Questions and Answers for Rust-Oleum Professional 1 gal. High Performance Protective Enamel Gloss Black Oil-Based Interior/Exterior Industrial Paint (2-Pack)

A:  Thank you for reaching out, Steve! Rust-Oleum Professional Traffic Striping Paint can be used for large striping jobs on interior or exterior concrete or asphalt surfaces such as large commercial parking lots, curbs, or aisles. - Rust-Oleum Product Support 3

A:  Thank you for reaching out, Jack! At this time, we do not offer a clear coating in the Rust-Oleum Professional High Performance Enamel Paint. If wanting a recommendation for an industrial application, please give us a call at 800-899-1729 to talk with our industrial product team! - Rust-Oleum Product Support 3

A:  If the paint on the Jon boat will be immersed in water, Willie, we would not be able to recommend any of our products, including the Rust-Oleum High Performance Professional Interior/Exterior Paint. The concern is that the product will not hold up properly in these conditions, and would lose adhesion. - Rust-Oleum Product Support 1

A:  Try Carboline or Sherwin Williams marine epoxy.

A:  Yes you can use this product for metal doors. Pick your sheen, and colors wisely. Only about 8 or so premixed colors. Some stores have a tintable version of this same paint. Most home Depot stores don't have this, and it's a special order from most.

A:  Happy to help! Rust-Oleum Professional High-Performance Protective Enamel Paint can be applied to bare or primed steel doors. It can be used on exterior surfaces and offers weather and UV resistance! - Rust-Oleum Product Support 3

A:  Yes you can. 40 + years as a real pro painter and general contractor. Clean the brick well before applying. I'd use Ajay liquid dish soap, and a bleach and water mix. Pressure wash. Let it dry at least 1 solid day. And apply 2 coats. Spray works best.

A:  Happy to help, Arnold! Rust-Oleum Professional High-Performance Enamel Paint can be used on brick surfaces. To ensure longevity, make sure the chimney does not reach temperatures above 200°F, as this can cause the coating to blister and peel. - Rust-Oleum Product Support 3

A:  Happy to help, Mark! Yes, Rust-Oleum Professional High-Performance Protective Enamel Paint can be applied with a roller. For rougher surfaces, you will want to use a longer nap roller. - Rust-Oleum Product Support 3

A:  Happy to help, Dennis! Rust-Oleum Professional High-Performance Protective Enamel Paint can be used on exterior metal surfaces, and can be used on smaller roofs. For larger or residential roofing, please give our roofing team a call at (800) 899-1729, so we can help ensure the best product recommendation! - Rust-Oleum Product Support 3

A:  Happy to help, Jim! Rust-Oleum Professional High-Performance Enamel Paint is suitable for use over most previously painted surfaces. Make sure any loose paint is removed and that it is otherwise in good, sound condition. If the previous paint is glossy, we do recommend lightly sanding to create a surface profile. And yes, this paint can be applied with a paint sprayer. - Rust-Oleum Product Support 3

A:  yes, check the instructions on the can, I think it was acetone.

A:  We're here to help, Cameron! Yes, Rust-Oleum Professional High-Performance Enamel Paint can be thinned with acetone if necessary. For brush or roller, thinning is not normally required. For air spray, thin up to 1-½ to 2 pints per gallon. Do not thin with gasoline, lacquer thinner, turpentine, etc. For airless spray, thinning is not normally required. - Rust-Oleum Product Support 3

A:  We're happy to help. Rust-Oleum Professional High Performance Protective Enamel Brush Paint can be applied to metal surfaces, such as outdoor propane tanks. Please note, Rust-Oleum Professional can be applied to surfaces that do not exceed 200°F. -Rust-Oleum Product Support 14