Model # 95135.0

Internet #204071424

AlumiConn 3-Port Al/Cu Wire Connectors (100-Pack)
0719362951355

AlumiConn

3-Port Al/Cu Wire Connectors (100-Pack)

$260.00 /package

Frequently Bought Together

Product Overview

King Innovation’s AlumiConn Aluminum to Copper Lug is approved by the Consumer Product Safety Commission (CPSC), UL, and numerous insurance companies as a safe method for aluminum wiring repair. Manufactured in Missouri, AlumiConn is a lug style connector with three separate ports to eliminate intermixing of conductors. It coats aluminum wires with a thin layer of silicone sealant to provide resistance from oxidation, and uses set screws to break up surface oxides and provide a secure mechanical connection. Avoid a complete re-wire by using AlumiConn, the most cost-effective aluminum wiring repair solution available.

  • Approved by the consumer product safety committee (CPSC), UL listed, approved by insurance companies
  • Most cost-effective solution for repairing aluminum wiring systems
  • Three ports allow conductors to remain separate, permitting the lug to run at a lower temperature and provide longer term reliability
  • Secure mechanical connection
  • Contains a layer of corrosion inhibitor that provides resistance from oxidation
  • Made in the USA

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

What is the smallest quantity that I could purchase?

What is the smallest quantity that I could purchase?
Asked by: Maverick
2 pack. It is sold in stores for $6.98. http://www.homedepot.com/p/AlumiConn-3-Port-Al-Cu-Wire-Connectors-2-Pack-95104/202889890
Answered by: lambition
Date published: 2017-01-25

Can you put more then 1 wire under a terminal?

Asked by: jtrisch
Two wires under one terminal is never recommended. This is true for copper and aluminum wires. Since the reason you use the wire connectors is to make a safer connection for aluminum wire, it would be defeating the purpose.
Answered by: BigG
Date published: 2016-08-14
  • y_2017, m_3, d_27, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_204071424, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms
  • QUESTIONS, PRODUCT

Customer Reviews

3-Port Al/Cu Wire Connectors (100-Pack) is rated 4.9 out of 5 by 7.
Rated 5 out of 5 by from Been using this connectors for a remodel project on house with aluminum wires. Easy to use, fool ... Been using this connectors for a remodel project on house with aluminum wires. Easy to use, fool proof. My only wish is they make 4 port ones and maybe stack 2 ports on bottom and 2 ports top. I had to use 4 connectors where 3 aluminum cables were spliced and have to add one for copper going to the switch or outlet. It is very tight to fit 4 of these connectors + outlet in a junction box and impossible if that happens to be a GFCI outlet. This is excluding ground wires, which I had used regular wire nut with alnox due to limited space and price of the connectors.
Date published: 2017-01-25
Rated 5 out of 5 by from This is a required product when connecting aluminum and copper wires if the job is to be done cor... This is a required product when connecting aluminum and copper wires if the job is to be done correctly.
Date published: 2016-12-13
Rated 5 out of 5 by from AlumiConns The electrician was happy with the alumicons, so I was fine with them.
Date published: 2016-10-25
Rated 4 out of 5 by from Expensive but the only cheaper option. I purchased a home with aluminum wiring. Inspector and Realtor did not mention this???? I found after much research that this product is one of the methods used to help remedy a fire hazard. These units are a lower cost option for a do it yourself person that feels comfortable working with electricity. Please do your own research: I used these to pigtail copper from aluminum wiring to switches and plugs. There is allot of info online for those of you willing to attempt a DIY project. They do recommend using a torque screwdriver for tightening the terminals. I found a suitable one on Amazon for around $60. Be sure and use the exact size screwdriver bit for tightening. The screws in the Alumiconn connector are a little soft and can break at the screwdriver slot. Depending on the box size and the number of connections in the box it can be challenging to fit the required number of Alumiconn connectors in the box. Electrical codes will dictate how full a box can be.
Date published: 2013-12-26
Rated 5 out of 5 by from Easy to install. I believe that the Alumicon connectors are the best and easiest solution to making a house wired with aluminum safe. The connectors are easy to install, and if done correctly, will last a lifetime.
Date published: 2013-05-29
Rated 5 out of 5 by from Very good connectors. Easy to in stall. We installed the connectors and they worked well. They easily connected to the aluminum wiring. The caps hold firm.
Date published: 2014-04-02
Rated 5 out of 5 by from Code legal The product is the best way to connect smaller wires together when it comes to aluminum to copper.
Date published: 2016-06-24
  • y_2017, m_3, d_26, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_, sid_204071424, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 25ms
  • REVIEWS, PRODUCT