Model # 799397

Internet #202677224

Store SKU #175171

Store SO SKU #869476

null Pine Plywood (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.688 in. x 48 in. x 96 in.)
0857442000682

Pine Plywood (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.688 in. x 48 in. x 96 in.)

  • Ideal project panel due to smooth, sanded face when painted
  • Versatility for multiple applications
  • Pre-sanded and ready to finish

Frequently Bought Together

Product Overview

Premium sanded plywood that can be used in many applications that require high-quality, high-strength sheet material. Resists cracking, breaking, shrinkage, twisting and warping.

California residents: see   Proposition 65 information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can I sand the sheet with 220 grit?

Asked by: cusuni
Definitely but that is is a little fine to start with. I usually use 120 before staining or sealing then go to 220 between coats of finish.
Answered by: mrkitchn
Date published: 2017-02-18

Is the Pine Plywood assembled with exterior rated glue?

Considering for use as kitchen countertop substrate. Countertop composition; Pine plywood, modified thinset mortar, 1/4" Hardiebacker, modified thinset mortar, 1/2" granite tiles 18"×25".
Asked by: ArtisanRemodeling
Adhesive: All AraucoPly® panels are laid up with phenolic WBP glue which is suitable for exterior use. This glue complies with European standard EN 314. Formaldehyde emission is 0.02 mg/L, which meets E1 emission regulations. So the answer is YES on the exterior rated glue. Side Note: Pretty much every plywood, which is NOT formaldehyde free, is made with an exterior use glue. Personally, I would use OSB, before this, as it will be flat. This product warps very easily. I also prefer 1/2" Hardibacker, especially since you get twice the thickness for only $2 more per sheet.
Answered by: GFactor
Date published: 2017-01-25

I am looking to make a headboard. Would this type of plywood be best?

Asked by: Designermom
If you are painting the product, Yes. If staining, No, use Birch, Maple or Oak. If wrapping with fabric, this or MDF would work. If you want a very smooth painted surface, with no grain, go with MDF.
Answered by: GFactor
Date published: 2017-01-25

Would it work as a table top?

I am trying to make a craft table and I need something to go on top.
Asked by: lilly
Yes but I would recommend a 1 1/2 or thicker solid edge to be applied as a stiffener
Answered by: mrkitchn
Date published: 2017-03-29
  • y_2017, m_4, d_24, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_, sid_202677224, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • QUESTIONS, PRODUCT

Customer Reviews

Pine Plywood (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.688 in. x 48 in. x 96 in.) is rated 3.3 out of 5 by 33.
Rated 5 out of 5 by from I have had good luck with this product. They have several different panels with pricing in same r... I have had good luck with this product. They have several different panels with pricing in same range. I think this may be some of the problems people have mentioned. I have purchased this product 6 times over a 4 year period at different locations to make upper end closet units and a couple of cabinets and have always received the same quality. It has been difficult to find sometimes buried under other product. I would say it is more like an AB quality instead of AC product. The back side has a few open knots that can be filled but this product could easily be stained. Much easier to work with than MDF or other paint grade panels. Like anything you may need to cull some of the panels off the top for damage etc. There may be very slight warpage but if you are making cabinets or shelving with reinforced solid wood nosing it will come out in the process. Very good value for the cost. I can't find a better deal off the shelf.
Date published: 2016-12-03
Rated 1 out of 5 by from Originally home depot carried a plain sanded plywood by purebond which they replaced with this ga... Originally home depot carried a plain sanded plywood by purebond which they replaced with this garbage. Many patched flaws normally hidden on under side. The general manager needs to be fired for allowing this product to replace purebond.
Date published: 2017-01-10
Rated 1 out of 5 by from I planed to make cabinets with this plywood. The panels all warped. The C side get longer than th... I planed to make cabinets with this plywood. The panels all warped. The C side get longer than the A side. Tried to straighten with 80 pounds of weight overnight spanning between blocks. Buy American plywood.
Date published: 2016-11-05
Rated 5 out of 5 by from Great for cabinets I purchased four 4x8 boards to build the interior of an 8ft closet. It is strong and looks good. The veneer is about 1/10" thick - one side is perfect while the other side has a 1-2 small voids. arranged the pieces so the the voids are not visible. Good price and good results compared to the oak plywood. Before buying, I read all the reviews with confusing ratings. I think Home Depot is mixing different products under the same description. One of the reviews says it was manufactured in China and it is of low quality. FYI, the product I found in my local store says "Product of Chile CMPC" and has a UPC 7809543-804167. See attached picture of the only defect (1-2") found on the board
Date published: 2016-09-08
Rated 5 out of 5 by from Better than I expected! This plywood was easy to work and looked as good as the more expensive hardwood plywoods that I considered! Definitely worth the price!
Date published: 2016-12-10
Rated 5 out of 5 by from I'm building some cabinets and was going to get PureBond birch veneer which has been highly recom... I'm building some cabinets and was going to get PureBond birch veneer which has been highly recommended for cabinets, but when I looked at it, it was only 5 ply, not 7 as advertised (unless the veneer was so tiny I just couldn't see it). So I tooled around and found this instead and couldn't be happier. It's 7 ply, minimal voids, and good quality. The bad sheets are easily avoided. I have a ways to go in my project, but will happily continue to use this product. The manufacturer is Arauco on the sticker so I hope they don't switch brands anytime soon.
Date published: 2017-03-23
Rated 1 out of 5 by from Picked down through the pile to find a flat sheet without too much damage. Brought it home and cu... Picked down through the pile to find a flat sheet without too much damage. Brought it home and cut out four shelves 24" x 24" sanded and applied poly. Next morning all the shelves had 5/8" bow with the 4 ft scrap piece having over a inch. The only way form them to lay flat was to back score about 5/8" and then I had to push the bow out.
Date published: 2017-02-28
Rated 1 out of 5 by from unuseable garbage First off, I have never written a bad review, so I do feel bad about this but I mainly don't want others to waste their money. This is not suitable for anything. The veneer is ridiculously thin (thinner than binder paper) and tears out even with a brand new blade. There are voids everywhere between the plies. It is unuseable. Also, it's made in China. Which shocked me since Oregon is 300 miles away and that's where lumber and especially sheet lumber is made. Please save yourself the trouble of buying this and then having to go back and buy something else. Home Depot (for me) is 40 minutes away, so this is a pain.
Date published: 2016-05-08
  • y_2017, m_4, d_23, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_33
  • loc_, sid_202677224, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 94ms
  • REVIEWS, PRODUCT