Rated 3.6 out of 5 by 7
Rated 5.0 out of 5.0 by TandT Drainage Adhesive
This should solve most of the leakage problems for using the wrong glue. This will bond polystyrene pipes to styrene joints. Just type in "drainage adhesive" in the home depot search and the product will come up.
January 5, 2015
Rated 5.0 out of 5.0 by Southbridge Note to all who had issues with glue.
This product is HDPE and they make an adhesive that is formulated for this pipe. You can consult the manufacturer as we have years ago and they recommend a spray on adhesive by 3m(Heavy duty Adhesive), all available in home depot. This is drainage pipe and thus will never be completely leak resistant. But in low flow conditions you don't mind a little water leaking as this pipe is designed to carry gravity flow (Sloped pipe), When used with EzFlow pipe this makes a great way to recharge the ground water under low flow events.
Hope this helps those who have used the incorrect glue, this pipe does not react like PVC sch40 type pipes, the glue becomes the gasket to keep it together and makes the joint strong.
March 10, 2014
Rated 5.0 out of 5.0 by ajperl It's Pipe!
There's not a whole lot one can say about a length of pipe but, for my purpose--sump pump discharge line--this works perfectly.
May 21, 2013
Rated 5.0 out of 5.0 by JimW Not meant to be glued
This pipe is light-weight, virtually unbreakable (it will crush with sufficient force), cuts easily, and goes together fast. It seems to be fairly sunlight resistant.
It is not designed to be watertight. It is chemically resistant polyethylene, not PVC, and PVC cement will *not* stick. If you need to reduce the seepage, you might try silicone caulk, but the silicone won't stick well either. Wrap the joints with plastic duct tape (the cloth tape with rubber adhesive will degrade) for additional resistance. Most tapes will degrade in sunlight. If the pipe is vertically oriented, have the bells face up, if they face down, some water will leak out.
If you want watertight, use PVC pipe schedule 40 or DWV. ABS can be cemented as well.
The styrene fittings will degrade in sunlight to the point they will disintegrate after a few years. The PVC fittings are more durable. Painting the styrene fittings with a high-quality exterior paint will extend their life.
January 16, 2014
Rated 1.0 out of 5.0 by BackyardDIY Leaky Pipes...
Used this product in a downspout drain application. I could not get the connections to be leak-free while testing it. It was also easy for connections to move while manipulating the pipe in the trench. The styrene couplings that are sold at the store cannot be glued to this material either...90 degree bends were leaking as well... this may not be a problem if you are installing a french drain
I'm going Schedule 40 PVC...which Home Depot here (NorCal) doesn't carry.
January 7, 2013
Rated 3.0 out of 5.0 by Chas Can't get PVC cement to work
I like the price and the quality, but I can't get the pre-attached connectors to accept standard PVC cement. I was able to get the downspout connector to cement, but I am having difficulty getting the 90 degree and T connectors to hold. This has caused a delay in getting the project done and concerns me of possible leaks. Looking for solutions now.
October 30, 2013
Rated 1.0 out of 5.0 by Winter Cost me $900
I spent $900 on labors and materials and have to redo my downspout drainages. Leaks.
December 5, 2013