Plaskolite Pro Grade Cutter-1888888A - The Home Depot


Model # 1888888A

Internet # 202519358

Store SKU # 215958

Pro Grade Cutter

Plaskolite Pro Grade Cutter

This item has been discontinued.
The Home Depot no longer carries this specific product.



Model # 1888888A

Internet # 202519358

Store SKU # 215958

Heavy duty cutter for use on acrylic and polycarbonate sheet products. The double bevel scoring edge gives you a long lasting clean cut. Its ergonomically shaped handle helps fight hand fatigue allowing you to make more cuts comfortably

  • Double bevel scoring edge
  • Heavy duty construction
  • Ergonomically designed handle
  • Can be used on a variety of materials


Assembled Depth (in.)  1. in  Assembled Height (in.)  8.312 in 
Assembled Width (in.)  3.56 in  Product Length (in.)  8.312 
Product Thickness (in.)  1 in  Product Width (in.)  3.56 
Bullet Proof  No  Mirrored  No 
Non-Glare  No  Product Weight (lb.)  0.31 lb 
Shatter Resistant  No  Surface Type  Clear 


Rated 5.0 out of 5 by 2 reviewers.
Rated 5.0 out of 5.0 by Great Tool When Properly Used I had to cut a piece of 1/4" acrylic. I researched the best way to cut and found one of these tools would do the job. The instructions on the package say it will cut up to 1/4" acrylic and that is what I wanted to cut. You need to clamp a straight edge on top of the acrylic down to a surface with a 90 degree straight edge. The straight edge and clamping surface edge needs to span all the way across the piece you are cutting. The straight edge on top lines up with your cut line and the edge of the clamping surface under the acrylic. Once you have this set up you can begin scoring. It may take more than a few passes to score it enough. The blade is V-shaped so it will slowly strip off the acrylic and make a small v-groove into it. You must get at least half way through the acrylic before trying to snap the rest off. If everything stays clamped in place and you strip the acrylic v-groove more than half the thickness the rest will snap right off. Then you can sand the edge a bit to clean it up if you want to. I did this with this tool and it worked perfect. Great Tool ! October 7, 2012
Rated 5.0 out of 5.0 Cutting tool works I used this tool to score a 1/4 in. thick sheet of acrylic. The tool worked well for this job. November 11, 2014
1-2 of 2


Store Exclusive. This item is available for purchase in select stores only.