Questions and Answers for Glacier Bay 42 in. x 1-1/2 in. Concealed Peened ADA Compliant Grab Bar in Polished Stainless Steel

A:  Item #5 in Product Overview states, "WingIts compatible flange for stud-less installation; WingIts sold separately (SKU 147-567)." Or, you can use mushroom head toggle-bolts like I did.

A:  Thank you. As long as the screws can hit a stud, it can be installed in that application.

A:  easy to install, 10 minutes tops

A:  Don't have specific numbers, but they are very high quality.

A:  I do not know the grade of the stainless steel in the grab bars but I will say that I have had 6 of them installed in the house for over two years and another two installed for over four years (including one that is installed on the exterior of the house). None of these grab bars has shown even the slightest bit of any kind of corrosion.

A:  The outside edge of the tube extends 3 1/8" from the wall. The tube itself is 1.5" in dia. So you have 1 5/8" clearance between the inside edge of the tube and the wall - more than enough room for your hand.

A:  Thank you. According to the specifications, that comes out 2.992 inches.

A:  Yes, I hired someone to install it in less than an hour plus I had him do another project for me—very professional and kept the area clean

A:  Thank you. You would need to check with your local Home Depot store.

A:  Thank you. This product is made in China.

A:  Thank you. For this model, it is three inches away from the wall.

A:  I fastened it to the wall studs, which are 16 inches apart. Since the grab bar is 18 inches, it is diagonal. I find that to be more attractive than straight horizontal or vertical, and it feels more natural when I grab it. Also, since it is screwed into the studs, it feels rock solid.

A:  I have installed them horizontally, vertically and on the diagonal.

A:  Model #RC-RESGBW35-2 Store SKU #1005557118 Store SO SKU #1000762707 Cost: 14.98

A:  This particular grab bar is designed to be attached into the wall's substrate. No suction cups (or alternative attachment method) are provided. If you can anchor into the substrate behind the shower wall then you could make the installation work - but be SURE to caulk points where you have penetrated the shower wall so shower water doesn't get behind the wall..

A:  Thank you. This Bar is attached with screws.