0082474501016

BEHR Premium

Model # 50101

Internet # 100112585

Store SKU # 208561

1-gal. #501 Cedar Naturaltone Transparent Weatherproofing Wood Finish

$33.98 /each
  • Complete weatherproofing protection from the elements
  • Durable advanced 100% Acrylic formula
  • All-In-One wood stain & sealer

Frequently Bought Together

Product Overview

The BEHR Premium 1-gal. Alkyd/Acrylic Natural Cedar Weatherproofing Wood Finish is waterproof to prolong the wood's natural beauty. This finish is ideal for application on exterior wood decks, fences, siding and patio furniture. The alkyd/acrylic formula combines the benefits of an oil-based finish and the convenient cleanup of a water-based product.

California residents: see  Proposition 65 information

  • Ideal for application on exterior wood decks, fences, siding and patio furniture
  • Formulated for a brush-on application
  • Can be applied in temperatures as low as 40 degrees Fahrenheit and to damp wood
  • Alkyd/acrylic formula penetrates wood like an oil-based stain and cleans up with soap and water
  • Silicone-based technology enhances waterproof protection and durability
  • UV protected to resist fading
  • Waterproof formula maintains lasting beauty
  • Click here to learn more about exterior stain products
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Container Size 
1 GA-Gallon 
Coverage Area (sq. ft.) 
300 

Details

Application Method 
Brush 
Coating Product Category 
Stain 
Color Family 
Browns / Tans 
Color/Finish 
Cedar Naturaltone 
Concrete Use 
No 
Deck Use 
Yes 
Dry to touch (min.) 
60 
Interior/Exterior 
Exterior 
Mildew Resistant 
Yes 
Paint Product Type 
Deck and Patio Stain 
Paint/Stain Base Material 
Acrylic 
Paint/Stain Key Features 
Mildew Resistant,UV/Fade Resistant,Waterproof 
Paint/Stain/Waterproofer Product Type 
Deck, House & Concrete 
Returnable 
Non-Returnable 
Sealer 
No 
Substrate/Surface Use Type 
Wood 
Time before recoating (hours) 
2.0 
Tintable 
No 
Transparency 
Clear-Crystal Clear 
UV Resistant 
Yes 
Waterproof 
Yes 

Warranty / Certifications

Manufacturer Warranty 
Limited Warranty 

More Products With These Features

Search

Customer Questions & Answers

38 Questions95 Answers

Customer Questions & Answers

1-gal. #501 Cedar Naturaltone Transparent Weatherproofing Wood Finish
1-gal. #501 Cedar Naturaltone Transparent Weatherproofing Wood Finish

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
5 answers

HOW MUCH WOULD BE NEED FOR 320 SQUARE FOOT (16 X 20)

This question is from 1-gal. #501 Cedar Naturaltone Transparent Weatherproofing Wood Finish
Asked by
CLOUDY, OK
Read all my Q&A
October 15, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Read all my Q&A
May 19, 2016
Answer: 
My deck is 20x22. I live in an area of high summer heat and not much rain so most of the exposure is extensive sunlight. I use 1 gallon to seal my deck every 2 years. By the end of the second year it really needs it. If you tend to get a lot of rain you probably want to do it annually, but one gallon applied with a fiber pad works great for me. My deck is all redwood but the sun had bleached the color Read More
My deck is 20x22. I live in an area of high summer heat and not much rain so most of the exposure is extensive sunlight. I use 1 gallon to seal my deck every 2 years. By the end of the second year it really needs it. If you tend to get a lot of rain you probably want to do it annually, but one gallon applied with a fiber pad works great for me. My deck is all redwood but the sun had bleached the color out of it over time. The cedar color in this stain brings the deck close to its original color after it was first sealed with a transparent sealer. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
NJ
Read all my Q&A
Home Improvement Profile: DIYer
June 2, 2015
Answer: 
ONE GAL. IF ONLY THE FLOOR. TWO IF DOING THE RAILINGS.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
philadelphia
Read all my Q&A
May 21, 2015
Answer: 
Two gallons.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
West Chester, pa
Read all my Q&A
November 10, 2014
Answer: 
My deck is about the same size of yours. I used 2 gallons, and the directions recommend 2 coates. However I did not have any structural members to stain since my deck is a platform that sits almost on the ground. I only had to stain the front band board. My application was probably on the heavy side since my deck has never been stained. Start with a gallon, start staining, get a feel for how far it is Read More
My deck is about the same size of yours. I used 2 gallons, and the directions recommend 2 coates. However I did not have any structural members to stain since my deck is a platform that sits almost on the ground. I only had to stain the front band board. My application was probably on the heavy side since my deck has never been stained. Start with a gallon, start staining, get a feel for how far it is going and how much stain you have left in the bucket. If you need to buy more just remember to mix your stain from the first can into the new can. I am not sure if they sell the stain in quart cans or just gallons. Read Less
User submitted photo
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
October 16, 2014
Answer: 
Hello and thank you for your question. For your project, you'd need 2 gallons BEHR PREMIUM® Semi-Transparent Weatherproofing Wood Finish. 1 gallon of this product has a coverage of 300-350 Sq.Ft. for the first coat and 600-700 Sq. Ft. for the second (second should be thinner which is why it has more coverage). Hope this helps and good luck on your project!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
5 answers

Bought a house w/new pressure tr. wood deck, unsure what kind of wood. Can sealant only be used? Want a clear coating without being slippery?

This question is from 1-gal. #501 Cedar Naturaltone Transparent Weatherproofing Wood Finish
Asked by
Dave
Pasadena, Md.
September 28, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
NJ
Read all my Q&A
Home Improvement Profile: DIYer
July 18, 2016
Answer: 
Yes. I used this product on a new pressure treated wood deck. After it dries it is not very slippery.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
North Central Texas
Read all my Q&A
April 26, 2014
Answer: 
Hubby did the pressure tr. wood floor of my greenhouse with the finish and it looks and seems to be wearing great. See if you can get a sample or small can and try it on a not so noticeable spot. I'd add a photo of the fence but our Internet is being moody (too slow).
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
LI, NY
Read all my Q&A
October 27, 2013
Answer: 
Clearcoating won't give you UV protection and the Behr is FAR from clear.
Skip Thomsons, useless. A better brand will give you 2-3 years if you've properly prepped the wood. Getting late in the year.
In any case, do your homework, Behr was a nightmare to remove after it failed on me. Went with TWP though I read Armstrong is a great product and Sherwin Williams was OK rated. Other brands, not so much Read More
Clearcoating won't give you UV protection and the Behr is FAR from clear.
Skip Thomsons, useless. A better brand will give you 2-3 years if you've properly prepped the wood. Getting late in the year.
In any case, do your homework, Behr was a nightmare to remove after it failed on me. Went with TWP though I read Armstrong is a great product and Sherwin Williams was OK rated. Other brands, not so much (past the first few months). Read Less
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Read all my Q&A
October 1, 2013
Answer: 
Dear Dave,
BEHR Transparent Wood Finishes are recommended for properly prepared new to slightly weathered, unsealed exterior surfaces. These wood finishes allow the natural pattern of the wood to show through while adding a subtle color. BEHR Wood Stains & Finishes pass the coefficient of friction (slip resistance) test. Please follow all label instructions.
Thank you for your inquiry.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

October 1, 2013
Answer: 
Absolutely Dave!
Clear coats like Behr Transparent are penetrating sealers.
When used according to The Manufacturer, they absorb into the wood.
This leaves the surface traction of the wood intact.
NOTE:
Paints are surface coatings that sit on top of the wood.
It is much more likely that paint would be slippery.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
4 answers

Have an old western cedar deck in fair to good condition,. Have power washed - water only. Will the Behr Product work for me. Any sugggestions?

This question is from 1-gal. #501 Cedar Naturaltone Transparent Weatherproofing Wood Finish
Asked by
Flip
St Louis, Mo
August 12, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
NJ
Read all my Q&A
Home Improvement Profile: DIYer
July 18, 2016
Answer: 
Yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Allen, Tx
Read all my Q&A
Home Improvement Profile: DIYer
June 10, 2014
Answer: 
Yes with long lasting finish
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
LI, NY
Read all my Q&A
October 27, 2013
Answer: 
Find another product. Behr has worked horribly, done it twice. Research a better product. I've tested TWP products on my deck and I've decided to go with one of those.
It's not just a question of money, but the amount of hours spent stripping and refinishing. A real headache.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
August 13, 2013
Answer: 
Dear Flip,
Depending on the look you want and the condition of your deck, we have the following options for you:
1. BEHR Semi-Transparent Wood Stains will allow the wood grain and texture to show through while adding a subtle color to your deck. These stains are recommended for properly prepared new to moderately weathered, unsealed exterior wood surfaces (0-10 years exposure).
2. BEHR Solid Color Read More
Dear Flip,
Depending on the look you want and the condition of your deck, we have the following options for you:
1. BEHR Semi-Transparent Wood Stains will allow the wood grain and texture to show through while adding a subtle color to your deck. These stains are recommended for properly prepared new to moderately weathered, unsealed exterior wood surfaces (0-10 years exposure).
2. BEHR Solid Color Wood Stains will hide blemishes, imperfections and signs of aging wood with an even, uniform appearance. These stains are recommended for properly prepared new to heavily weathered or aged wood surfaces (0-15+ years exposure).
Please follow all label instructions.
Thank you for the inquiry! Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
4 answers

how many square feet does a gallon cover?

This question is from 1-gal. #501 Cedar Naturaltone Transparent Weatherproofing Wood Finish
Asked by
connie
July 13, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Ft. Lauderdale
Read all my Q&A
Home Improvement Profile: DIYer
July 8, 2014
Answer: 
2 Thin Coats are Required and for best results you Must Prep Before Staining...
Container Size -1 GA-Gallon
1st Coat approximately 250-300 Sq. Ft
2nd Coat approximately 500-600 Sq. Ft.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Allen, Tx
Read all my Q&A
Home Improvement Profile: DIYer
June 10, 2014
Answer: 
At least 400 square feet.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
DC Metropolitan Area
Read all my Q&A
August 4, 2013
Answer: 
1st coat covers 300-350 Sq. Ft.
2nd coat covers 600-700 Sq. Ft.
+11points
11out of 11found this answer helpful.
Was this helpful?helpful11unhelpful0

Asked by
Read all my Q&A
July 15, 2013
Answer: 
Dear Connie,
BEHR Premium Transparent Weatherproofing All-In-One Wood Finish will cover approximately 300-350 sq. ft. (1st coat) and 600-700 sq. ft. (2nd coat) per gallon depending on surface texture, porosity and application method. Please make sure you apply two thin coats.
Thank you for posting the question!
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
2 3 »
  • 2016-07-19 T15:29:01.538-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100112585, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 115ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.0 out of 5 by 181 reviewers.
Rated 5.0 out of 5.0 by Best Purchase! Easy to apply and finished product looks great. Used it on another fence a few years ago and still looks great! Also, built a fort and repaired lawn chairs and chaise with wood and used this product to stain them. July 1, 2016
Rated 4.0 out of 5.0 by Very good product. Easy to apply. One coat gave very good coverage without sanding and cleaning. This wood finish was purchased as a sealer and stain for an east/west facing side gate with weathered redwood slats. It was easy to apply, looked great, and covered well. I did not sand or clean the weathered wood as I know I should have, but the product painted and covered so good on the first slat I decided to save some time and stain. The stain has not yet been time and weather tested, but so far it has been a great product. May 11, 2016
Rated 4.0 out of 5.0 by I have been using this product for years, Very easy to apply with brush or roller also used this product as a stain and finished with poly. satin varnish on inside cabinets. May 10, 2016
Rated 5.0 out of 5.0 by Excellent product I replaced the wood on my deck, it was plain treated lumber. After putting this stain on my deck I was floored! Wow it looked incredible. I used 2 cans just for extra coverage. It stays clean even with 3 dog. All I do is water it down and the water beads off. It was easy to roll on with an extra wide roller. I put on the second coat 2 hot days later. I love the cedar color. If you look at the pic to get the dark stripes I used some older boards that were good that were just darker and then you add the stain and it is incredible. March 8, 2016
Rated 5.0 out of 5.0 by Fantastic Product I never used this before but it went on great! I have to be more aware of drips as they dry that way. But it looks amazing. It's been a week or two now so I went and hosed down the fence and it beaded up. It looks Fantastic! July 19, 2016
Rated 5.0 out of 5.0 by Little more dramatic than expected but love results At first I thought I wanted my new porch railing to remain natural Western Red Cedar. Then felt like it needed a slight tint to it. In the store the sample looked more subtle than my results....but I really like the results I got. Very easy to apply...though I used a deck brush and applied first coat before installing the boards. The second coat was applied after. January 30, 2016
Rated 5.0 out of 5.0 by Very good stain! very easy to apply (use a roller!) and dries in a reasonable timeframe. July 12, 2016
Rated 5.0 out of 5.0 by Excellent quality Excellent quality and "color". Preserves wood texture! July 5, 2016
  • 2016-07-19 T16:12:41.348-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_181, tr_181
  • loc_en_US, sid_100112585, prod, sort_default
2 3 4 5  ... 7 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • REVIEWS, PRODUCT