Model # 564-1200HC

Internet #100534625

Store SKU #301329

null 3/4 in. x 10 ft. Galvanized Steel Pipe

3/4 in. x 10 ft. Galvanized Steel Pipe

  • Steel-constructed pipe is zinc-coated for corrosion resistance
  • Rated at maximum 300 psi at 350 degrees F
  • Backed by a 1-year limited manufacturer warranty
$1977 /each

Frequently Bought Together

Product Overview

Use the Mueller Streamline 3/4 in. x 10 ft. Galvanized Steel Pipe for residential potable water and drainage applications. It is coated with zinc to reduce corrosion.

  • Constructed of galvanized steel
  • Zinc coated to reduce corrosion
  • Male threaded connection
  • Threaded ends meet ANSI B1.20.1 standards
  • Complies with ANSI and ASTM A733, A53 standards
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Will this pipe rust if outside?

If we use this for an outside deck railing, will it rust?
Asked by: Key
Anywhere the galvanizing missing, like the threads or any nicks, scrapes or pipe wrench marks it will rust. You can paint it with a galvanize spray paint or something like Rustoleum.
Answered by: RobertL
Date published: 2017-01-23

can you bend this pipe?

Asked by: Gogators
No it's not meant to be bent that's what fittings are for.
Answered by: RobertL
Date published: 2017-01-23

Can you cut and thread custom lengths of 3/4 in galvanized pipe?

We are designing a shelving system that uses 3/4 in galvanized pipe as supports. We will need custom lengths (14", 16", etc.) threaded on both ends. Can you do this?
Asked by: smartmac
Hello smartmac, Pipe cutting and threading service is available within the vast majority of our stores. The plumbing department where the pipe is sold will also commonly have a pipe threader. If you require a large number of cuts/threading I recommend calling your local store first and setting up a time to stop by as threading takes quite a bit of time. Cheers, Chris
Answered by: ChrisFixit
Date published: 2016-06-10

What are nipples on the pipe? What is their importance? Why are they cut off the pipe?

What are nipples on the pipe? What is their importance? Why are they cut off the pipe?
Asked by: bk
I don't know if I understand your question correctly but nipples are small lengths of black iron or in this case galvanized pipe typically 1/2" - 12" long. Nipples are used to make small runs. This pipe/product is sold in 10' sticks and threaded on both ends of the pipe. It is meant to be joined together with fittings. Threads are the only way to join pipe together besides welding. If you need a shorter piece of pipe the home depot store can cut and rethread to your specific lengths. I apologize if I misunderstood your question and this helps clears some things up.
Answered by: KsCaveman
Date published: 2017-04-15
  • y_2017, m_5, d_24, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_, sid_100534625, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 82ms

Customer Reviews

3/4 in. x 10 ft. Galvanized Steel Pipe is rated 2.6 out of 5 by 9.
Rated 4 out of 5 by from Pipe is fine. The .87" od is either 1/2" steel pipe or 3/4" copper. Any pipe or fitting with male... Pipe is fine. The .87" od is either 1/2" steel pipe or 3/4" copper. Any pipe or fitting with male threads is going to get banged up if they don't have some type of protection on them. Visually inspect the threads at the store. If male threads are messed up a little a small fine file will quickly remedy the situation. I gave 4 stars because it isn't made in America.
Date published: 2017-01-23
Rated 1 out of 5 by from I tried to buy thirty 2" by 10 foot pipes for a small project I am working on. Before I left the... I tried to buy thirty 2" by 10 foot pipes for a small project I am working on. Before I left the store I decided to prethread a half dozen fittings. NONE THREADED ON ANY OF THE 30 PIPEs. Then I reconfigured for sixty-two1.25" pipe, tested fittings NONE THREADED ON THE PIPES, then I said well third times a charm I will just use one hundred and twenty 3/4" pipes...Yep, NONE OF THE FITTINGS THREADED ON THE PIPES CORRECTLY. I live in the US where we have mountains of steel and coal and these junk pipes come from outside of the country, the FITTINGS come from a different country from the pipes, none of the pipes are standard, none of the fittings are standard and the BUYER at Home Depot didn't check to find this out. Went across the street to L's and in ten minutes had everything I needed working perfectly at a slightly lower price.
Date published: 2016-12-09
Rated 5 out of 5 by from Check your dimensions, these are just fine To those who say this is out of spec: 3/4" schedule 40 pipe spec says outside diameter of 1.05", which these are. The spec's on this page are mislabeled. But, they're only sold in-store, so it's not like you are buying blind. Go into the store and measure them, they meet specs. Bought them for use with pipe clamp ends, and they work great, no issues at all.
Date published: 2014-04-29
Rated 1 out of 5 by from It is NOT .87 OD! I bought this galvanized pipe to erect a small two-way radio antenna above our barn. The adapter on the base of the mounting bracket is for 1" or smaller pipe. The Home Depot spec said .87" so we thought we were good. Checked their inventory and they had it in stock. Drove to town and bought it and brought it back out to our farm. The .87 outside diameter was too wide for the bracket to fit on it. Measured it and it was over 1". A 20 mile trip back to Home Depot with the bracket in hand resulted in them not having any 10' pipe in the actual diameter we needed. Hey, Home Depot! Please fix your specs on your website! Not all of us live right down the street from a Home Depot. Guess I should have read the reviews before I bought it, but I thought, "Who in the heck would write a review on galvanized pipe?" Now I know.
Date published: 2015-06-15
Rated 4 out of 5 by from Correct Outer Diameter Specs for 3/4 inch steel pipe call for 1.050 inch OD. This pipe falls within that specification. I think Bill is getting 3/4 inch copper tube (7/8" OD) and steel pipe mixed up. Don't worry about the OD.
Date published: 2013-06-03
Rated 1 out of 5 by from Returning due to wrong specs. The specs say 0.87 OD but it's much bigger and heavier. These pipes will not couple with any of my other 5-foot sections or fittings. The photos also show the ends are not threaded, but in fact they are—and the threads came all rusty. Also note that if you plan to install these pipes in any visible area, they are covered with black printing like "MADE IN SOUTH AFRICA". Not exactly something I want visible on my patio when used to conceal my security camera cables. I decided to use the much cleaner, thinner and lighter 5-foot sections from Home Depot instead. Too bad those don't come in 8-foot lengths—then I wouldn't have to couple them or cut them for my application.
Date published: 2015-12-27
Rated 5 out of 5 by from No problems with this product I concur this piping is fine, I'm an amateur and the specs worked fine for me
Date published: 2013-11-24
Rated 1 out of 5 by from Wrong Outside Diameter The specs say .87 in. outside diameter. It is closer to 1 1/16". Just in case you're using it for its O.D. Quality of product is good.
Date published: 2013-05-16
  • y_2017, m_5, d_25, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_100534625, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 110ms