Questions and Answers for Malibu Wide Plank Tunitas French Oak 1/2 in. T x 7.5 in. W T&G Wirebrushed Engineered Hardwood Flooring (23.3 sq. ft./case) CXS

A:  Yes to a 1/2 Bath. Not recommended for full bathrooms.

A:  yes

A:  YES: RADIANT HEAT (ENGINEERED HARDWOOD FLOORING): Please follow the guidelines in the Installation Guide attached to each product listing page under "Additional Resources From the Manufacturer". Radiant Heat Systems • The radiant heat system must have been tested and in operation for a few weeks prior to installation. • The radiant heating system needs to be turned off prior to installation and the floor needs to be close to room temperature 65 to 75 degrees. If the radiant heat pipes are visible or exposed in the subfloor, you must cover them with 3/8” plywood to spread heat more evenly. • After the flooring is installed, slowly raise the temperature to the preferred comfort level (over at least a 5 day timeframe) beginning two days after installation or at the onset of colder weather conditions. • The radiant heat system must be controlled and the surface temperature of the flooring must never be allowed to exceed 85°F. • Proper relative humidity must be maintained within your home at all times during the year. For best results and to minimize seasonal gaps keep indoor humidity between 30% to 50% RH. If you are in an arid part of the USA or Canada, it is especially imperative that you use a humidifying system to maintain this moisture in the air. • Forced air heating system also can dry out the air inside your house much more than you might imagine, so use of a Relative Humidity meter(Hygrometer) is recommended to ensure you know when you must use a humidifier to keep the relative humidity above 30%. • Even when these guidelines are followed it is still possible that your flooring may experience some cracks (seasonal checking) on the plank surface and/or gapping between planks due to slight shrinkage, which are not covered by the products limited warranty.

A:  Tread would be the flooring, glued down. Riser could be the flooring or Stair Risers are usually painted white or unfinished and purchased at your local home depot store. Moldings available are internet #'s: 317220100; 317220127; 317220111; 317220171; 317220147; 317220117. For all Malibu Wide Plank Hardwood Flooring Moldings, these are provided by Roppe (https://roppe.com). ROPPE provides high quality, color coordinated hardwood moldings for most of the hardwood flooring suppliers at the Home Depot. Molding color names that coordinate with your Malibu Wide Plank floor will be a generic color name, this is due to these moldings coordinating with numerous hardwood floors vs 1 specific color. All moldings are Color Coordinated to blend with your floor, and moldings are paired with all Malibu Hardwood Floors on each product listing page under “Frequently Bought Together” or “You Might Also Need”. These will also available be available as Special Order from your local Home Depot store, have your flooring store associate using Generic Roppe SKU#629-870 under Roppe Merchandise Vendor #60012074 for Special Order. Available Coordinating Hardwood Moldings: Quarter Round – 94” length; T-Mold – 78” length; Reducer – 78” length; Threshold – 78” length; Stair Nose – 78” length. For further assistance on all Malibu Wide Plank Flooring please call our customer service department at 650-416-7300 or Home Depot Technical Services department @ 800-928-6168. Roppe Customer service # is Toll Free Number: 833-807-0042

A:  Below is a link to the installation guide. https://images.thdstatic.com/catalog/pdfImages/ba/bad54744-96f3-4393-80de-e10eed90cd85.pdf Mike

A:  Flush Stair Nose internet #317220142