Model # M11161249097000000A

Internet #202332600

Store SKU #201566

null MDF Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: 0.750 in. x 48 in. x 96 in.)
0715487158730

MDF Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: 0.750 in. x 48 in. x 96 in.)

  • Smooth and completely defect free
  • Perfect for painting, staining, veneers with excellent results
  • No assembly required
$30.98 /each

Frequently Bought Together

Product Overview

Temple-Inland UltraStock MDF is valued for its defect-free composition and highly uniform density that allow it to cut, rout, shape and drill cleanly, holding intricate detail with a minimum of waste and tool wear.

California residents: see   Proposition 65 information

  • Offers a smooth, consistent face that is completely defect free
  • High-quality, high-energy-refined fibers and consistent densities of Ultrastock select provide the ideal characteristics to cut and route cleanly
  • Smooth surface polished with a final 150 grit finish
  • Perfectly suited for paints, stains, veneers or laminates-all with excellent results
  • No assembly require
  • Note: Product may vary by store
  • Click to learn how to select the right lumber for your project

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Is this wood good for building speaker boxes?

Asked by: KLindsay25
It's ok, but the best from my experience is Birch. It seems to hold better because it is much stronger so it doesn't crack when you drive the screw, and it's lighter too. So, yes, MDF is the most commonly used, but that's because of how cheap it is....so, if you want quality, use Birch....Lighter, yet STRONGER! Also, Birch is less porous, but if you use a layer of polyurethane sealant that is irrelevant. D
Answered by: Dfish
Date published: 2017-01-04

Do you have a cutting service for your 8ft by 4ft mdf boards?

Do you have a cutting service for your 8ft by 4ft mdf boards?
Asked by: Timbo
I often make pretty intricate subwoofer enclosures and have a few special home depot employees to cut my wood. From my understanding, if they have the time, they will do the cuts. However, some stores charge $1 per cut in California. Just a heads up.
Answered by: Fetimac
Date published: 2017-03-04

Can this be used as sub floor

Asked by: dave
This cannot be used as a subfloor material. It does not have structural properties, nor does it hold nails well, and it will swell with any sort of moisture contact. Use a plywood or OSB for a subfloor.
Answered by: Paul
Date published: 2016-12-06

what does MDF stand for with plywood?

Asked by: ron
Medium Density Fiberboard (i believe, may just be fiber not fiberboard, but yeah...)
Answered by: Dfish
Date published: 2017-01-04
  • y_2017, m_3, d_24, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_38
  • loc_, sid_202332600, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • QUESTIONS, PRODUCT

Customer Reviews

MDF Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: 0.750 in. x 48 in. x 96 in.) is rated 3.4 out of 5 by 10.
Rated 4 out of 5 by from MDF PANEL (COMMON:3/4 IN. X 4 FT. X 8 FT This panel was a good quality and the price was fine. It turned out to be heavier than I anticipated; not sure if the product description indicates weight. I may have missed it. However, if it does not state weight of each panel, it would be helpful to know. This was for a home project of a temporary cellar door, and it was too heavy for both me and my husband to lift. On the positive side, it covered well - I used a high quality Behr paint product from your company. Very pleased overall. Mary Cottine
Date published: 2016-10-18
Rated 5 out of 5 by from Great MDF I am not sure what others others are griping about. Saying the wood leaves fuzzy corners and flakes. I use MDF from home depot quite regularly and have never had that problem. I cut it on my table saw with a diablo 60 tooth finish blade and the edges always turn out crisp and clean. I rout the edges and they turn out great. Maybe its the location these people are in. I do know that home depots products vary from one location to another. Sometimes they vary quite significantly. I have never really looked at the brand of the MDF and compared it to the brand stated online. I am in northern california myself. Most of the lumber home depot sells is of terrible quality, but the MDF they sell at my local stores mills great. FYI. When cutting mdf because you really need to be aware of the blades you are using. Weather on a table saw, circular saw, or router bits. You need to make sure they are good quality blades and router bits and that they are sharp. If you are using one of those cheap 20 dollar blades then of course you are going to get less than desirable results. Same thing with router bits. All of my saw blades at this point are freud diablo which may not be the best blades out there but they are great blades. All of my router bits are a mix of bosch, freud, and whiteside. I do not recommend bosch router bits, but whiteside and freud bits are great. If you are using those little cheap ryobi bits or off brand bits you buy online then do not expect crisp edges from them. You get what you pay for. MDF is softwood fibres that are pressed together with resins to bind it. So you need something really sharp to cut it nicely.
Date published: 2015-12-13
Rated 5 out of 5 by from Great stuff to work with Like the one reviewer mine did not leave fuzzy edges nor did it flake so not sure why others are having that issue, dull saw blades??? I used carbide blades so maybe that's what you need for clean cuts, beats me. This stuff works really well with routers gives you a clean edge with a professional look and cuts like butter. But beware DUSTY!!! the saw dust omitted by this MDF is the consistency of flower and a ton of it! Cutting on the table saw was not as duty but routing made a dust storm. I wore glasses and a mask, highly needed if routing without a vacuum like me. I did my cuts inside my garage because it was in the 20's outside and 2 days later I'm still dealing with dust even after sweeping it all up and blowing out the garage with my blower. So I learned that, since this was my first time using MDF. Also did a test to see how it handles getting wet, holds up just fine. I placed a scrap piece in a sink of water and it did nothing for an overnight test. I will be sealing with paint so I should have no issues using this in my garage. I was skeptical of moisture so it seems like it will be fine and moisture won’t be an issue. I would not use this outdoors because I'm sure it will deteriorate with day in and day out weather, MDF is an indoor material.
Date published: 2016-01-14
Rated 5 out of 5 by from Seems good to me... but read my review I am no wood worker or a professional by any means, so my ratings are based solely on what I used this wood for, which was a subwoofer box. It is perfect for that. As for cutting it, it cut very nicely with a jigsaw and table saw and I found it easy to work with. I've never touched MDF before, and I am glad I wore a breathing mask when cutting it. If you've never cut this before either, please protect your lungs!
Date published: 2014-10-09
Rated 4 out of 5 by from Can't beat the price to be used as workshop countertops. $30 for a huge 4'x8' workshop countertop that I put on top of folding tables? Yes please. I do all sorts of cutting and tool work on these huge slabs. Can't beat the value for a $30 countertop. If you want an even stronger top with less flex, glue two pieces together.
Date published: 2015-02-13
Rated 1 out of 5 by from Cuts poorly I picked up a sheet today to finish up a painted wainscott wall. Doing rail and stile with flat panels so the strips are run through the router table to get the proper profile. The MDF I was using from a local plywood supplier machines beautifully with no issues at all, no fuzzies and crisp corners. This stuff I picked up today leaves behind lots of fuzz and the 90* edge left by the routerbit is fuzzy and not crisp at all. It's not dull cutters as I ran another piece of the god MDF through and got the same perfect cut as it always does. This MDF is fine for shop use but not for anything else. Stick with the plywood suppliers if you need good stuff. That said for shop use this should be about a third cheaper than it is to make it a fair value. I will be hauling it back tomorrow for a refund.
Date published: 2013-03-20
Rated 1 out of 5 by from Poor quality ... not as advertised! Specifications section states this material is "Temple-Inland UltraStock MDF", but it's not. This is inferior product made by Del-Tin Fiber. Don't waste your money ... this has weak internal bonds that easily break and fall apart; not even close to the data sheet specs of the Temple-Inland UltraStock MD.
Date published: 2014-09-07
Rated 4 out of 5 by from Good stuff for the right project Due to unusual dimensions of my project (a bench topper for a corner dinette), I had to buy a whole sheet of this, then have it cut down. It's heavy, of course, but very manageable once cut into pieces, very flat, with very smooth faces, and edges that routed nicely (a simple round over, nothing fancy). The edges are very sharp when handling bigger sections, and one has to take extra care not to drop them, as they do tend to "smush." Other than that, this is a nice piece of material for simple indoor, painted items, with the proper edge prep. It does seem expensive for what it is, but it has a lot of potential uses for wood workers, including jigs, as it seems to machine well. It may be that the quality of the sheets here in CA is better than that in TX. It was a little cheaper by a few bucks than that listed in GA (no idea why it defaulted to Georgia in my search).
Date published: 2014-01-13
  • y_2017, m_3, d_25, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_202332600, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 28ms
  • REVIEWS, PRODUCT