Model # 4031345EB

Internet #203672412

Store SKU #225374

Everbilt 3 in. Threaded Stem with Brake Non-Marking Rubber Caster
0074523203132

Everbilt

3 in. Threaded Stem with Brake Non-Marking Rubber Caster

$697 /each

Frequently Bought Together

Product Overview

3 in. Threaded stem with brake, non-marking, and rubber caster is designed for everyday residential use as well as use in labs, hospitals, food service, and other institutional applications. The non-marking rubber provides a tough, yet soft ride, withstanding chemical, solvent exposure, and more.

California residents: see   Proposition 65 information

  • This caster is designed for everyday use
  • May be used on any surface including carpet, concrete, tile, and wood
  • Withstands chemicals and solvent exposures
  • Non-marking rubber provides a tough yet soft ride
  • Weight rating for single caster: 110 lbs.
  • This caster can also be used in labs, hospitals, food service, and other institutional applications

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

What is the thread size on this caster?

Asked by: JHenry
3/8-16
Answered by: BulkSoapCompany
Date published: 2016-10-24

Does this caster swivel?

Does this caster swivel?
Asked by: Laurie
It is designed to swivel, but this feature fails when under even a 50 pound per wheel load. My installation was very careful and level and yet still turns out to be a failure.
Answered by: weekendwarrior
Date published: 2017-03-21

What does this caster screw into?

I want to mount it on a movable, wood work surface that sits on a non level floor, so I want to be able to adjust the length of the stem.
Asked by: Billybob
It will screw into any 3/8-16 female threaded port or fastener.
Answered by: BulkSoapCompany
Date published: 2016-08-21

How long is the stem?

How long is the stem?
Asked by: Son
  • y_2017, m_6, d_21, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_203672412, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 154ms
  • QUESTIONS, PRODUCT

Customer Reviews

3 in. Threaded Stem with Brake Non-Marking Rubber Caster is rated 3.0 out of 5 by 4.
Rated 1 out of 5 by from They seem perfect until you install them. First the good: The claim of non-marking seems true. ... They seem perfect until you install them. First the good: The claim of non-marking seems true. Also, the lock/brake actually locks the wheel in a firm, secure way unlike some competitors. Now for a very annoying con: They won't swivel when there's weight on them. I have 4 of them holding about 200 pounds, installed carefully on a level cabinet/workbench bottom. Because of this they skid when unlocked because they won't steer, unless I bend over and steer each wheel manually at each direction change. This happens on a very flat, smooth concrete floor where every competing swivel-caster steers and rolls as designed. Very aggravating; does not meet my expectations. I'll likely return them.
Date published: 2017-02-05
Rated 5 out of 5 by from Huge Improvement The Everbilt Medium Duty Threaded Stem Caster with Brake are a huge improvement over the 3" caster I have been using. The racks these are on consistently carry 300-450 pounds. It takes two people to roll the racks with the other casters. With these casters, one person can easily maneuver a fully loaded rack over the concrete floor. I am seriously considering replacing all of the existing casters. Highly recommended.
Date published: 2015-07-16
Rated 1 out of 5 by from Poor quality I used my cordless drill to tighten these caster wheel shaft on my stationary sander and the shafts completely bent. I'm assuming the shafts are made out of a very cheap metal there is no way in the world my cordless drill is that strong to where it would bend this shaft. It only happened to two of the four. I am assuming the shafts were not hardened steel. The sander only weighs about 100 pounds with four wheels that would be 25 pound per wheel. I guess I will take them back and buy the orange ones.
Date published: 2014-12-31
Rated 5 out of 5 by from Good quality wheel I have these wheels supporting two big work benches I made. The brakes are high quality - I sit at these work benches all the time and do lots of strenuous work on the benches, and these wheels don't budge. I also really like the non-marking rubber on the wheel itself. It's great because I have one of those fancy textured epoxy garage floors and the wheels haven't given me any trouble with scuffing.
Date published: 2016-05-27
  • y_2017, m_6, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_203672412, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 166ms
  • REVIEWS, PRODUCT