Model # A1060X

Internet #202035214

Store SKU #354445

Avanti 10 in. x 60-Tooth Fine Finish Saw Blade
0008925083962

Avanti

10 in. x 60-Tooth Fine Finish Saw Blade

$19.97 /each

Frequently Bought Together

Product Overview

Rejuvenate the wood-cutting ability of your table saw or miter saw with the 10 in. Fine Finish saw blade from Avanti. Constructed with carbide-reinforced steel, this blade consists 60 sharp teeth to cleanly slice through MDF, hardwood, softwood, plywood and molding. Four expansion slots help the blade expand and contract during use, resulting in minimal vibration and straight cuts.

  • Carves cleanly and leaves a fine finish
  • Expansion slots reduce noise and heat buildup for smooth operation
  • Economical, high-performance blade can be sharpened to extend life
  • Not intended for use above 6000 RPM
  • Recommended for DIY projects and construction use
  • Note: product may vary by store

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

5 Questions12 Answers

Customer Questions & Answers

10 in. x 60-Tooth Fine Finish Saw Blade
10 in. x 60-Tooth Fine Finish Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

is 40T ok for plywood and OSB?

This question is from 10 in. x 40-Tooth General-Purpose Saw Blade
Asked by
Read all my Q&A
July 8, 2016
not looking for the smoothest finish just don't want tear up, thanks.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Yucca Vly CA
Read all my Q&A
Home Improvement Profile: Professional
July 9, 2016
Answer: 
10 Inch table saw blade, I used mine for my radial arm saw and it cut right through the 4x4's
and yes it is a clean cut. Plywood or 1in board should not be a problem at all and OSB never
tried it but this is a "General purpose" blade.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
1 answer

Can this be used to cut aluminum window screen frame? Without destroying it.

This question is from 10 in. x 200-Teeth OSB/Plywood Saw Blade
Asked by
Read all my Q&A
June 25, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Evansville, IN, USA
Read all my Q&A
Home Improvement Profile: DIYer
July 23, 2016
Answer: 
It will cut aluminum if you turn the blade around so the teeth cut on the back side. I have used blades like this to cut steel roofing and the blade was still fine for cutting wood. Be sure to use safety goggles and long sleeves.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Price

This question is from 10 in. x 40-Tooth General-Purpose Saw Blade
Asked by
Read all my Q&A
March 21, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Yucca Vly CA
Read all my Q&A
Home Improvement Profile: Professional
July 9, 2016
Answer: 
You have to ask, you can't afford it! lol... Reasonable. 15-20 to 75 what you want?
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Peoria, AZ
Read all my Q&A
Home Improvement Profile: DIYer
June 14, 2016
Answer: 
I want to say it was $15? You'd have to check with your local HD. Good blade for the $
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 20, 2016
Answer: 
Michael, thank you for your recent inquiry with The Home Depot. As of May 20th, this item is available on line for $16.97. please note that prices are subject to change without notice. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

What is the kerf

This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
Asked by
Read all my Q&A
November 24, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Brighton Mi.
Read all my Q&A
Home Improvement Profile: DIYer
October 19, 2016
Answer: 
It is the angle of the teeth on the blade , one tip is right , the next is left, The amount of angle is the curf plus the width of the blade that is what is lost in the cut. A extra fine cut blade has a slight kerf, while the course cut has a wider kerf or cut. The cut would be 3/32 " up to 1/8" .
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
CT
Read all my Q&A
Home Improvement Profile: DIYer
January 10, 2016
Answer: 
I totally misunderstood your question in my previous answer & there's no way to delete it. After I wrote it I realized you were asking for the kerf dimension of a particualr blade. I was flumoxed as a result of Home Depot bunching together the questions & reviews of all different Avanti blades of types under the heading of a 10 inch 24 teeth ripping blade I was looking at.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
CT
Read all my Q&A
Home Improvement Profile: DIYer
January 9, 2016
Answer: 
A kerf is the width of the blade's cut or the width of the area the blade turns to sawdust/waste. There's a nominal kerf for a true running blade without any wobble & the actual kerf when used in your saw. A thin kerf cuts more easily, especially in a low power saw but a thick kerf is less likely to deflect when cutting thick stock but uses more power. You can determine the actual kerf by cutting either Read More
A kerf is the width of the blade's cut or the width of the area the blade turns to sawdust/waste. There's a nominal kerf for a true running blade without any wobble & the actual kerf when used in your saw. A thin kerf cuts more easily, especially in a low power saw but a thick kerf is less likely to deflect when cutting thick stock but uses more power. You can determine the actual kerf by cutting either 1/2 depth or not all the way across a piece of wood & measuring the resulting slot. When the kerf is known you'll know how much usable wood you'll get out of a length or width of wood when cutting to size. Read Less
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2
2 »
  • 2016-10-30 T22:56:54.414-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202035214, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT

Customer Reviews

10 in. x 60-Tooth Fine Finish Saw Blade is rated 4.2 out of 5 by 192.
Rated 5 out of 5 by from Throwing Star I had ninja's everywhere, and used all of my throwing stars. I grabbed my 10" 60 tooth finish saw blade and took care of business.
Date published: 2016-09-13
Rated 5 out of 5 by from Cuts like butter to rip long pieces of wood. This is the right blade. Carbide tip is long lasti... Cuts like butter to rip long pieces of wood. This is the right blade. Carbide tip is long lasting.
Date published: 2016-11-11
Rated 4 out of 5 by from After removing a dull blade it was obvious that I made a good choice. However replacing any dull ... After removing a dull blade it was obvious that I made a good choice. However replacing any dull blade with a new sharp one is going to give much better results. I have used it numerous times ripping 2 x 4's with great results. My saw motor did not labor and the cut was smooth. I did notice yesterday that the blade was warbling a bit but I do not think it was a fault of the blade as I didn't tighten it properly, something that hasn't happened before. If you ever want to be completely startled some time don't pay attention when installing your blade. All in all, the cost and performance of this blade is great and if you are a DIYer on a tight budget go ahead and get this one.
Date published: 2017-01-11
Rated 5 out of 5 by from I purchased this blade to replace the blade that came pre-installed on a Skil tablesaw that was a... I purchased this blade to replace the blade that came pre-installed on a Skil tablesaw that was a couple years old and starting to burn wood and stall on every cut. I've used this to make several cuts on everything from plywood to cutting 1/4" coasters out of a 3" hickory branch out of the backyard & it's performed even better than I expected. Cuts have been smooth and easy. Probably not ideal for delicate wood wood, but for my purposes, it's great.
Date published: 2016-12-12
Rated 1 out of 5 by from The arbor hole on this blade was too small to slide over the arbor of my new compound mitre saw. ... The arbor hole on this blade was too small to slide over the arbor of my new compound mitre saw. I've used Avanti blades before and never had this issue. I tried a hundred different ways to slide this on, but would not fit. The hole in the blade is just cut too small. Maybe a QA problem in manufacturing? Anyways, I replaced the next day with a Dewalt blade and it fit perfectly.
Date published: 2017-01-04
Rated 5 out of 5 by from Bought this blade as a replacement for the same blade that was just worn out. I use it on my mite... Bought this blade as a replacement for the same blade that was just worn out. I use it on my miter saw and have found it to be an excellent choice. The blade makes good clean cuts and stays sharp even with extended use for a long time. I highly recommend this blade and the free one just adds to the niceness .
Date published: 2016-12-28
Rated 5 out of 5 by from I purchased this blade to cut 1/4 inch plywood for some shelves I was building and wanted to get ... I purchased this blade to cut 1/4 inch plywood for some shelves I was building and wanted to get a nice clean cut. This blade performed to expectations providing a nice clean cut on my table saw with minimum tear out. I also like the packaging the blade is in, I can store the blade in the plastic holder.
Date published: 2016-11-08
Rated 4 out of 5 by from I need a couple saw blades to use while I was having my Forrest Woodworker2 blades sharpened. Th... I need a couple saw blades to use while I was having my Forrest Woodworker2 blades sharpened. These blades cut as well as my Forrest blades. How long they will last, I don't know. But they will get me through until I get my other blades back.
Date published: 2016-12-16
  • y_2017, m_1, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_192
  • loc_, sid_202035214, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • REVIEWS, PRODUCT