
A: Hi GregCampbell, For any parts you may need to get. Please call our customer service for the best options in your area. Thanks for asking. Greg
by|Mar 2, 2020
Q:Does this router have the same diameter as the older R2901 motor?
by|Feb 24, 2020
1 Answer
Answer This Question
A: Hi DougofNM, The base has the same diameter. Thanks for your interest, Greg
by|Feb 25, 2020
Q:What is the diameter of the router motor?
by|Dec 10, 2019
2 Answers
Answer This Question
A: The barrel is 3.625". Note there is a small guide pin that extends about 1/6th.
by|Dec 11, 2019
A: Hi Ocshannon, The diameter is 3-5/8", Thanks for asking. Greg
by|Dec 11, 2019
Q:does anyone know which one is better from this or dewalt? thanks in advance
by|Dec 2, 2019
2 Answers
Answer This Question
A: Hi Josh89. We will always tell you we are the better option for too many reasons to list. But the Lifetime service agreement this is eligible for is the best reason of all. Thanks for your interest. Greg
by|Dec 3, 2019
A: I personally feel the Rigid is better due to the fact they have a lifetime warranty.
by|Dec 2, 2019
Q:Where do I get guide bushings to fit this base, using 1/4 inch bits?
by|Nov 30, 2019
1 Answer
Answer This Question
A: Hi Pacer. The Home Depot sells several aftermarket versions of the guide bushings that work on this model. Thanks for asking. Greg