Questions and Answers for HOFT End Post Kit 44 in. x 3 in. x 3 in. Black Aluminum Railing End Post and Hardware - Kit A4

A:  Hi RIchard and thanks for reaching out. Yes, you can purchase extra Post Caps. Please send us an email at info@hoftsolutions.com with your complete shipping address, telephone number and how many Caps you need, so we can then send you a Quote. Thank you Richard and please have a wonderful summer. HOFT Team.

A:  Hello Avila and thanks for reaching out. Yes, our HOFT Posts can be installed on a sloped concrete driveway, and to keep all boards levelled when the surface on which you anchor is not, you need to level the boards using the rail block. The rail block is the first part that you slide in our post system. It can be secured to any desired height and allows you to create a slight slope to compensate. If you would need to see any pictures for a better understanding, please contact us directly at info@hoftsolutions.com. Thank you once again Avila and please have a wonderful summer. HOFT Team.

A:  Hi Mike and thanks for reaching out. If you are building a 12-foot wall and using 5/4th wood boards, the maximum span between posts is 6-feet. So Yes, we suggest using 2 End Post Kits and 1 Line Post Kit. Thanks again Mike and please have a wonderful summer! HOFT Team.

A:  Hi Windy, The four screws must go all the way through top boards an into the joists underneath your deck. HOFT Team

A:  Hi John, Thanks for reaching out! Yes you can! HOFT Team

A:  Hi Jimmy, The stain used in the picture is distributed by Exterol Carver and is called Douglas. HOFT Team

A:  Hi! You must use 5/4 (exactly 1'' finished) x 6'' (exactly 5.4'' finished) x maximum 6' long in between posts. These wood deck boards are usually available pressure treated, red cedar, douglas fir, etc. HOFT Team

A:  Hi! You must use 5/4 (exactly 1'' finished) x 6'' (exactly 5.4'' finished) x maximum 6' long in between posts. These wood deck boards are usually available pressure treated, red cedar, douglas fir, etc. HOFT Team

A:  Hi Virak, End Posts have one rail on one side, corner posts have two rails on two sides (90 degrees corner posts) and line posts have two rails (180 straight line). HOFT Team

A:  Hi Mary, For sure! For optimal results, use a miter saw and a carbide blade for aluminum. Let us know if you have any other questions, Have a wonderful summer! HOFT Team