Model # 88094

Internet #202688785

Adjustable Clamp Clamp Mate Frame Clamp

Discontinued Adjustable Clamp

Clamp Mate Frame Clamp

store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

This framing clamp has a simple operation and clamps all four corners at the same time. The clamp is self-squaring and has reversible jaws for both small and large frames. The clamps folds up easily for storage and can be assembled in a matter of minutes.

  • 5 in. x 7 in. minimum clamping
  • 26 in. x 30 in. maximum clamping
  • Non marring corners to protect frames
  • Steel construction for strength and durability
  • Pony




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Won't the clamp be in way for nailing orand do i just glue with this unit and nail or screw the next day?

Asked by: marv
No. You will glue, clamp, and nail. In that order, at the same time. Remember to wipe off the excess glue at the joints...especially if you want to stain it. Paint covers, stain highlights. I use V nails (joiners).If are using brads you will glue, nail, and clamp. If nails are getting in your way you are doing it wrong. I also use a band clamp. This works OK, but everyone has their preferences.
Answered by: DC
Date published: 2016-04-25

Will this clamp adjust small enough to make a 4x6 Frame

Asked by: Broeck
No, the minimum size is 5 x 7 inches.
Answered by: CommunityAnswer
Date published: 2016-06-05

Frame size????

How big a frame will this clamp work with - outside measurements? I have been using this type frame for years and never had a problem but would like to pick up locally rather than have to order.
Asked by: prestonphoto
This will have a 26 in. x 30 in. maximum clamping ability.
Answered by: CommunityAnswer
Date published: 2016-06-04

How do you make 5 x 7 frame

Asked by: Jj
It's simple. Measure the wood, cut at 45 degree angles. Your going to want to cut a little short to allow for the rabbet. It depends on the size if the straight bit you use. I typically allow for a 1/2 inch for frames smaller than 11x14. That 1/4" for each side. Glue (modestly), clamp, and V nail the joints. Wipe off excess glue. Wait an hour for it to set. When you have the right materials on hand it takes about 20 minutes (barring the drying time). Then just sand it, and finish it to what you want. There are plenty of vids on Youtube. I don't agree with all of them, but they all work.
Answered by: DC
Date published: 2016-02-22
  • y_2017, m_7, d_19, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_202688785, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 61ms

Customer Reviews

Clamp Mate Frame Clamp is rated 4.2 out of 5 by 22.
Rated 5 out of 5 by from Very easy to use The only thing that I can think to say is wrong with this is, it needs to have an extension kit to make larger frames.
Date published: 2013-01-10
Rated 4 out of 5 by from Lack of Instructions is Inexcusable The black pieces go ON TOP OF THE ARMS. My first assembly didn't work because I inserted the arms inside the black pieces....DUH. THE PICTURE CAN BE INTERPRETED BOTH WAYS.
Date published: 2016-03-15
Rated 2 out of 5 by from Product needs some changes for it to work as advertised I used this product to assemble two picture frames. The first one I had a hard time lining up the frame corners and having them slip out of place as I tightened the screw pulls everything together. The second one was a major problem. As I tightened the adjustment screw, the washer on the screw wedged inside the plastic bar and I could neither loosen or tighten the adjuetment screw. Then one of the small bolts holding the arms to the bars had the lock nut fall off.With glue on the moulding corners I had no choice but get my clamps out and try to get everything lined up before the glue dried. I then discovered that all four of the little bolts are too short not allowing the locking part of the nut to engage on the bolt. I am now going to replace the bolts with longer ones and replace the washer on the adjustment screw with a larger one and I believe the thing will work like it is supposed to.
Date published: 2014-02-18
Rated 4 out of 5 by from Good product The framer does its job but, at least for me, it can take a while getting everything laid out right. Once done, though, it does a good job of holding the frame together tightly. One thing I think would improve it would be to have one long open space on each leg for the corner clamps rather than having to move them from hole to hole.
Date published: 2011-10-06
Rated 4 out of 5 by from Frame clamp Works great after you figure it out. No instructions , direction etc. just a picture on the box .
Date published: 2016-04-05
Rated 5 out of 5 by from simple to use and does what it intends easy to use and does the job; I'll never use individual corner clamps again.
Date published: 2013-07-23
Rated 2 out of 5 by from subpar product This product is as described however for making picture frames it is not as good as a "band" clamp. I ended up using regular rachet straps and they work perfectly as long as the mitered edges are good. with this clamp the edges were hard to ling up and it was had to control all the boards and the clamp at the same time.
Date published: 2014-12-09
Rated 5 out of 5 by from Easy to use frame clamp This clamp is EASY to use and gives great results. The only problem was that there were NO assembly or use instructions. Fortunately there was a picture on the box to work from...
Date published: 2015-01-20
  • y_2017, m_7, d_19, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_, sid_202688785, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 202ms