Model # 88001

Internet #100129649

Store SKU #250914

BEHR Premium 1 gal. Concrete & Masonry Bonding Primer
0082474880012

BEHR Premium

1 gal. Concrete & Masonry Bonding Primer

  • Provides a uniform sound finish for all floor paints and stains
  • Epoxy fortified primer
  • Dries clear
$19.98 /each

Frequently Bought Together

Product Overview

The BEHR PREMIUM 1-Gallon Concrete and Masonry Bonding Primer is a high-performance, ready-to-use pre-treatment for porous concrete. This high-performance water-based primer will promote a uniform topcoat finish and create a stronger adhesion between the coating and surface.

California residents: see   Proposition 65 information

  • Ideal for interior/exterior horizontal concrete, masonry, stucco, cinder block, brick and any other porous stone
  • Ready-to-use pre-treatment for porous concrete
  • For the best results, be sure to properly prepare the surface using other applicable preparation products as described in the label instructions
  • Apply using a high quality pump sprayer, 1/4" - 3/8" nap roller, nylon/polyester brush or a pad applicator
  • Water-based formula promotes the adhesion of paints and stains to concrete
  • 350 - 500 sq. ft. of coverage per-gal
  • Cleans with paint thinner
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes a Paint Care fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI and VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Will this work on a untreated bare concrete interior wall as a primer for finish paint so it will...

Will this work on a untreated bare concrete interior wall as a primer for finish paint so it will adhere better? Thank you.
Asked by: Nick
Hello Nick, Our Bonding Primer is only designed to be used for bare concrete horizontal surfaces and we would not recommend it on vertical surfaces. Best regards, Kevin
Answered by: Behr
Date published: 2017-04-18

can this be colored and used as finish coat?

can this be colored and used as finish coat?
Asked by: spagehetti
I doubt it. The whole reason you put it down is to help paint/coating stick to the primered area. So it would probably attract dirt and the dirt would adhere to it. Also it is probably not going to wear well since it is made to be covered.
Answered by: Mikesters
Date published: 2017-04-13

Can I use this on a concrete garage floor? 2-part epoxy coating?

Can I use this on my prepped concrete garage floor? I will be finishing it with Epoxyshield. Will this work under a 2-part epoxy coating? Thanks.
Asked by: ThandyMan
I do not think that would be a good idea. I mean, you COULD use it, but the garage floor coating is designed to go onto bare prepared concrete, right? I would be more comfortable using it as intended. This primer could be a weak link between the concrete and the topcoat.
Answered by: Lightning1
Date published: 2016-07-26

Can this be used as a primer for a brick fireplace?

Can this be used as a primer for a brick fireplace?
Asked by: RonC
Hi RonC, Thanks for writing in with your question. We do not recommend our Concrete and Masonry Bonding Primer, (No. 880) on vertical surfaces. This bonding primer is designed to be used with some of our floor coatings. You can use our Multi-Surface Primer and Sealer, (No. 436) instead. Good luck with your project! Regards, Giovanna
Answered by: Behr
Date published: 2017-03-07
  • y_2017, m_4, d_24, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_112
  • loc_, sid_100129649, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 20ms
  • QUESTIONS, PRODUCT

Customer Reviews

1 gal. Concrete & Masonry Bonding Primer is rated 4.4 out of 5 by 68.
Rated 5 out of 5 by from I have been using this product over 10 years when preparing to finish coat concrete. Hands down ... I have been using this product over 10 years when preparing to finish coat concrete. Hands down Behr's products are top notch and whenever I walk away from a clients home, I am well assured the quality will stay up to par.
Date published: 2017-02-01
Rated 5 out of 5 by from went on easily and covered well...we did apply two coats for a smoother finish now the test of ti... went on easily and covered well...we did apply two coats for a smoother finish now the test of time for durability?
Date published: 2017-02-15
Rated 1 out of 5 by from Didn't do the job We used this primer under the Epoxy paint for a cement floor that is outdoors and covered by decking on a floor above. All instructions were followed, including roughing up the previous stained floor before applying the primer followed by the epoxy paint. The drying time instructions were all followed. However, a week or so later, it rained and the paint and primer immediately started bubbling up and popping off. You can clearly see the old stain color below (which was also a Home Depot product). So disappointed that all this time and money was spent on a project that looks worse after one week than it did before we started. Would not recommend either of these products to anyone.
Date published: 2016-07-27
Rated 1 out of 5 by from This was my second chance I had given to Behr Products, my first was with the Marquee paint that ... This was my second chance I had given to Behr Products, my first was with the Marquee paint that peeled off the wall after two weeks. I followed the instructions of the Primer to the letter. With the floor properly cleaned, etched and water drop test conducted, I rolled the primer onto the concrete, basement floor, with a 3/8 inch nap roller. I let it dry over night and when I walked on it to prep for the Behr Epoxy, the primer was peeling off onto my feet. I reached out to the Behr 1-800 number and spoke with Emanuel . I explained what was going on and of course I was told that it was user error. I was told I should not be walking on it. My question to Emanuel was "how do I paint the Epoxy on the floor, if I can't walk on it"? That quickly changed back to, user error again. I asked for help on how to get the primer off of the floor. Emanuel suggested I pressure wash my basement floor. I explained to him that I would die if I did that. Gas engines are very hazardous indoors! Next, he suggested, "if the floor is peeling that easily, I could sit and peel it off". That seemed a little tedious for 250 Sq feet of floor. In the end, I ended the conversation, because Behr was of no help. Again, this was my SECOND problem with a Behr Paint Product Peeling, I urge you to stay away from all of their products, nothing sticks, even with proper prep and they will say, user error.
Date published: 2016-11-03
Rated 5 out of 5 by from Covered a patio floor with Behr Bonding Primer before applying Behr Granite Grip paint. Power was... Covered a patio floor with Behr Bonding Primer before applying Behr Granite Grip paint. Power washed and acid washed surface before applying bonding primer. Time will tell how well the paint sticks.
Date published: 2017-03-28
Rated 5 out of 5 by from we loved using this product - perfect to use for basement prior to adding your basement floor pai... we loved using this product - perfect to use for basement prior to adding your basement floor paint..
Date published: 2017-03-14
Rated 5 out of 5 by from Perfect bond. This was a perfect bond for the floor paint I used in the basement.
Date published: 2016-11-09
Rated 5 out of 5 by from I rolled on the primer on Monday and then applied the concrete stain on Tuesday. The stain went ... I rolled on the primer on Monday and then applied the concrete stain on Tuesday. The stain went on smoothly and easily due to the primer creating a bottom coat for the stain to cling to without just being "sucked into" the concrete. The primer went further than I expected so I had a bit left over; I had been worried I might run out but was pleasantly surprised at how well it went on and covered well. It is too early to say if the primer will help the stain last longer than it would have if I had omitted the primer step. It was recommended in the written instructions so I went with it to do the best job possible.
Date published: 2017-04-18
  • y_2017, m_4, d_24, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_68
  • loc_, sid_100129649, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 99ms
  • REVIEWS, PRODUCT