Model # 3/4 M 10

Internet #100354200

Store SKU #148520

Cerro 3/4 in. x 10 ft. Copper Type M Hard Temper Straight Pipe
0662386010679

Cerro

3/4 in. x 10 ft. Copper Type M Hard Temper Straight Pipe

  • Rated at maximum 701 psi at 150 degrees F
  • Hard temper ASTM-B88 copper is NSF and ANSI Standard 61 certified
  • Backed by a 1-year limited manufacturer warranty
$20.45 / each
If you buy 15 or more
$17.38 / each

Frequently Bought Together

Product Overview

Ideal for a variety of plumbing and heating purposes, the 3/4 in. x 10 ft. Copper Type M Hard Temper Straight Pipe is strong and durable. It not only meets industry standards, but is also NSF and ANSI Standard 61 certified.

  • Constructed of hard temper ASTM - B88 copper
  • For general plumbing and heating uses
  • Alloy C12200 (DHP) meets industry standards and is NSF and ANSI standard 61 certified
  • Meets or exceeds industry standards to deliver high quality flow products
  • Plumbing and mechanical codes govern what types of products may be used for applications; local codes should always be consulted for minimum requirements
  • Note: product may vary by store

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

can you use this in air conditioning line hook up

Asked by: boxxcarr
Yes
Answered by: websearcher
Date published: 2016-12-30

what types of pipes are recommended for gas heating

Asked by: help
Steel is the best for gas,especially in earthquake prone areas. It's better to have a threaded pipe than have a copper pipe that is soldered or compression fitted for a gas line.
Answered by: websearcher
Date published: 2016-12-31

Where is this copper pipe made?

Where is this copper pipe made?
Asked by: Jazzman
Made by Alaskan Copper, also imported from China and India
Answered by: websearcher
Date published: 2017-03-04

Is it safe to be burnt? I am trying to use it to make a heat exchanger for a fire place.

Is it safe to be burnt? I am trying to use it to make a heat exchanger for a fire place.
Asked by: ray
I don't think it's advisable, to make a heat ex-changer with copper pipes.
Answered by: websearcher
Date published: 2016-12-30
  • y_2017, m_6, d_23, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_, sid_100354200, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 94ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/4 in. x 10 ft. Copper Type M Hard Temper Straight Pipe is rated 4.3 out of 5 by 7.
Rated 5 out of 5 by from Maybe you can tell from our reviews that we rebuild houses? If you do that or even if you are jus... Maybe you can tell from our reviews that we rebuild houses? If you do that or even if you are just fixing yours, you will need copper pipe from time to time and this item is exactly that. Always in stock and always of high quality. Buy it, use it and feel good about what you have done.
Date published: 2017-06-20
Rated 5 out of 5 by from Great stuff... Great stuff
Date published: 2017-02-07
Rated 5 out of 5 by from Excellent product,especially the solder adhered well , I was very happy with the out come. Excellent product,especially the solder adhered well , I was very happy with the out come.
Date published: 2016-11-09
Rated 1 out of 5 by from Chinese Garbage!! Do not waste your money. Made the mistake of buying a couple hundred feet of 3/4" for a large job. The pipe was obviously manufactured out of spec because it is too big for my fittings. And no, it's not the fittings. I have a large supply of fittings from several sources and none of them fit properly. My cutter is sharp and I tighten it slowly. I've had to use a dead blow hammer to drive many of the fittings onto the pipe. I've tried filing the cut end, even put one piece on my bench grinder to actually put a taper on the cut end....once the coupling got past the taper it froze up. I put up with this for a couple of days until I needed to use a slip coupling. I was able to get the coupling onto one pipe but was unable to slip it back over the other pipe...it was locked up so tight I had to cut it off and redo a larger section as a result. Done with this garbage pipe..it's going back to HD today. This Chinese garbage has cost me more in rework and lost time than I gained by buying low-cost cheap pipe. My suggestion to anyone buying pipe from HD: take a hand full of your fittings to the store and see if they fit before buying the pipe.
Date published: 2015-11-09
Rated 4 out of 5 by from Did the job Copper pipe for water system worked great. No damage due to improper storage (i.e. not dented.).
Date published: 2013-02-05
Rated 5 out of 5 by from As expected / Go Copper! Not rocket science - just copper pipe. Works perfectly, stored in standup bins which keeps damage to minimum. Very consistent over hundreds of pieces.
Date published: 2013-09-21
Rated 5 out of 5 by from Good Value The pipe is straight, meets manufacturer specs and well made.
Date published: 2015-02-10
  • y_2017, m_6, d_22, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_, sid_100354200, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms
  • REVIEWS, PRODUCT