Model # 8265-s

Internet #100189012

Store SKU #112220

J-B Weld Weld

J-B Weld


  • Bonds in minutes
  • Works on multiple surfaces
  • Sets and cures in a matter of minutes
$567 /each

Frequently Bought Together

Product Overview

The J-B Weld Company 2-Piece Cold Weld Epoxy Set contains 1 fl. oz. of steel-reinforced epoxy and 1 fl. oz. of hardener. This versatile cold weld set can help repair everything from damaged welds and solders to precious heirlooms.

  • Versatile epoxy works well on cinderblock, concrete, tile, brick, metal, glass, woodwork and other surfaces
  • Use as an adhesive, laminate, plug, filler, sealant and electrical insulator
  • Includes 1 fl. oz. of steel-reinforced epoxy and 1 fl. oz. of hardener
  • Non-toxic
  • 4-minute set time and 15-hour cure time
  • Waterproof, petroleum resistant, chemical resistant, and acid resistant
  • Resists shock, vibration, and extreme temperature fluctuations and withstands temperatures up to 500 degrees
  • 3,960 psi tensile strength
  • 10,733 psi compressive strength
  • 7,320 psi flexural strength

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Does the glue work on metals?

I may purchase it to stick magnets to a hamster wheel (for science project)
Asked by: Dartagnan
Answered by: Gasoline
Date published: 2016-11-09

Will this seal a crack in ceramic or porcelain sink?

Asked by: vc
Answered by: Sebastian
Date published: 2017-01-13

is this paintable?

Asked by: nycpro
Answered by: BIGMAN
Date published: 2016-12-28

Can it be sanded?

I need to better match a wrought iron railing that had a piece added. The two pieces don't match up perfectly. Can this product be used and smoothed by sanding to make the transition more seamless between the old and new metal?
Asked by: SJF
Yes. It can be sanded, bored, etc.
Answered by: Gasoline
Date published: 2016-11-09
  • y_2017, m_5, d_19, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_37
  • loc_, sid_100189012, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 85ms

Customer Reviews

Weld is rated 4.3 out of 5 by 20.
Rated 5 out of 5 by from C'mon, it's JB Weld. What's not to like? I bought this, and a lot of it, for a project that was metal to metal to wood and therefore couldn't be welded for fear of fire. I used the JB Weld for the metal to metal portion of the project instead of any cheaper or unknown substitute because this was getting buried into a floor and would be very expensive to repair if there were a failure. The stuff has proven itself since before Paul Harvey advertised it, so you know it has longevity. Cheap knock-off's had no place on this project.
Date published: 2017-05-08
Rated 5 out of 5 by from Works well! Used it to adhere the metal lip of a Butler Creek 10/22 magazine, since there was slight movement which caused misfeeds. Did the trick.
Date published: 2017-04-25
Rated 5 out of 5 by from Fixed a hole in the side wall of my garbade disposal. I came here to find tips on fixing a hole in my in ground sprinkler. The hole in the garbage disposal has stayed sealed for 2 years. I am liking the looks of the seal over the hole in the inground sprinkler line. I will post my results if anyone is interested.
Date published: 2012-08-28
Rated 5 out of 5 by from great product Great product. I have been using j-b weld for years with no issues. It will hold anything together.
Date published: 2012-07-11
Rated 5 out of 5 by from JB Weld saved a $5,000 commercial ice maker Had a Freon leak at the compressor discharge line connection that was steel into soft copper. It wouldn't braze . Put on 2 layers of JB Weld original strength, let it cure 48 hours each time, then proceeded to get the ice machine up n running. Discharge pressure is 125 psi with no leaks. Held very well. Saved the day.
Date published: 2015-02-18
Rated 5 out of 5 by from This stuff is still the best! I can't believe some of these reviews on this product. Unless they perhaps got a faulty batch of product. I have used this stuff for decades and never once has it failed to perform. I have repaired everything from plastic to steel and never once had a bond fail.
Date published: 2016-09-24
Rated 5 out of 5 by from J-B Weld All J-B weld products are great. I do a lot of hunting and camping and have used it often. You should include it in your camp tote. They say you can fix anything with Duct tape and baling wire. I say J-B Weld, Duct tape and baling wire. I don't leave home without it. Great stuff.
Date published: 2014-01-07
Rated 5 out of 5 by from Worked great for me Sealed a 4 inch crack in the transfer case of a 2000 Contour 5 years ago. When I finally sold it last year, the repair was still holding. No leaks...ever.
Date published: 2015-02-08
  • y_2017, m_5, d_19, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_, sid_100189012, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 94ms