0081999104689

Model 166103

Internet #100041308

Store SKU #166103

23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp

$22.98 / each
If you buy 48 or more
$20.68 / each
  • Plywood sheathing for use in construction
  • Can be used as wall and roof sheathing
  • Stiff, durable and dependable panels

Frequently Bought Together

Product Overview

Plywood sheathing is ideal for residential and light construction, and every piece meets the highest grading standards for strength and appearance. It adds proven performance and durability to new homes, room additions and renovations. Plywood sheathing delivers outstanding stiffness, strength and versatility, and is an excellent choice for light frame wall and roof assemblies in weather protected applications.

California residents: see   Proposition 65 information

  • Structural sheathing for wall, roof and floor applications
  • Long-term durability with resistance to edge swell
  • Excellent fastener holding properties
  • Versatile, provides excellent performance in a wide variety of applications
  • Ideal for residential and light construction
  • Note: Product may vary by store
  • Click to learn how to select the right lumber for your project

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

47 Questions57 Answers

Customer Questions & Answers

23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
 
5 answers

what is the weight of .75x8x4 plywood

This question is from 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
Asked by
Zachary, La
Read all my Q&A
August 31, 2015
where can I find the weight of lumber ?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
san antonio, tx
Read all my Q&A
Home Improvement Profile: DIYer
June 1, 2016
Answer: 
Calculate the weight using dimensions in inches (0.75 times 48 times 96), times 2.54 cm/in for each dimension, times density 0.6 gm/cc (wood floats 60% below water line), divide by 1000 to get kgm, multiply by 2.2 pounds/kgm, arrive at answer of approx. 66 lbs.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
San Antonio, Texas
Read all my Q&A
Home Improvement Profile: Professional
January 14, 2016
Answer: 
The weight will be proximately 61lbs.
+10points
10out of 10found this answer helpful.
Was this helpful?helpful10unhelpful0

Asked by
Waco, Texas
Read all my Q&A
September 21, 2015
Answer: 
I know the weight could vary depending on how much moisture is in the wood, but a ballpark guess for the weight of one sheet would be very helpful. I need to compute how much the total roof with shingles would weigh so I can make sure the structure and the concrete base will support it.
Could someone in a store somewhere weight one for a ballpark estimate?
Thanks,
Jim C in Waco
-14points
1out of 16found this answer helpful.
Was this helpful?helpful1unhelpful15

Asked by
Read all my Q&A
September 8, 2015
Answer: 
http://theplywood.com/weight
Just in case anyone wants to know weights for weight distribution or stress analysis in C.A.D. OR C.A.M. projects, also @cj13...Dude, if you don't know the answer to the question why did you try to answer it ? Not very helpful if you supply the wrong data.
-5points
12out of 29found this answer helpful.
Was this helpful?helpful12unhelpful17

Asked by
Chicopee Mass
Read all my Q&A
Home Improvement Profile: Professional
September 7, 2015
Answer: 
I have no idea how much each 4x8x3/4 sheet weighs. I'd only be guessing,… maybe between 40 to 50 pounds?
-44points
1out of 46found this answer helpful.
Was this helpful?helpful1unhelpful45
This question is from 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
 
4 answers

how many board feet is in 1 piece of this plywood?

This question is from 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
Asked by
Read all my Q&A
January 30, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Dauphin, PA
Read all my Q&A
Home Improvement Profile: Professional
October 19, 2015
Answer: 
I guess you just pick the answer you like best huh ..... a board foot = 1 foot X 1 foot X 1" thick. since this plywood is only 3/4" thick that makes a difference. And yes plywood isn't usually measured by board feet, but by square feet (4 X 8 = 32 square feet). If you wanted to know board feet it would be 4 X 8 X 3/4"( or .75) = 32 X .75 = 24 board feet. Usually sawmill lumber (rough cut) is sold by the Read More
I guess you just pick the answer you like best huh ..... a board foot = 1 foot X 1 foot X 1" thick. since this plywood is only 3/4" thick that makes a difference. And yes plywood isn't usually measured by board feet, but by square feet (4 X 8 = 32 square feet). If you wanted to know board feet it would be 4 X 8 X 3/4"( or .75) = 32 X .75 = 24 board feet. Usually sawmill lumber (rough cut) is sold by the board foot. some examples are 1" thick X 12" wide X 10' long = 10 board feet .......... 1" thick X 8 wide X 10' = (1 X 8 = 2/3 of a foot width times 10' long = 2/3 (.66667) X 10' = 6.6667 board feet......... 1-1/2" thick X 8" wide X 10' = 1-1/2 X 8" (2/3 of a foot width) - times 10' long = 1.5 X .6667 X 10' = 10.0005 etc You can use the formula for any board if you convert the inches to decimals (thickness and width) times number of feet. Read Less
+16points
16out of 16found this answer helpful.
Was this helpful?helpful16unhelpful0

Asked by
Delaware
Read all my Q&A
Home Improvement Profile: Professional
August 6, 2015
Answer: 
L" x W" x T" / 144, where T is rounded up to 1", = 32 board feet
-7points
3out of 13found this answer helpful.
Was this helpful?helpful3unhelpful10

Asked by
Texas
Read all my Q&A
Home Improvement Profile: Professional
March 1, 2015
Answer: 
Plywood is not rated in board feet...it is square surface feet. Board feet applies to solid hardwoods. A 4 x 8 sheet of plywood has 32 square feet of surface.
+16points
17out of 18found this answer helpful.
Was this helpful?helpful17unhelpful1

February 20, 2015
Answer: 
A full sheet of plywood is 48 board feet.
-45points
3out of 51found this answer helpful.
Was this helpful?helpful3unhelpful48
This question is from 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
 
4 answers

What does RTD mean

This question is from 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
Asked by
Carrabelle
Read all my Q&A
November 15, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Grand Haven, Michigan
Read all my Q&A
Home Improvement Profile: Professional
May 17, 2016
Answer: 
http://www.conaxtechnologies.com/case_rtd_plywood.aspx
Application Case Studies
IN-PROCESS RTD SENSOR REDUCES DELAMINATION OF PLYWOOD
Industry: Wood Manufacture
Application: Monitor steam feed heater plates on a plywood press.
Customer Requirement:
The customer was using hand-held infra-red sensors to monitor the 31 heater plates on a plywood press. The need to perform periodic manual
Read More
http://www.conaxtechnologies.com/case_rtd_plywood.aspx
Application Case Studies
IN-PROCESS RTD SENSOR REDUCES DELAMINATION OF PLYWOOD
Industry: Wood Manufacture
Application: Monitor steam feed heater plates on a plywood press.
Customer Requirement:
The customer was using hand-held infra-red sensors to monitor the 31 heater plates on a plywood press. The need to perform periodic manual temperature checks caused substantial down time. They wanted to replace the hand-held sensors with a more accurate, efficient and continuous method to monitor the temperature of the press plates used in the bonding of the plywood.
Conax Design Solution:
A Conax RTD34W3-SS25-B3-PG2BV-3.00" with a 0.25" x 0.50" NPT hex bushing was installed in the steam line that feeds into the press plates. Each RTD is connected to an operator alarm and data logger for quality control of the process.
The use of the in-process RTD sensors significantly reduced the delamination caused by insufficient heating of the plywood during the press cycle. If the plywood sheet is found to have delaminated areas, it is sold as a lower grade plywood at a reduced market value. Each press handles 30 sheets of plywood per two-minute press cycle, so the reduction in delamination has significant economic impact. Read Less
+1point
4out of 7found this answer helpful.
Was this helpful?helpful4unhelpful3

Asked by
Read all my Q&A
May 9, 2016
Answer: 
The product description says "RTD SHEATHING SYP", this means this board is RATED SHEATHING SOUTHERN YELLOW PINE. It has NOTHING to do with how the board is made. People sure are gullible these days!
-7points
4out of 15found this answer helpful.
Was this helpful?helpful4unhelpful11

Asked by
Elko, NV
Read all my Q&A
Home Improvement Profile: DIYer
December 18, 2014
Answer: 
RTD refers to the method used to manufacture the plywood. This is, essentially, next generation CDX plywood which is manufactured with a quality control system using RTDs (Resistance Temperature Detectors) to maintain correct temperature during the bonding process. This process helps ensure complete bonding of the layers to minimize delamination.
+79points
82out of 85found this answer helpful.
Was this helpful?helpful82unhelpful3

Asked by
Philadelphia PA
Read all my Q&A
December 13, 2014
Answer: 
It means its APA rated rated=RTD that is all it means
-41points
7out of 55found this answer helpful.
Was this helpful?helpful7unhelpful48
This question is from 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
 
3 answers

can this product be used as a shed floor within 4 to 6 inches from the ground?

This question is from 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp
Asked by
Michigan
Read all my Q&A
March 24, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Chicopee Mass
Read all my Q&A
Home Improvement Profile: DIYer
August 19, 2016
Answer: 
You should use pressure treated plywood, (or PT) for a shed floor. It resists rotting. If your storing a lot of heavy stuff like a riding mower, snow blower, etc. I would use 3/4 inch pressure treated.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 31, 2015
Answer: 
Yes, this product can be used as flooring for a shed.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
Mesa AZ
Read all my Q&A
Home Improvement Profile: DIYer
March 25, 2015
Answer: 
It could, however that being said, it wouldn't be a permanent flooring, as the nature of wood is to decompose with time. So, the short answer is YES. But realize that in a few years' time, the elements would get to the wood and make it weak. You would eventually have to replace it. Just realize that from the start and judge accordingly. Remember, this is raw wood, not cedar or hardwood and is meant to be Read More
It could, however that being said, it wouldn't be a permanent flooring, as the nature of wood is to decompose with time. So, the short answer is YES. But realize that in a few years' time, the elements would get to the wood and make it weak. You would eventually have to replace it. Just realize that from the start and judge accordingly. Remember, this is raw wood, not cedar or hardwood and is meant to be covered by additional flooring such as tile or sheet vinyl or carpeting. It is not meant to withstand the elements by itself. Even with a metal "shed" or the like surrounding it and if it were up on top of a series of floor joists, if there is any way for moisture or heat or cold to access this flooring, it's going to need to be replaced in a few years time, for safety, more than likely. It's wood, not a concrete slab. Read Less
+5points
7out of 9found this answer helpful.
Was this helpful?helpful7unhelpful2
2 3 4 »
  • 2016-09-08 T12:18:07.276-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100041308, prod, sort_default
2 3 4 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 110ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.7 out of 5 by 15 reviewers.
Rated 4.0 out of 5.0 by Serves My Purpose So I bought this plywood to make a 130 gallon fish tank and aquaponic set up. It was chosen for its price. And in the store it was laying nice and flat on the cart. So I got 4 sheets and had the store employee cut them according to my cut list. Since he said it cost 25 cents a cut, I only had each 4x8 sheet cut down once or twice to get the material home on top of my Camry. The guy was off a half inch on one cut. But I could live it. The plywood itself is rated for sheathing. At not quite 3/4 of an inch it remained 97% flat for the installation. The only slight negative is that it had more knot holes and grooves than I realized at first look. Since I wasn't making furniture that wasn't a problem. But I did take the precaution of using auto body filler to fill the knot holes and grooves to ensure its strength against the weight of water. All in all It worked for my purposes and would use it again. September 30, 2015
Rated 1.0 out of 5.0 by Warped plywood Badly warped. May return if they continue to curl before we cut them. November 4, 2014
Rated 3.0 out of 5.0 by More Specifications required The specification for this product is missing some important information. The listing does not indicate the face panel rating (A-B-C-D). Does not indicate the Exposure rating or glue rating. Does not indicate the APA Panel index number...Attn: The Inspector can reject your work if the APA Panel Index number does not match what is specified on your approved plans! Please provide minimum technical information. October 5, 2015
Rated 1.0 out of 5.0 by wrong ' RATED' means " Return To Depot"... you get what you pay for April 23, 2015
Rated 5.0 out of 5.0 by Good boards I haven't actually used the boards yet, but they are quality, and straight and true, and thick and solid! What more could you ask of a flooring board? The checkout was a breeze and everything was as expected. I expect more from Home Depot and they ALWAYS COME THROUGH WITH FLYING COLORS! March 3, 2015
Rated 2.0 out of 5.0 by Warped Wood wood is extremely warped...had to lay flat with weight on them to make straight. January 6, 2015
Rated 5.0 out of 5.0 by Used product for shelving with great success. Actually am planning on buying same again for another shelf section I need. Requested sheet be ripped into 2- 2 x 8 pieces and store personnel did so right on the mark. I'm very satisfied with Home Depot both from a product quality & personnel service perspective. I don't shop anywhere else for home improvement items even though we have both a Lowes & Menards within 10 miles from us. March 25, 2014
Rated 5.0 out of 5.0 by RTD Thickness is great for floor/platform purposes. RTD refers to the method used to manufacture the plywood. This is, essentially, next generation CDX plywood which is manufactured with a quality control system using RTDs (Resistance Temperature Detectors) to maintain correct temperature during the bonding process. This process helps ensure complete bonding of the layers to minimize delamination. December 11, 2012
  • 2016-09-08 T12:50:55.267-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_15, tr_15
  • loc_en_US, sid_100041308, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 61ms
  • REVIEWS, PRODUCT