Model # 8203045

Internet #202075055

Store SKU #332912

null 9-3/8 sq. ft. Cape Cod MDF Wainscot Planks

9-3/8 sq. ft. Cape Cod MDF Wainscot Planks

$12.75 /package

Frequently Bought Together

Product Overview

The 9-3/8 sq. ft. Cape Cod MDF Wainscot Planks are pre-primed for simple painting. The planks feature a tongue-and-groove design and a white color.

California residents: see   Proposition 65 information

  • Manufactured from MDF
  • Tongue-and-groove design
  • White color
  • 9 sq. ft. coverage
  • Pre-primed for easy painting
  • Includes 6 planks
  • Note: Product may vary by store.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can it be applied to concrete walls and metal dividers in old school bathroom

Asked by: Tk
Sure. It's just a matter of fastening the upper and lower strips - the planks just fit into slots and don't attach to the wall. For the metal dividers, I'd just use sheet metal screws. Same for the concrete, but use a hammer drill to make holes for plastic anchors. Tapcon screws would be overkill.
Answered by: aesch
Date published: 2015-11-04

Slot width

How wide are the slots inside the panel?
Asked by: Gabor
Each piece is 32 in. high x 7 in. wide x 1/4 in. thick. The space between the each bead is 2 inches. I hope that answers your question.
Answered by: BC Customer Service
Date published: 2016-03-26

What is the best adhesive to put this on a bumpy texture?

I am using this product as a backsplash in the kitchen. I want to put it over existing backsplash which is a fake bamboo type material. What is the best adhesive for the job?
Asked by: kw1011
Product is designed to be retained by the grooves in the upper and lower rails (which get fastened to the wall. If you're going to use adhesive for application, there are numerous construction adhesives available. Recommend you pick one based on the materials - ie: wood and ??. You probably won't want one meant for masonry, and you don't need exterior. My box of tubes has one called Locktite PowerGrab, meant for indoor use and dries clear. I used it to glue some wood strips to a basement support column - should work for you.
Answered by: aesch
Date published: 2015-11-04

Product specs say black, overview white

What color are these primed?
Asked by: SheenRe
We will update that right away! These planks are pre-primed white!
Answered by: BC Customer Service
Date published: 2015-11-10

Together with the wainscoting and trim - both above and below - what will be the finished height?

Asked by: Brian
It really depends on which trim you use. They come in difference widths.
Answered by: BC Customer Service
Date published: 2016-12-06

Does this product meet the American National Standards Institute (ANSI) pertaining to the use of ...

Does this product meet the American National Standards Institute (ANSI) pertaining to the use of formaldehyde? I have read that many MDF products such as bead board contain significant levels of formaldehyde, which is concerning as my wife is pregnant and we just installed it in the nursery.
Asked by: Michael
This items is CARB certifiied
Answered by: BC Customer Service
Date published: 2016-11-17

What are board dimensions? LxWxD for 9-3/8 SQ. FT. CAPE COD MDF WAINSCOT PLANKS

Asked by: Gregg
I have purchased and installed this product in my bathroom. Each package covers 42" wide (6 planks total) x 32" tall x .25" thick. Easy to install and looks great.
Answered by: Annie1NH
Date published: 2016-03-26

Can this be installed behind an electric baseboard heater? I believe the vinyl version can not--will the MDF hold up in this installation?

Asked by: Pete
  • y_2017, m_2, d_16, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_, sid_202075055, prod, sort_[]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms

Customer Reviews

9-3/8 sq. ft. Cape Cod MDF Wainscot Planks is rated 3.8 out of 5 by 12.
Rated 4 out of 5 by from Gives a fresh new look! Despite some of the reviews of poor quality I still bought the product and I have to say I'm happy with the results. Like others have said it is of poor quality and no two packages are the same But with a touch of putty and some caulking to hide some of the imperfections and some of MY imperfections it looks great! I do recommend you give this a shot, it's priced right but don't be surprised you will get some damaged pieces and a few not cut square which and I will say was only a few pieces and they were able to be used in area where they would be cut, oh and that's out of 15 packages.
Date published: 2014-05-11
Rated 1 out of 5 by from Terrible product I installed 80 linear feet with the base and chair rail. Very disappointed in this product. I wanted the tounge and groove to hide all the joints which that was achieved. However, the ends are not square, length varies by up to 1/2", the beads are rough as a cob (chatter marks) the tounge and grooves vary but for the most part are workable. The Chair rail had very inconsistent profiles even on the same piece, which made mitre and splice joint more challenging than they should be. The groove on the base is only 1/2" would like a full 1". The overall look came out good, just a lot more work than what it should be for a manufactured product (I think I could have made better quality with my own tools!).
Date published: 2012-11-25
Rated 3 out of 5 by from reccomend Easy enough to install. Would have been alot easier if the mfg. had cut the ends square, 1/8th inch out of square with a brand new combination square. Check squareness before you buy,probably just the lot # that I bought, hope so.
Date published: 2011-10-24
Rated 4 out of 5 by from Easy install This stuff is a breeze to install. I installed 35 linear feet with baseboard and chair rail in a 4-5hrs. It would have gone much quicker if I did not have to trim out the outlet openings. I applied Liquid Nails to back of the panels and used finish nails to tack them in place.
Date published: 2010-09-01
Rated 5 out of 5 by from Workability of paneling Overall I rated this product excellent based on the following item. Workability= Easy to cut. Standard tools needed for installation. Strength and durability= Comes primered ready for paint. Once paint is applied product cleans up with little effort. Apperance= Product looks great once paint is applied. Cost= Costs a little more than full 4x8 sheets of paneling, but there is no need to make cross cuts. Ease of installation= No specialty tools needed for installation.
Date published: 2010-03-18
Rated 4 out of 5 by from Watch the fit! This is a decent product for what it is - primed MDF. Flat surfaces are smooth, the bead surfaces are kinda rough. I used the companion base and header strips - ditto on the primed MDF - not flat but trim screws pull the strips into place easily. Looks decent and easy to install. The only glitch is that the grooves are not always deep enough to accept the tongues on the mating pieces. This is a definate quality issue with the product. Should not be a problem if you're aware of it and are prepared to shorten the tongue on the mating piece (no real way to deepen a too shallow groove).
Date published: 2012-05-30
Rated 1 out of 5 by from Out of Square This was easy to install, however the majority of the panels were out of square. this could be hidden with the chair rail, so not a major problem, but you by something expecting it to be square for an easy install.
Date published: 2013-04-01
Rated 5 out of 5 by from Good product and easy to install My son installed the Cape Cod wainscot planks on the walls of my bathroom and it looks great. He used the trim that matched it. He had to cut some pcs to fit around the tub and the closet door but he said it wasn't hard to do. The finish is smooth and only needed one coat of paint. It looks great.
Date published: 2012-12-17
  • y_2017, m_2, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_202075055, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 79ms