Rated 3.3 out of 5 by 15
Rated 5.0 out of 5.0 by Efmiii1962 Excellent panel for the job
It installed easily and so far has performed well.
October 11, 2016
Rated 3.0 out of 5.0 by Sleck50 Will Not Work for Top Feed or Wires Smaller than #6
Watch out with this one. If you have bottom input and output and wire larger than #6 then you will have no problems. Note that most installations fall in this category.
If you have top input or output or #8 wire, as many older spas have, then you are in trouble.
The lugs on this unit take a minimum #6 wire. My existing #8 wire was too small.
There is a hole for a top hub. I could not find this hub at Home Depot, Lowes or Electrical supply . The screw spacing on the hub hole is unusual. If you find a hub that fits then you have to use expensive reducing fittings to get down to 1" or 3/4" conduit.
April 20, 2016
Rated 1.0 out of 5.0 by Moose Check that you have the parts and the nstructions not clear either
I think everyone can relate to the work it takes to install one of these. Attach conduit, run the cable, cut it to length, connect from panel, test it out, then attach your Spa...and..and..where is the screw and harness to attach the neutral. No where to be found... Hmm....
I'd open the box to ensure all piece are intact. My box was completely sealed and gave me no reason to validate.
August 17, 2015
Rated 1.0 out of 5.0 by Badfish Defective Breaker Buyer Beware
Installed disco panel and breaker for spa this weekend. The GFI breaker is defective out of the box. I was able to determine this was the case by using a non-GFI breaker to test the connection. New breaker at HD is $99 (more than the cost of panel). I discovered that this is a common occurrence according to the reviews posted on HD for the 50 amp GFI disco. I have contacted a GE Rep and now awaiting a response while I have a useless spa filled. Would really appreciate a rapid resolution.
April 27, 2015
Rated 1.0 out of 5.0 by adrian poor product
GFCI bad. had to return just the GFCI. Price is decent. not all stores carry this
July 7, 2015
Rated 1.0 out of 5.0 by anotherproject GFCI failed after a couple months
Was easy to install and had the 60 amp GFCI I needed for my hot tub. Thought it was a good buy but the breaker went bad after a couple months of use. Should last a lot longer than that.
March 22, 2015
Rated 5.0 out of 5.0 by RJGAtlanta A Fine Spa Panel
This spa panel contains a GE GFCI breaker. The panel itself was made by Midwest. It looks and feels similar to the panel I was replacing made entirely by GE. Overall, a good value.
December 13, 2014
Rated 5.0 out of 5.0 by wadep Installed a few years ago and has been working great
This was easy to install, works well, and was affordable. So affordable I have to wonder how they do it. I can't even find a GFCI 60 amp double pole breaker replacement for less money. I was having an issue with random tripping happening on my hot tub and wanted to swap the breaker, but buying a brand new one of these is somehow cheaper.
November 27, 2014