Model # 00100c

Internet #100070177

Store SKU #549736

Shur-Line 4.75 in. x 3.75 in. Paint Edger Classic Design
0022384001008

Shur-Line

4.75 in. x 3.75 in. Paint Edger Classic Design

  • Leaves a clean, straight line around doors, windows and molding
  • Eliminates the need for painter's tape, saving time and money
  • Molded grip allows firm grasp for superb control
$347 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The Shur-Line Paint Edger has a quality woven pad that assures a straight, clean line. Guide Wheels make trimming ceiling, doors, windows, and baseboards easy.

  • Shred resistant woven pad for smooth finish
  • Guide wheels roll along trim and ceiling, control cutting in to eliminate the need for taping
  • Paints a straight line along ceilings, doors, windows, chair rail and baseboard
  • Use with the paint edger refill (Refill pads not included)

Specifications

Dimensions

Product Depth (in.)
4.75 in
Product Height (in.)
1.08 in
Product Width (in.)
3.75 in

Details

Applicator/Tool Type
Paint Trimmer/Edgers
Interior/Exterior
Interior
Paint Product Type
Applicator/Tool
Product Weight (lb.)
0.147lb
Product type
Trimmer/edger pad

Warranty / Certifications

Manufacturer Warranty
no warranty

More Products With These Features

Search

Customer Questions & Answers

Would this work on textured walls? Thank you!

Asked by: momof8
I always just set it lightly into my paint tray. A very light touch is a must - it'll load with paint over time, but you don't want to overdo it - because you'll get paint on the wheels - and thus, the ceiling.
Answered by: MP81
Date published: 2016-10-03

Can you buy replacement pads or do you have to buy a whole new gadget.

Asked by: Chris
Watch out - the new design of replacement pads, with notched edges, are terrible! They leave an unpainted line along every edge.
Answered by: Mammy5
Date published: 2017-03-13

How do you fill it

Don't understand how to use it. Need a video-DUH
Asked by: rtwildwillie
i am using 5 gal bucket with paint and metal screen insert for the roller. So to fill the edger I would load the roller with paint and roll it against the screen. While the paint runs back down into the bucket I run the edger sideways against the screen upwards and lightly press the edger against the screen. ( sideways to protect the wheels side from paint). You can do it couple of times till you get the fill of it.... Dipping the edger into the paint is error prone.... good luck
Answered by: kapi02
Date published: 2016-07-14

Are the straight line ( without notches ) pads still available? The number 100076393 shows the re...

Are the straight line ( without notches ) pads still available? The number 100076393 shows the refill with notches!
Asked by: WK
The flat pad has been replaced with the updated version with notches that direct paint around and away from the wheels to reduce the chance for paint to inadvertently coat the wheels and mar the trim. The notched pads were designed to work with Shur-Line Edger versions dating back to 2008.
Answered by: Shurline Product Team
Date published: 2017-04-05
  • y_2017, m_8, d_18, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_100070177, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms
  • QUESTIONS, PRODUCT

Customer Reviews

4.75 in. x 3.75 in. Paint Edger Classic Design is rated 3.7 out of 5 by 39.
Rated 1 out of 5 by from this model ok, new ones terrible. I gave it 1 star so more would read this. warning, the new design with the pad notched by the wheels is junk, don't even try them. you want the paint near the top where the paint roller can't get but surline engineers tried to keep paint away from the wheels but now with notches, not enough paint gets by the ceiling, intermitent, and leaves an irregular 1/8 inch unpainted gap. Now I have to go over it all with a brush anyway. Thenew notched pad ones stink. BEWARE.
Date published: 2017-05-17
Rated 3 out of 5 by from Shur-line, what have you done? Your marvelous paint edger tool, which so many DIY-ers like myself... Shur-line, what have you done? Your marvelous paint edger tool, which so many DIY-ers like myself rely on, used to make painting so much easier and quicker. Our new one came with one straight edged pad, but we also bought a replacement pack, which were notched instead of straight. But the replacement pads with the notched edges are a DISASTER! They do NOT work - did anyone in your company even try them out? Instead of the even line right along the edge, these notched pads leave an unpainted line right where you want the paint to be. Please bring back the original pads!
Date published: 2017-03-13
Rated 1 out of 5 by from Not getting this again At first it performed well, then somehow, paint managed to get on the front and I put a wonderful gray line on my ceiling. I cleaned it up and the same thing happened again. It worked nicely for about 8 feet. It doesn't get tight to the edge as you would hope. I've painted plenty of things in my time as the Navy made me a high ranking amateur low end pro painter. Don't waist your money on this. I had to spend more money on getting ceiling paint and more time redoing my trim work. Take the extra time to frog tape it.
Date published: 2017-05-15
Rated 5 out of 5 by from LIFESAVER! This product was an absolute lifesaver on my last project. It probably cut the time I spent painting in half. My hand isn't steady enough to paint around trim and ceilings freehand & I hate having to tape everything off, so I gave this a shot & it worked perfectly. I didn't tape off a single thing & my edges are perfect. One tip though - don't dip this into a paint pan (even a shallow one), get a separate brush & brush the paint on. If you get too much paint on it, it will squeeze out the edges and/or get on the rollers, and thus, on your ceiling & woodwork. As long as you brush the paint on though, you're good to go! I'll never paint another room without this handy item!
Date published: 2011-06-30
Rated 5 out of 5 by from I'm a professional contractor, and on a jobsite you don't see many "gimmicky" contraptions like t... I'm a professional contractor, and on a jobsite you don't see many "gimmicky" contraptions like this one, because they usually don't work that well compared to the tried and tested products. That being said, I was pleasantly surprised that this thing actually lived up to my expectations. It does take some skill to use it, and its not perfect, but its about as good of an edger as I think is realistically possible. The trick is to be very careful with it, and keep the "wheels" clean. As long as the wheels are clean it makes pretty straight lines. It does work with light textures, such as orange peel and knockdown. It doesn't work that well with Crows foot, but its still usable. After painting one or 2 rooms the pad wears out, but no big deal. This thing is MUCH faster than using painters tape or carefully cutting the edges with a brush.
Date published: 2017-03-14
Rated 5 out of 5 by from Did 200+ feet of trim in no time with this version. It's really awesome, period. I tried the Pr... Did 200+ feet of trim in no time with this version. It's really awesome, period. I tried the Pro version first actually, and it was horrible with transferring paint to the black runners somehow as you went, that got it all over the trim you didn't want painted. I'll never paint corners without this again. This version has the square pads and not the cutouts if anyone was wondering.
Date published: 2017-07-11
Rated 1 out of 5 by from Don't use if the wall is textured because the paint doesn't spread evenly and misses spots so you... Don't use if the wall is textured because the paint doesn't spread evenly and misses spots so you have to load up more paint and then it just smears it onto the ceiling or window trim. Total nightmare.
Date published: 2017-05-16
Rated 2 out of 5 by from Like someone else said, it leaves a noticeable gap. Paint your trim first and extend it onto the ... Like someone else said, it leaves a noticeable gap. Paint your trim first and extend it onto the wall. Then use the edger to paint the wall.
Date published: 2017-07-06
  • y_2017, m_8, d_14, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_39
  • loc_, sid_100070177, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 119ms
  • REVIEWS, PRODUCT